This Ultra Soft Warm COB LED strip gives a warm, amber 2200K glow on a slim 8mm tape, with a continuous, dot-free line of light and a soft 810 lm/m output. The double PCB layer with 2oz copper paths keeps voltage drop and running temperature low, making it a great choice for cosy, atmospheric accent lighting.
|
Parameter |
Value |
|
SKU |
COB-480-UHW-469 |
|
Chip type |
COB (Spotless) |
|
Light type |
Ultra Soft Warm White (single colour) |
|
Colour temperature |
2200K (Ultra Soft Warm) |
|
LEDs per metre |
480 |
|
Voltage |
24V DC |
|
Power per metre |
10W |
|
Luminous flux |
810 lm/m |
|
Beam angle |
>160° |
|
Ingress protection |
IP20 (non-waterproof) |
|
Strip width |
8mm |
|
Copper trace thickness |
2oz |
|
PCB layers |
Double layer (PRO Version) |
|
Cut points |
Every 5cm |
|
Lifespan |
50,000h |
|
Roll length |
30m (full roll) |
Choose this 2200K Ultra Soft Warm version if you want a warm, amber, cosy glow that's slightly cleaner than the deepest amber tone. For an even warmer, more golden look, pick 1800K Amber Warm White; for a slightly cleaner warm, step up to 2700K Soft Warm, or go higher (3000K, 4000K, 6000K) for more functional white. At 810 lm/m it suits ambient and accent lighting rather than main task light. This is an IP20 strip for dry indoor use only; for moisture-prone areas (bathroom, kitchen splash zones, outdoors), choose a waterproof IP-rated version.
This strip requires a dedicated 24V DC power supply and cannot be connected directly to mains - size the driver with roughly 20% spare headroom (the configurator suggests ~12W or higher per metre). A controller is only needed if you want dimming; for a fixed Ultra Soft Warm strip like this, a simple 24V driver is sufficient. Cut only at the marked cut points (every 5cm), and mount it in a suitable aluminium profile for the best heat dissipation and finish.
It's an ultra-warm, amber white — warmer than 2700K but slightly cleaner than 1800K — giving a cosy, atmospheric glow.
Every 5cm, at the marked cut points — trimming there won't damage the rest of the strip.
At 810 lm/m it's an ambient/accent-level output — great for mood lighting, but for a main task light choose a brighter, cooler strip.
No — it's rated IP20 with no protection against moisture. For wet or outdoor areas, choose a waterproof (IP-rated) version instead.
No. It runs from a standard 24V DC driver. You only need a controller if you want dimming.
| HUE Color | 2200K Ultra Soft Warm |
|---|---|
| Watts per meter | 10 |
| Water Resistance | IP20 Non Waterproof |
| Voltage | 24V |
| Lumens per meter | 810 |
| Number of LEDs/ Meter | 480 |
From €16.63 €13.52
To €33.04 €26.86
From €25.83 €21.00
To €42.24 €34.34
From €66.68 €54.21
To €110.56 €89.89
From €44.64 €36.29
To €60.31 €49.03
From €52.28 €42.50
To €79.94 €64.99
From €32.94 €26.78
To €59.06 €48.02
This Ultra Soft Warm COB LED strip gives a warm, amber 2200K glow on a slim 8mm tape, with a continuous, dot-free line of light and a soft 810 lm/m output. The double PCB layer with 2oz copper paths keeps voltage drop and running temperature low, making it a great choice for cosy, atmospheric accent lighting.
|
Parameter |
Value |
|
SKU |
COB-480-UHW-469 |
|
Chip type |
COB (Spotless) |
|
Light type |
Ultra Soft Warm White (single colour) |
|
Colour temperature |
2200K (Ultra Soft Warm) |
|
LEDs per metre |
480 |
|
Voltage |
24V DC |
|
Power per metre |
10W |
|
Luminous flux |
810 lm/m |
|
Beam angle |
>160° |
|
Ingress protection |
IP20 (non-waterproof) |
|
Strip width |
8mm |
|
Copper trace thickness |
2oz |
|
PCB layers |
Double layer (PRO Version) |
|
Cut points |
Every 5cm |
|
Lifespan |
50,000h |
|
Roll length |
30m (full roll) |
Choose this 2200K Ultra Soft Warm version if you want a warm, amber, cosy glow that's slightly cleaner than the deepest amber tone. For an even warmer, more golden look, pick 1800K Amber Warm White; for a slightly cleaner warm, step up to 2700K Soft Warm, or go higher (3000K, 4000K, 6000K) for more functional white. At 810 lm/m it suits ambient and accent lighting rather than main task light. This is an IP20 strip for dry indoor use only; for moisture-prone areas (bathroom, kitchen splash zones, outdoors), choose a waterproof IP-rated version.
This strip requires a dedicated 24V DC power supply and cannot be connected directly to mains - size the driver with roughly 20% spare headroom (the configurator suggests ~12W or higher per metre). A controller is only needed if you want dimming; for a fixed Ultra Soft Warm strip like this, a simple 24V driver is sufficient. Cut only at the marked cut points (every 5cm), and mount it in a suitable aluminium profile for the best heat dissipation and finish.
It's an ultra-warm, amber white — warmer than 2700K but slightly cleaner than 1800K — giving a cosy, atmospheric glow.
Every 5cm, at the marked cut points — trimming there won't damage the rest of the strip.
At 810 lm/m it's an ambient/accent-level output — great for mood lighting, but for a main task light choose a brighter, cooler strip.
No — it's rated IP20 with no protection against moisture. For wet or outdoor areas, choose a waterproof (IP-rated) version instead.
No. It runs from a standard 24V DC driver. You only need a controller if you want dimming.
+353 24 904 96
