This COB RGB+WW LED strip combines full-colour RGB with a dedicated 3000K Warm White channel in a single spotless 12mm tape - four colours in one diode, giving both vivid colour effects and a cosy, usable warm white. With 896 LEDs/m it delivers a continuous, dot-free line of light, while the double PCB layer with 2oz copper paths keeps voltage drop and running temperature low.
|
Parameter |
Value |
|
SKU |
COB-896-RGBWW-440 |
|
Chip type |
COB (Spotless) |
|
Colour |
RGBW (RGB + Warm White) |
|
Colour temperature (white channel) |
3000K (Warm White) |
|
LEDs per metre |
896 |
|
Voltage |
24V DC |
|
Power per metre |
16W |
|
Luminous flux |
680 lm/m |
|
Ingress protection |
IP20 (non-waterproof) |
|
Strip width |
12mm |
|
Strip dimensions (IP20) |
12.0 × 2.0 mm |
|
Copper trace thickness |
2oz |
|
PCB layers |
Double layer (PRO Version) |
|
Wiring |
5-core (RGB + W) |
|
Adhesive |
3M 300 LSE |
|
Cut points |
Every 6.25cm |
|
Lifespan |
50,000h |
|
Roll length |
30m (full roll) |
Choose this RGB+WW version if you want full colour effects plus a cosy 3000K Warm White for everyday lighting - all from one strip. The same COB RGB+White series is also available with 4000K Natural White and 6000K Cold White channels, in 30 or 60 LED white-density options, and in a waterproof IP66 build; pick a cooler white for cleaner light, or the IP66 version if the run will face moisture. If you only ever need static single colours or plain white, a standard non-RGB strip will be simpler to control. This is an IP20 strip for dry indoor use only; for moisture-prone areas, choose the IP66 version instead.
This strip runs on a dedicated 24V DC power supply and cannot be connected directly to mains - size the driver with roughly 20% spare headroom (the configurator suggests ~19W or higher per metre). Because it's an RGB+White strip it needs 5-core wiring and a compatible RGBW controller; a plain single-colour dimmer won't drive the colour channels. Cut only at the marked cut points (every 6.25cm), and mount it in a suitable aluminium profile for the best heat dissipation and finish.
Each COB diode combines red, green and blue with a dedicated Warm White, so you get full RGB colour plus a real, usable 3000K white from a single strip.
It needs an RGBW controller and 5-core wiring (RGB + white), plus a standard 24V DC driver for power.
Every 6.25cm, at the marked cut points — trimming there won't damage the rest of the strip.
No — it's rated IP20 with no protection against moisture. For wet or outdoor areas, choose the IP66 version of the same series instead.
| HUE Color | 3000K Warm White |
|---|---|
| Color Changing | RGBW |
| Watts per meter | 16 |
| Water Resistance | IP20 Non Waterproof |
| Voltage | 24V |
| Lumens per meter | 680 |
| Number of LEDs/ Meter | 896 |
From €14.76 €12.00
To €28.14 €22.88
From €28.08 €22.83
To €44.49 €36.17
From €20.91 €17.00
To €35.47 €28.84
From €34.44 €28.00
To €80.00 €65.04
From €48.25 €39.23
To €65.76 €53.46
From €71.04 €57.76
To €107.63 €87.50
This COB RGB+WW LED strip combines full-colour RGB with a dedicated 3000K Warm White channel in a single spotless 12mm tape - four colours in one diode, giving both vivid colour effects and a cosy, usable warm white. With 896 LEDs/m it delivers a continuous, dot-free line of light, while the double PCB layer with 2oz copper paths keeps voltage drop and running temperature low.
|
Parameter |
Value |
|
SKU |
COB-896-RGBWW-440 |
|
Chip type |
COB (Spotless) |
|
Colour |
RGBW (RGB + Warm White) |
|
Colour temperature (white channel) |
3000K (Warm White) |
|
LEDs per metre |
896 |
|
Voltage |
24V DC |
|
Power per metre |
16W |
|
Luminous flux |
680 lm/m |
|
Ingress protection |
IP20 (non-waterproof) |
|
Strip width |
12mm |
|
Strip dimensions (IP20) |
12.0 × 2.0 mm |
|
Copper trace thickness |
2oz |
|
PCB layers |
Double layer (PRO Version) |
|
Wiring |
5-core (RGB + W) |
|
Adhesive |
3M 300 LSE |
|
Cut points |
Every 6.25cm |
|
Lifespan |
50,000h |
|
Roll length |
30m (full roll) |
Choose this RGB+WW version if you want full colour effects plus a cosy 3000K Warm White for everyday lighting - all from one strip. The same COB RGB+White series is also available with 4000K Natural White and 6000K Cold White channels, in 30 or 60 LED white-density options, and in a waterproof IP66 build; pick a cooler white for cleaner light, or the IP66 version if the run will face moisture. If you only ever need static single colours or plain white, a standard non-RGB strip will be simpler to control. This is an IP20 strip for dry indoor use only; for moisture-prone areas, choose the IP66 version instead.
This strip runs on a dedicated 24V DC power supply and cannot be connected directly to mains - size the driver with roughly 20% spare headroom (the configurator suggests ~19W or higher per metre). Because it's an RGB+White strip it needs 5-core wiring and a compatible RGBW controller; a plain single-colour dimmer won't drive the colour channels. Cut only at the marked cut points (every 6.25cm), and mount it in a suitable aluminium profile for the best heat dissipation and finish.
Each COB diode combines red, green and blue with a dedicated Warm White, so you get full RGB colour plus a real, usable 3000K white from a single strip.
It needs an RGBW controller and 5-core wiring (RGB + white), plus a standard 24V DC driver for power.
Every 6.25cm, at the marked cut points — trimming there won't damage the rest of the strip.
No — it's rated IP20 with no protection against moisture. For wet or outdoor areas, choose the IP66 version of the same series instead.
+353 24 904 96
