This waterproof RGB colour-changing LED strip delivers vivid, full-spectrum colour at an ultra-high 950 lm/m, rated IP66 for outdoor and wet areas. With 120 SMD LEDs/m (each a 3-chip RGB diode) and a double PCB layer with 3oz copper paths, it's built for bright, dynamic colour effects that hold up to moisture - facades, gardens, bars and feature lighting.
|
Parameter |
Value |
|
SKU |
SPF-RGB-120-66-368 |
|
Chip type |
SMD (3-chip RGB) |
|
Light type |
RGB (colour changing) |
|
LEDs per metre |
120 |
|
Voltage |
24V DC |
|
Power per metre |
22W |
|
Luminous flux |
950 lm/m |
|
Ingress protection |
IP66 (waterproof) |
|
Strip width |
10.3mm |
|
Strip dimensions (IP66) |
10.3 × 2.7 mm |
|
Copper trace thickness |
3oz |
|
PCB layers |
Double layer (PRO Version) |
|
Wiring |
4-core (RGB) |
|
Adhesive |
3M 300 LSE |
|
Cut points |
Every 5cm |
|
Lifespan |
50,000h (L70) |
|
Roll length |
10m (full roll) |
Choose this waterproof IP66 RGB version if you want bright, dynamic colour in areas that face moisture - outdoor facades, garden features, bars or bathrooms. If your run is dry and indoors, an IP20 version is cheaper and slimmer. This is a pure RGB strip (no white channel); if you also need a usable white for everyday lighting, pick an RGB+W version, or an RGB+CCT strip for full colour plus tunable white. As an SMD strip with visible diodes it suits deeper profiles; for a seamless, dot-free look choose a COB version.
This strip runs on a dedicated 24V DC power supply and cannot be connected directly to mains - size the driver with roughly 20% spare headroom (the configurator suggests ~26W or higher per metre). It needs a compatible RGB controller to run colour effects; a plain single-colour dimmer won't work. It is waterproof (IP66) and suitable for outdoor and wet areas; still use waterproof connectors and an appropriately rated driver for outdoor runs. Cut only at the marked cut points (every 5cm), and mount it in a suitable aluminium profile for the best heat dissipation and finish.
Rated IP66, this strip is protected against powerful water jets and heavy splashes, making it suitable for outdoor use, facades, garden and landscape features, and wet indoor areas such as bathrooms and kitchens. For a fully weatherproof result, pair it with waterproof connectors and an IP-rated (IP67) driver, and seal cut ends correctly.
Yes — it's rated IP66, so it's protected against heavy water jets and splashes, making it suitable for outdoor, garden and wet-area installations.
No — it's a pure RGB strip. You can mix colours toward a white-ish tone, but for a proper white choose an RGB+W or RGB+CCT version instead.
It needs an RGB controller (4-core wiring), plus a standard 24V DC driver for power.
Every 5cm, at the marked cut points — trimming there won't damage the rest of the strip.
| Color Changing | RGB |
|---|---|
| Watts per meter | 22 |
| Water Resistance | IP66 Heat Shrink WP |
| Voltage | 24V |
| Lumens per meter | 950 |
| Number of LEDs/ Meter | 120 |
This waterproof RGB colour-changing LED strip delivers vivid, full-spectrum colour at an ultra-high 950 lm/m, rated IP66 for outdoor and wet areas. With 120 SMD LEDs/m (each a 3-chip RGB diode) and a double PCB layer with 3oz copper paths, it's built for bright, dynamic colour effects that hold up to moisture - facades, gardens, bars and feature lighting.
|
Parameter |
Value |
|
SKU |
SPF-RGB-120-66-368 |
|
Chip type |
SMD (3-chip RGB) |
|
Light type |
RGB (colour changing) |
|
LEDs per metre |
120 |
|
Voltage |
24V DC |
|
Power per metre |
22W |
|
Luminous flux |
950 lm/m |
|
Ingress protection |
IP66 (waterproof) |
|
Strip width |
10.3mm |
|
Strip dimensions (IP66) |
10.3 × 2.7 mm |
|
Copper trace thickness |
3oz |
|
PCB layers |
Double layer (PRO Version) |
|
Wiring |
4-core (RGB) |
|
Adhesive |
3M 300 LSE |
|
Cut points |
Every 5cm |
|
Lifespan |
50,000h (L70) |
|
Roll length |
10m (full roll) |
Choose this waterproof IP66 RGB version if you want bright, dynamic colour in areas that face moisture - outdoor facades, garden features, bars or bathrooms. If your run is dry and indoors, an IP20 version is cheaper and slimmer. This is a pure RGB strip (no white channel); if you also need a usable white for everyday lighting, pick an RGB+W version, or an RGB+CCT strip for full colour plus tunable white. As an SMD strip with visible diodes it suits deeper profiles; for a seamless, dot-free look choose a COB version.
This strip runs on a dedicated 24V DC power supply and cannot be connected directly to mains - size the driver with roughly 20% spare headroom (the configurator suggests ~26W or higher per metre). It needs a compatible RGB controller to run colour effects; a plain single-colour dimmer won't work. It is waterproof (IP66) and suitable for outdoor and wet areas; still use waterproof connectors and an appropriately rated driver for outdoor runs. Cut only at the marked cut points (every 5cm), and mount it in a suitable aluminium profile for the best heat dissipation and finish.
Rated IP66, this strip is protected against powerful water jets and heavy splashes, making it suitable for outdoor use, facades, garden and landscape features, and wet indoor areas such as bathrooms and kitchens. For a fully weatherproof result, pair it with waterproof connectors and an IP-rated (IP67) driver, and seal cut ends correctly.
Yes — it's rated IP66, so it's protected against heavy water jets and splashes, making it suitable for outdoor, garden and wet-area installations.
No — it's a pure RGB strip. You can mix colours toward a white-ish tone, but for a proper white choose an RGB+W or RGB+CCT version instead.
It needs an RGB controller (4-core wiring), plus a standard 24V DC driver for power.
Every 5cm, at the marked cut points — trimming there won't damage the rest of the strip.
Loading...
+353 24 904 96
