This addressable RGB+WW COB LED strip pairs full-colour RGB with a dedicated 3000K Warm White channel in a single spotless 12mm tape, individually controllable pixel by pixel over SPI or DMX. Unlike a standard analog RGBW strip that changes the whole run at once, this digital version lets you drive chases, gradients and pixel effects while keeping a cosy, usable Warm White for everyday lighting - all from one 24V strip with a dot-free COB face.
|
Parameter |
Value |
|
SKU |
COBD-840-RGBWW-507 |
|
Chip type |
COB (Spotless) |
|
Colour |
RGBW (RGB + Warm White) |
|
Colour temperature (white channel) |
3000K (Warm White) |
|
LEDs per metre |
840 |
|
Voltage |
24V DC |
|
Power per metre |
16W |
|
Luminous flux |
730 lm/m |
|
CRI |
Ra90 |
|
Ingress protection |
IP20 (non-waterproof) |
|
Strip width |
12mm |
|
Copper trace thickness |
2oz |
|
PCB layers |
Double layer (PRO Version) |
|
Control protocol |
Addressable Digital SPI / DMX |
|
Roll length |
30m (full roll) |
Choose this addressable RGB+WW version if you want dynamic, pixel-level effects (colour chases, gradients, animations) and a cosy Warm White for normal lighting - all in one strip. Pick the RGB+NW 4000K version instead if you prefer a neutral, daylight-balanced white for the everyday setting; the warm 3000K here suits relaxed, homely spaces, while 4000K reads cleaner and more functional. If you only ever need static single colours or plain white, a standard (non-addressable) RGBW or white COB strip will be simpler and cheaper to control. This is an IP20 strip for dry indoor use only; for moisture-prone areas (bathroom, kitchen splash zones, outdoors), choose a waterproof IP-rated version.
This strip runs on a dedicated 24V DC power supply and cannot be connected directly to mains - size the driver with roughly 20% spare headroom. Because it is addressable, it also needs a compatible SPI / DMX controller or decoder to drive the pixel data; a plain analog RGBW controller will not work. Cut only at the marked cut points along the strip, and mount it in a suitable aluminium profile for the best heat dissipation and finish.
Each section of the strip can be controlled individually (pixel by pixel) via an SPI or DMX signal, so you can create effects like chases and gradients, not just one solid colour across the whole run.
A standard RGBW strip changes colour as one block. This digital version adds an IC-driven data line so the strip is individually addressable, while still giving you the same RGB + 3000K Warm White output.
3000K is a warmer, cosier white that suits homely, relaxed spaces; 4000K is a neutral, daylight-balanced white that looks cleaner and more functional. Colour (RGB) behaviour and all other specs are the same.
No — it's rated IP20 with no protection against moisture. For wet or outdoor areas, choose a waterproof (IP-rated) version instead.
Yes. It requires an SPI / DMX-compatible controller or decoder to run the addressable effects, plus a standard 24V DC driver for power.
| Color Changing | RGBW |
|---|---|
| Watts per meter | 16 |
| Water Resistance | IP20 Non Waterproof |
| Voltage | 24V |
| Lumens per meter | 730 |
| Number of LEDs/ Meter | 840 |
This addressable RGB+WW COB LED strip pairs full-colour RGB with a dedicated 3000K Warm White channel in a single spotless 12mm tape, individually controllable pixel by pixel over SPI or DMX. Unlike a standard analog RGBW strip that changes the whole run at once, this digital version lets you drive chases, gradients and pixel effects while keeping a cosy, usable Warm White for everyday lighting - all from one 24V strip with a dot-free COB face.
|
Parameter |
Value |
|
SKU |
COBD-840-RGBWW-507 |
|
Chip type |
COB (Spotless) |
|
Colour |
RGBW (RGB + Warm White) |
|
Colour temperature (white channel) |
3000K (Warm White) |
|
LEDs per metre |
840 |
|
Voltage |
24V DC |
|
Power per metre |
16W |
|
Luminous flux |
730 lm/m |
|
CRI |
Ra90 |
|
Ingress protection |
IP20 (non-waterproof) |
|
Strip width |
12mm |
|
Copper trace thickness |
2oz |
|
PCB layers |
Double layer (PRO Version) |
|
Control protocol |
Addressable Digital SPI / DMX |
|
Roll length |
30m (full roll) |
Choose this addressable RGB+WW version if you want dynamic, pixel-level effects (colour chases, gradients, animations) and a cosy Warm White for normal lighting - all in one strip. Pick the RGB+NW 4000K version instead if you prefer a neutral, daylight-balanced white for the everyday setting; the warm 3000K here suits relaxed, homely spaces, while 4000K reads cleaner and more functional. If you only ever need static single colours or plain white, a standard (non-addressable) RGBW or white COB strip will be simpler and cheaper to control. This is an IP20 strip for dry indoor use only; for moisture-prone areas (bathroom, kitchen splash zones, outdoors), choose a waterproof IP-rated version.
This strip runs on a dedicated 24V DC power supply and cannot be connected directly to mains - size the driver with roughly 20% spare headroom. Because it is addressable, it also needs a compatible SPI / DMX controller or decoder to drive the pixel data; a plain analog RGBW controller will not work. Cut only at the marked cut points along the strip, and mount it in a suitable aluminium profile for the best heat dissipation and finish.
Each section of the strip can be controlled individually (pixel by pixel) via an SPI or DMX signal, so you can create effects like chases and gradients, not just one solid colour across the whole run.
A standard RGBW strip changes colour as one block. This digital version adds an IC-driven data line so the strip is individually addressable, while still giving you the same RGB + 3000K Warm White output.
3000K is a warmer, cosier white that suits homely, relaxed spaces; 4000K is a neutral, daylight-balanced white that looks cleaner and more functional. Colour (RGB) behaviour and all other specs are the same.
No — it's rated IP20 with no protection against moisture. For wet or outdoor areas, choose a waterproof (IP-rated) version instead.
Yes. It requires an SPI / DMX-compatible controller or decoder to run the addressable effects, plus a standard 24V DC driver for power.
+353 24 904 96
