This Natural White COB LED strip gives a clean, neutral 4000K light on a slim 8mm tape, with a continuous, dot-free line of light and a bright 970 lm/m output. The double PCB layer with 2oz copper paths keeps voltage drop and running temperature low, making it a great choice for bright, neutral indoor lighting.
|
Parameter |
Value |
|
SKU |
COB-480-NW-430 |
|
Chip type |
COB (Spotless) |
|
Light type |
Natural White (single colour) |
|
Colour temperature |
4000K (Natural White) |
|
LEDs per metre |
480 |
|
Voltage |
24V DC |
|
Power per metre |
10W |
|
Luminous flux |
970 lm/m |
|
Beam angle |
>160° |
|
Ingress protection |
IP20 (non-waterproof) |
|
Strip width |
8mm |
|
Strip dimensions (IP20) |
8.0 × 1.6 mm |
|
Copper trace thickness |
2oz |
|
PCB layers |
Double layer (PRO Version) |
|
Cut points |
Every 5cm |
|
Lifespan |
50,000h |
|
Roll length |
30m (full roll) |
Choose this 4000K Natural White version if you want a neutral, daylight-balanced white for everyday and task lighting - clean and functional for kitchens, offices, hallways and living spaces. The same COB series is also available in 2700K Soft Warm, 3000K Warm White and 6000K Cold White; step warmer for a cosier feel or cooler for maximum clarity. This is an IP20 strip for dry indoor use only; if the run will face moisture (bathroom, kitchen splash zones, outdoors), choose the IP66 waterproof version of the same series. At 970 lm/m it's bright enough for both task and ambient use.
This strip requires a dedicated 24V DC power supply and cannot be connected directly to mains - size the driver with roughly 20% spare headroom (the configurator suggests ~12W or higher per metre). A controller is only needed if you want dimming; for a fixed Natural White strip like this, a simple 24V driver is sufficient. Cut only at the marked cut points (every 5cm), and mount it in a suitable aluminium profile for the best heat dissipation and finish.
It's a neutral, daylight-balanced white with no yellow or blue cast — clean and functional for almost any room.
Every 5cm, at the marked cut points — trimming there won't damage the rest of the strip.
4000K is neutral and clean; 3000K is warmer and cosier. Everything else about the strip stays the same.
No — it's rated IP20 with no protection against moisture. For wet or outdoor areas, choose the IP66 version of the same series instead.
No. It runs from a standard 24V DC driver. You only need a controller if you want dimming.
| HUE Color | 4000K Natural White |
|---|---|
| Watts per meter | 10 |
| Water Resistance | IP20 Non Waterproof |
| Voltage | 24V |
| Lumens per meter | 970 |
| Number of LEDs/ Meter | 480 |
From €16.63 €13.52
To €33.04 €26.86
From €25.83 €21.00
To €42.24 €34.34
From €66.68 €54.21
To €110.56 €89.89
From €44.64 €36.29
To €60.31 €49.03
From €52.28 €42.50
To €79.94 €64.99
From €32.94 €26.78
To €59.06 €48.02
This Natural White COB LED strip gives a clean, neutral 4000K light on a slim 8mm tape, with a continuous, dot-free line of light and a bright 970 lm/m output. The double PCB layer with 2oz copper paths keeps voltage drop and running temperature low, making it a great choice for bright, neutral indoor lighting.
|
Parameter |
Value |
|
SKU |
COB-480-NW-430 |
|
Chip type |
COB (Spotless) |
|
Light type |
Natural White (single colour) |
|
Colour temperature |
4000K (Natural White) |
|
LEDs per metre |
480 |
|
Voltage |
24V DC |
|
Power per metre |
10W |
|
Luminous flux |
970 lm/m |
|
Beam angle |
>160° |
|
Ingress protection |
IP20 (non-waterproof) |
|
Strip width |
8mm |
|
Strip dimensions (IP20) |
8.0 × 1.6 mm |
|
Copper trace thickness |
2oz |
|
PCB layers |
Double layer (PRO Version) |
|
Cut points |
Every 5cm |
|
Lifespan |
50,000h |
|
Roll length |
30m (full roll) |
Choose this 4000K Natural White version if you want a neutral, daylight-balanced white for everyday and task lighting - clean and functional for kitchens, offices, hallways and living spaces. The same COB series is also available in 2700K Soft Warm, 3000K Warm White and 6000K Cold White; step warmer for a cosier feel or cooler for maximum clarity. This is an IP20 strip for dry indoor use only; if the run will face moisture (bathroom, kitchen splash zones, outdoors), choose the IP66 waterproof version of the same series. At 970 lm/m it's bright enough for both task and ambient use.
This strip requires a dedicated 24V DC power supply and cannot be connected directly to mains - size the driver with roughly 20% spare headroom (the configurator suggests ~12W or higher per metre). A controller is only needed if you want dimming; for a fixed Natural White strip like this, a simple 24V driver is sufficient. Cut only at the marked cut points (every 5cm), and mount it in a suitable aluminium profile for the best heat dissipation and finish.
It's a neutral, daylight-balanced white with no yellow or blue cast — clean and functional for almost any room.
Every 5cm, at the marked cut points — trimming there won't damage the rest of the strip.
4000K is neutral and clean; 3000K is warmer and cosier. Everything else about the strip stays the same.
No — it's rated IP20 with no protection against moisture. For wet or outdoor areas, choose the IP66 version of the same series instead.
No. It runs from a standard 24V DC driver. You only need a controller if you want dimming.
+353 24 904 96
