Outdoor LED Recessed Profile- Waterproof - FLOOR12 - Silver - 2 meter - Indoor Floor lighting- Bathroom- Garden

Outdoor LED Recessed Profile- Waterproof - FLOOR12 -  Silver - 2 meter - Indoor Floor lighting- Bathroom- Garden

FLOOR12 LED aluminum inlet profile made of anodized aluminum with high scratch resistance. The LED strip profile is perfect for floor lighting, but also in corridors, vestibules and bathrooms. It also fits well in passageways and stairs, while giving each surface an innovative and subtle character. The LED FLOOR12 aluminum strip thanks to its special construction and durable lampshade (resistant to abrasion) is ideally suited for floor use - withstands the weight of passing people  (degree of protection against mechanical impacts - IK08 - 5J).

Another and at the same time a very important advantage of the FLOOR12 product is the fact that the profile is suitable for use in a humid environment (e.g. bathrooms, corridors), where washing or abrasion of the floor is inevitable. In conditions of increased humidity, it is recommended to seal the profile with silicone, install a sealing set and use waterproof tape. An alternative sealing method may also be complete silicone filling of the mounted profile.

Max. 12mm LED Strips Light

Varius Lenghts:

Remember that each profile can be cut to the specified size, we perform this service at no extra cost, as well as our LED strips with additional wires. This service is very popular because it makes installation of the LED profile very easy, all you have to do is install the holders and connect the LED cables to the LED Driver.
Application:

The LED aluminum profile is also an excellent heat sink, thanks to which the heat extracted from the LED source will be perfectly dissipated. This solution creates, above all, better conditions for diodes, significantly extending .lifespan. The LED aluminum strip is an excellent protection of the LED strip against mechanical damage and also makes the installation much more durable compared to direct sticking the strip to the ground. The use of the LED profile significantly increases its aesthetics and also helps maintain cleanliness for the entire installation
Assembly :

- handle " U"
-  The size of the profile and the simple form significantly expands the usability and design. The LED FLOOR12 profile can be mounted to the mounting space (e.g. floor) using dedicated handle clamps "U" (with two levels of attachment - with or without distance to the mounting surface) It can also be mounted on screws, professional double-sided adhesive tapes or mounting adhesives . In order to achieve full aesthetics, the LED strip profile should be finished with endcaps.