This waterproof COB RGB+WW LED strip combines full-colour RGB with a dedicated 3000K Warm White channel in a single spotless 12.3mm tape - four colours in one diode, rated IP66 for outdoor and wet areas. With 896 LEDs/m it delivers a continuous, dot-free line of light, while the double PCB layer with 2oz copper paths keeps voltage drop and running temperature low.
|
Parameter |
Value |
|
SKU |
COB-896-RGBWW-66-443 |
|
Chip type |
COB (Spotless) |
|
Colour |
RGBW (RGB + Warm White) |
|
Colour temperature (white channel) |
3000K (Warm White) |
|
LEDs per metre |
896 |
|
Voltage |
24V DC |
|
Power per metre |
16W |
|
Luminous flux |
680 lm/m |
|
Ingress protection |
IP66 (waterproof) |
|
Strip width |
12.3mm |
|
Strip dimensions (IP66) |
12.3 × 2.3 mm |
|
Copper trace thickness |
2oz |
|
PCB layers |
Double layer (PRO Version) |
|
Wiring |
5-core (RGB + W) |
|
Adhesive |
3M 300 LSE |
|
Cut points |
Every 6.25cm |
|
Lifespan |
50,000h |
|
Roll length |
10m (full roll) |
Choose this waterproof IP66 RGB+WW version if you want full colour effects plus a cosy 3000K Warm White in areas that face moisture - outdoor facades, garden features, bathrooms or kitchen splash zones. The same COB RGB+White series is also available with 4000K Natural White and 6000K Cold White channels, in 30 or 60 LED white-density options, and in a dry IP20 build; pick a cooler white for cleaner light, or the IP20 version if the run is fully indoors and dry. If you only ever need static single colours, a standard non-RGB strip will be simpler to control.
This strip runs on a dedicated 24V DC power supply and cannot be connected directly to mains - size the driver with roughly 20% spare headroom (the configurator suggests ~19W or higher per metre). Because it's an RGB+White strip it needs 5-core wiring and a compatible RGBW controller; a plain single-colour dimmer won't drive the colour channels. It is waterproof (IP66) and suitable for outdoor and wet areas; still use waterproof connectors and an appropriately rated driver for outdoor runs. Cut only at the marked cut points (every 6.25cm), and mount it in a suitable aluminium profile for the best heat dissipation and finish.
Rated IP66, this strip is protected against powerful water jets and heavy splashes, making it suitable for outdoor use, facades, garden and landscape features, and wet indoor areas such as bathrooms and kitchens. For a fully weatherproof result, pair it with waterproof connectors and an IP-rated (IP67) driver, and seal cut ends correctly.
Yes — it's rated IP66, so it's protected against heavy water jets and splashes, making it suitable for outdoor, garden and wet-area installations.
Each COB diode combines red, green and blue with a dedicated Warm White, so you get full RGB colour plus a real, usable 3000K white from a single strip.
It needs an RGBW controller and 5-core wiring (RGB + white), plus a standard 24V DC driver for power.
Every 6.25cm, at the marked cut points — trimming there won't damage the rest of the strip.
| HUE Color | 3000K Warm White |
|---|---|
| Color Changing | RGBW |
| Watts per meter | 16 |
| Water Resistance | IP66 Heat Shrink WP |
| Voltage | 24V |
| Lumens per meter | 680 |
| Number of LEDs/ Meter | 896 |
From €14.76 €12.00
To €28.14 €22.88
From €28.08 €22.83
To €44.49 €36.17
From €20.91 €17.00
To €35.47 €28.84
From €34.44 €28.00
To €80.00 €65.04
From €48.25 €39.23
To €65.76 €53.46
From €71.04 €57.76
To €107.63 €87.50
This waterproof COB RGB+WW LED strip combines full-colour RGB with a dedicated 3000K Warm White channel in a single spotless 12.3mm tape - four colours in one diode, rated IP66 for outdoor and wet areas. With 896 LEDs/m it delivers a continuous, dot-free line of light, while the double PCB layer with 2oz copper paths keeps voltage drop and running temperature low.
|
Parameter |
Value |
|
SKU |
COB-896-RGBWW-66-443 |
|
Chip type |
COB (Spotless) |
|
Colour |
RGBW (RGB + Warm White) |
|
Colour temperature (white channel) |
3000K (Warm White) |
|
LEDs per metre |
896 |
|
Voltage |
24V DC |
|
Power per metre |
16W |
|
Luminous flux |
680 lm/m |
|
Ingress protection |
IP66 (waterproof) |
|
Strip width |
12.3mm |
|
Strip dimensions (IP66) |
12.3 × 2.3 mm |
|
Copper trace thickness |
2oz |
|
PCB layers |
Double layer (PRO Version) |
|
Wiring |
5-core (RGB + W) |
|
Adhesive |
3M 300 LSE |
|
Cut points |
Every 6.25cm |
|
Lifespan |
50,000h |
|
Roll length |
10m (full roll) |
Choose this waterproof IP66 RGB+WW version if you want full colour effects plus a cosy 3000K Warm White in areas that face moisture - outdoor facades, garden features, bathrooms or kitchen splash zones. The same COB RGB+White series is also available with 4000K Natural White and 6000K Cold White channels, in 30 or 60 LED white-density options, and in a dry IP20 build; pick a cooler white for cleaner light, or the IP20 version if the run is fully indoors and dry. If you only ever need static single colours, a standard non-RGB strip will be simpler to control.
This strip runs on a dedicated 24V DC power supply and cannot be connected directly to mains - size the driver with roughly 20% spare headroom (the configurator suggests ~19W or higher per metre). Because it's an RGB+White strip it needs 5-core wiring and a compatible RGBW controller; a plain single-colour dimmer won't drive the colour channels. It is waterproof (IP66) and suitable for outdoor and wet areas; still use waterproof connectors and an appropriately rated driver for outdoor runs. Cut only at the marked cut points (every 6.25cm), and mount it in a suitable aluminium profile for the best heat dissipation and finish.
Rated IP66, this strip is protected against powerful water jets and heavy splashes, making it suitable for outdoor use, facades, garden and landscape features, and wet indoor areas such as bathrooms and kitchens. For a fully weatherproof result, pair it with waterproof connectors and an IP-rated (IP67) driver, and seal cut ends correctly.
Yes — it's rated IP66, so it's protected against heavy water jets and splashes, making it suitable for outdoor, garden and wet-area installations.
Each COB diode combines red, green and blue with a dedicated Warm White, so you get full RGB colour plus a real, usable 3000K white from a single strip.
It needs an RGBW controller and 5-core wiring (RGB + white), plus a standard 24V DC driver for power.
Every 6.25cm, at the marked cut points — trimming there won't damage the rest of the strip.
+353 24 904 96
