This Cold White COB LED strip delivers a crisp, dot-free 6000K light on a slim 10mm tape, and at 1950 lm/m it's the brightest white in the COB Spotless series. The spotless COB face gives one continuous line of light with no visible LED points, while the PRO build - double PCB layer with 3oz copper paths - keeps voltage drop and running temperature low over long runs.
|
Parameter |
Value |
|
SKU |
CSP-320-CW-477 |
|
Chip type |
COB (Spotless) |
|
Light type |
Cold White (single colour) |
|
Colour temperature |
6000K (Cold White) |
|
LEDs per metre |
320 |
|
Voltage |
24V DC |
|
Power per metre |
15W |
|
Luminous flux |
1950 lm/m |
|
CRI |
Ra90 |
|
Beam angle |
>160° |
|
Ingress protection |
IP20 (non-waterproof) |
|
Strip width |
10mm |
|
Copper trace thickness |
3oz |
|
PCB layers |
Double layer (PRO Version) |
|
Cut points |
Every 2.5cm (25mm) |
|
Lifespan |
50,000h |
|
Roll length |
30m (full roll) |
|
Warranty |
5 years |
Choose this 6000K Cold White version if you want the crispest, brightest daylight tone - ideal where clarity and high light output matter most. The same COB Spotless series is also available in 4000K Natural White, 3000K Warm White and 2700K Soft Warm; step down the colour temperature for a softer, cosier feel in living or hospitality spaces. This is the highest-output white in the range at 1950 lm/m, so pick it when brightness is the priority. It's an IP20 strip for dry indoor use only; for moisture-prone areas (bathroom, kitchen splash zones, outdoors), choose a waterproof IP-rated version.
This strip requires a dedicated 24V DC power supply and cannot be connected directly to mains - size the driver with roughly 20% spare headroom (the configurator suggests ~18W or higher per metre). A controller is only needed if you want dimming; for a fixed Cold White strip like this, a simple 24V driver is sufficient. Cut only at the marked cut points (every 2.5cm), and mount it in a suitable aluminium profile for the best heat dissipation and finish.
6000K is a crisp, bright cool-daylight white; 4000K is a more neutral, daylight-balanced tone. Choose 6000K for maximum clarity and brightness, 4000K for a softer everyday look.
Yes — at 1950 lm/m it has the highest output of the COB Spotless white strips.
Every 2.5cm (25mm), at the marked cut points — trimming there won't damage the rest of the strip.
No — it's rated IP20 with no protection against moisture. For wet or outdoor areas, choose a waterproof (IP-rated) version instead.
No. It runs from a standard 24V DC driver. You only need a controller if you want dimming.
| HUE Color | 6000K Cold White |
|---|---|
| Watts per meter | 15 |
| Water Resistance | IP20 Non Waterproof |
| Voltage | 24V |
| Lumens per meter | 1950 |
| Number of LEDs/ Meter | 320 |
This Cold White COB LED strip delivers a crisp, dot-free 6000K light on a slim 10mm tape, and at 1950 lm/m it's the brightest white in the COB Spotless series. The spotless COB face gives one continuous line of light with no visible LED points, while the PRO build - double PCB layer with 3oz copper paths - keeps voltage drop and running temperature low over long runs.
|
Parameter |
Value |
|
SKU |
CSP-320-CW-477 |
|
Chip type |
COB (Spotless) |
|
Light type |
Cold White (single colour) |
|
Colour temperature |
6000K (Cold White) |
|
LEDs per metre |
320 |
|
Voltage |
24V DC |
|
Power per metre |
15W |
|
Luminous flux |
1950 lm/m |
|
CRI |
Ra90 |
|
Beam angle |
>160° |
|
Ingress protection |
IP20 (non-waterproof) |
|
Strip width |
10mm |
|
Copper trace thickness |
3oz |
|
PCB layers |
Double layer (PRO Version) |
|
Cut points |
Every 2.5cm (25mm) |
|
Lifespan |
50,000h |
|
Roll length |
30m (full roll) |
|
Warranty |
5 years |
Choose this 6000K Cold White version if you want the crispest, brightest daylight tone - ideal where clarity and high light output matter most. The same COB Spotless series is also available in 4000K Natural White, 3000K Warm White and 2700K Soft Warm; step down the colour temperature for a softer, cosier feel in living or hospitality spaces. This is the highest-output white in the range at 1950 lm/m, so pick it when brightness is the priority. It's an IP20 strip for dry indoor use only; for moisture-prone areas (bathroom, kitchen splash zones, outdoors), choose a waterproof IP-rated version.
This strip requires a dedicated 24V DC power supply and cannot be connected directly to mains - size the driver with roughly 20% spare headroom (the configurator suggests ~18W or higher per metre). A controller is only needed if you want dimming; for a fixed Cold White strip like this, a simple 24V driver is sufficient. Cut only at the marked cut points (every 2.5cm), and mount it in a suitable aluminium profile for the best heat dissipation and finish.
6000K is a crisp, bright cool-daylight white; 4000K is a more neutral, daylight-balanced tone. Choose 6000K for maximum clarity and brightness, 4000K for a softer everyday look.
Yes — at 1950 lm/m it has the highest output of the COB Spotless white strips.
Every 2.5cm (25mm), at the marked cut points — trimming there won't damage the rest of the strip.
No — it's rated IP20 with no protection against moisture. For wet or outdoor areas, choose a waterproof (IP-rated) version instead.
No. It runs from a standard 24V DC driver. You only need a controller if you want dimming.
Loading...
+353 24 904 96
