This Soft Warm White COB LED strip delivers a warm, amber-toned, dot-free 2700K light on a slim 10mm tape - the cosiest colour temperature in the COB Spotless series, while still reaching a high 1710 lm/m. The spotless COB face gives one continuous line of light with no visible LED points, while the PRO build - double PCB layer with 3oz copper paths - keeps voltage drop and running temperature low over long runs.
|
Parameter |
Value |
|
SKU |
CSP-320-HW-474 |
|
Chip type |
COB (Spotless) |
|
Light type |
Soft Warm White (single colour) |
|
Colour temperature |
2700K (Soft Warm White) |
|
LEDs per metre |
320 |
|
Voltage |
24V DC |
|
Power per metre |
15W |
|
Luminous flux |
1710 lm/m |
|
CRI |
Ra90 |
|
Beam angle |
>160° |
|
Ingress protection |
IP20 (non-waterproof) |
|
Strip width |
10mm |
|
Strip dimensions (IP20) |
8.0 × 1.6 mm |
|
Copper trace thickness |
3oz |
|
PCB layers |
Double layer (PRO Version) |
|
Cut points |
Every 2.5cm (25mm) |
|
Lifespan |
50,000h |
|
Roll length |
30m (full roll) |
|
Warranty |
5 years |
Choose this 2700K Soft Warm White version if you want the warmest, cosiest, most candle-like glow in the range - perfect for bedrooms, lounges, restaurants and intimate hospitality spaces. The same COB Spotless series also comes in 3000K Warm White (slightly cleaner), 4000K Natural White (neutral) and 6000K Cold White (crisp and brightest); step up the colour temperature for a more functional, everyday light. At 1710 lm/m it stays bright despite being the warmest option. It's an IP20 strip for dry indoor use only; for moisture-prone areas (bathroom, kitchen splash zones, outdoors), choose the waterproof IP66 version of the same series.
This strip requires a dedicated 24V DC power supply and cannot be connected directly to mains - size the driver with roughly 20% spare headroom (the configurator suggests ~18W or higher per metre). A controller is only needed if you want dimming; for a fixed Soft Warm White strip like this, a simple 24V driver is sufficient. Cut only at the marked cut points (every 2.5cm), and mount it in a suitable aluminium profile for the best heat dissipation and finish.
Both are warm, but 2700K (Soft Warm) is the warmest and most amber for a candle-like glow; 3000K is slightly cleaner while still cosy. Choose by the mood you want — everything else about the strip stays the same.
It can be — 2700K suits relaxed, intimate spaces. For task areas like kitchens and offices, a neutral 4000K or crisp 6000K is usually the better pick.
Every 2.5cm (25mm), at the marked cut points — trimming there won't damage the rest of the strip.
No — it's rated IP20 with no protection against moisture. For wet or outdoor areas, choose the IP66 version of the same series instead.
No. It runs from a standard 24V DC driver. You only need a controller if you want dimming.
| HUE Color | 2700K Soft Warm White |
|---|---|
| Watts per meter | 15 |
| Water Resistance | IP20 Non Waterproof |
| Voltage | 24V |
| Lumens per meter | 1710 |
| Number of LEDs/ Meter | 320 |
This Soft Warm White COB LED strip delivers a warm, amber-toned, dot-free 2700K light on a slim 10mm tape - the cosiest colour temperature in the COB Spotless series, while still reaching a high 1710 lm/m. The spotless COB face gives one continuous line of light with no visible LED points, while the PRO build - double PCB layer with 3oz copper paths - keeps voltage drop and running temperature low over long runs.
|
Parameter |
Value |
|
SKU |
CSP-320-HW-474 |
|
Chip type |
COB (Spotless) |
|
Light type |
Soft Warm White (single colour) |
|
Colour temperature |
2700K (Soft Warm White) |
|
LEDs per metre |
320 |
|
Voltage |
24V DC |
|
Power per metre |
15W |
|
Luminous flux |
1710 lm/m |
|
CRI |
Ra90 |
|
Beam angle |
>160° |
|
Ingress protection |
IP20 (non-waterproof) |
|
Strip width |
10mm |
|
Strip dimensions (IP20) |
8.0 × 1.6 mm |
|
Copper trace thickness |
3oz |
|
PCB layers |
Double layer (PRO Version) |
|
Cut points |
Every 2.5cm (25mm) |
|
Lifespan |
50,000h |
|
Roll length |
30m (full roll) |
|
Warranty |
5 years |
Choose this 2700K Soft Warm White version if you want the warmest, cosiest, most candle-like glow in the range - perfect for bedrooms, lounges, restaurants and intimate hospitality spaces. The same COB Spotless series also comes in 3000K Warm White (slightly cleaner), 4000K Natural White (neutral) and 6000K Cold White (crisp and brightest); step up the colour temperature for a more functional, everyday light. At 1710 lm/m it stays bright despite being the warmest option. It's an IP20 strip for dry indoor use only; for moisture-prone areas (bathroom, kitchen splash zones, outdoors), choose the waterproof IP66 version of the same series.
This strip requires a dedicated 24V DC power supply and cannot be connected directly to mains - size the driver with roughly 20% spare headroom (the configurator suggests ~18W or higher per metre). A controller is only needed if you want dimming; for a fixed Soft Warm White strip like this, a simple 24V driver is sufficient. Cut only at the marked cut points (every 2.5cm), and mount it in a suitable aluminium profile for the best heat dissipation and finish.
Both are warm, but 2700K (Soft Warm) is the warmest and most amber for a candle-like glow; 3000K is slightly cleaner while still cosy. Choose by the mood you want — everything else about the strip stays the same.
It can be — 2700K suits relaxed, intimate spaces. For task areas like kitchens and offices, a neutral 4000K or crisp 6000K is usually the better pick.
Every 2.5cm (25mm), at the marked cut points — trimming there won't damage the rest of the strip.
No — it's rated IP20 with no protection against moisture. For wet or outdoor areas, choose the IP66 version of the same series instead.
No. It runs from a standard 24V DC driver. You only need a controller if you want dimming.
Loading...
+353 24 904 96
