This Soft Warm White LED strip gives a warm, amber 2700K glow on a slim 8mm tape, delivering 1450 lm/m from just 12 W thanks to seven LEDs per module and up to 140 lm/W efficiency. The double PCB layer with 3oz copper paths keeps voltage drop and running temperature low, making it a popular, efficient choice for architectural profiles and cosy indoor lighting.
|
Parameter |
Value |
|
SKU |
SPE-112-HW-466 |
|
Chip type |
SMD (7 LEDs per module) |
|
Light type |
Soft Warm White (single colour) |
|
Colour temperature |
2700K (Soft Warm White) |
|
LEDs per metre |
112 |
|
Voltage |
24V DC |
|
Power per metre |
12W |
|
Luminous flux |
1450 lm/m |
|
Luminous efficacy |
up to 140 lm/W |
|
CRI |
Ra90 |
|
Ingress protection |
IP20 (non-waterproof) |
|
Strip width |
8mm |
|
Copper trace thickness |
3oz |
|
PCB layers |
Double layer (PRO Version) |
|
Adhesive |
3M 300 LSE |
|
Cut points |
Every 6.25cm |
|
Lifespan |
75,000h |
|
Roll length |
30m (full roll) |
Choose this 2700K Soft Warm version if you want a warm, cosy, candle-like glow for lounges, bedrooms, restaurants and hospitality spaces. If you want it even warmer, pick the 2200K Ultra Soft Warm; for cleaner, more functional light step up to 3000K Warm White, 4000K Natural White or 6000K Cold White. At 8mm wide with 112 SMD LEDs/m, this is a slim, efficient strip; for higher brightness or an outdoor-rated build, check the 168 LED/m or the waterproof IP66/68 versions. This is an IP20 strip for dry indoor use only; for moisture-prone areas (bathroom, kitchen splash zones, outdoors), choose a waterproof IP-rated version.
This strip requires a dedicated 24V DC power supply and cannot be connected directly to mains - size the driver with roughly 20% spare headroom (the configurator suggests ~14W or higher per metre). A controller is only needed if you want dimming; for a fixed Soft Warm strip like this, a simple 24V driver is sufficient. Cut only at the marked cut points (every 6.25cm), and mount it in a suitable aluminium profile for the best heat dissipation and finish.
Both are warm, but 2200K (Ultra Soft Warm) is the warmest and most amber for a candle-like glow; 2700K is slightly cleaner while still cosy. Choose by the mood you want.
Every 6.25cm, at the marked cut points — trimming there won't damage the rest of the strip.
Each module packs seven LEDs, giving up to 140 lm/W — so you get 1450 lm/m from just 12 W.
No — it's rated IP20 with no protection against moisture. For wet or outdoor areas, choose a waterproof (IP-rated) version instead.
No. It runs from a standard 24V DC driver. You only need a controller if you want dimming.
| HUE Color | 2700K Soft Warm White |
|---|---|
| Watts per meter | 12 |
| Voltage | 24V |
| Lumens per meter | 1450 |
| Number of LEDs/ Meter | 112 |
From €13.62 €11.07
To €27.00 €21.95
From €19.26 €15.66
To €32.31 €26.27
From €57.70 €46.91
To €101.59 €82.59
From €28.34 €23.04
To €44.75 €36.38
From €68.65 €55.81
To €171.95 €139.80
From €146.17 €118.84
To €204.89 €166.58
This Soft Warm White LED strip gives a warm, amber 2700K glow on a slim 8mm tape, delivering 1450 lm/m from just 12 W thanks to seven LEDs per module and up to 140 lm/W efficiency. The double PCB layer with 3oz copper paths keeps voltage drop and running temperature low, making it a popular, efficient choice for architectural profiles and cosy indoor lighting.
|
Parameter |
Value |
|
SKU |
SPE-112-HW-466 |
|
Chip type |
SMD (7 LEDs per module) |
|
Light type |
Soft Warm White (single colour) |
|
Colour temperature |
2700K (Soft Warm White) |
|
LEDs per metre |
112 |
|
Voltage |
24V DC |
|
Power per metre |
12W |
|
Luminous flux |
1450 lm/m |
|
Luminous efficacy |
up to 140 lm/W |
|
CRI |
Ra90 |
|
Ingress protection |
IP20 (non-waterproof) |
|
Strip width |
8mm |
|
Copper trace thickness |
3oz |
|
PCB layers |
Double layer (PRO Version) |
|
Adhesive |
3M 300 LSE |
|
Cut points |
Every 6.25cm |
|
Lifespan |
75,000h |
|
Roll length |
30m (full roll) |
Choose this 2700K Soft Warm version if you want a warm, cosy, candle-like glow for lounges, bedrooms, restaurants and hospitality spaces. If you want it even warmer, pick the 2200K Ultra Soft Warm; for cleaner, more functional light step up to 3000K Warm White, 4000K Natural White or 6000K Cold White. At 8mm wide with 112 SMD LEDs/m, this is a slim, efficient strip; for higher brightness or an outdoor-rated build, check the 168 LED/m or the waterproof IP66/68 versions. This is an IP20 strip for dry indoor use only; for moisture-prone areas (bathroom, kitchen splash zones, outdoors), choose a waterproof IP-rated version.
This strip requires a dedicated 24V DC power supply and cannot be connected directly to mains - size the driver with roughly 20% spare headroom (the configurator suggests ~14W or higher per metre). A controller is only needed if you want dimming; for a fixed Soft Warm strip like this, a simple 24V driver is sufficient. Cut only at the marked cut points (every 6.25cm), and mount it in a suitable aluminium profile for the best heat dissipation and finish.
Both are warm, but 2200K (Ultra Soft Warm) is the warmest and most amber for a candle-like glow; 2700K is slightly cleaner while still cosy. Choose by the mood you want.
Every 6.25cm, at the marked cut points — trimming there won't damage the rest of the strip.
Each module packs seven LEDs, giving up to 140 lm/W — so you get 1450 lm/m from just 12 W.
No — it's rated IP20 with no protection against moisture. For wet or outdoor areas, choose a waterproof (IP-rated) version instead.
No. It runs from a standard 24V DC driver. You only need a controller if you want dimming.
+353 24 904 96
