This Ultra Soft Warm White LED strip gives an ultra-warm, amber 2200K glow on a slim 8mm tape, delivering 1300 lm/m from just 12 W thanks to seven LEDs per module and up to 140 lm/W efficiency. The double PCB layer with 3oz copper paths keeps voltage drop and running temperature low, making it a popular, efficient choice for architectural profiles and cosy indoor lighting.
|
Parameter |
Value |
|
SKU |
SPE-112-HW-467 |
|
Chip type |
SMD (7 LEDs per module) |
|
Light type |
Ultra Soft Warm White (single colour) |
|
Colour temperature |
2200K (Ultra Soft Warm) |
|
LEDs per metre |
112 |
|
Voltage |
24V DC |
|
Power per metre |
12W |
|
Luminous flux |
1300 lm/m |
|
Luminous efficacy |
up to 140 lm/W |
|
CRI |
Ra90 |
|
Ingress protection |
IP20 (non-waterproof) |
|
Strip width |
8mm |
|
Copper trace thickness |
3oz |
|
PCB layers |
Double layer (PRO Version) |
|
Adhesive |
3M 300 LSE |
|
Cut points |
Every 6.25cm |
|
Lifespan |
75,000h |
|
Roll length |
30m (full roll) |
Choose this 2200K Ultra Soft Warm version if you want the warmest, most amber, candle-like glow - ideal for lounges, bedrooms, restaurants and intimate hospitality spaces. The same SPE series is also available in 3000K Warm White, 4000K Natural White and 6000K Cold White for progressively cleaner, cooler light. At 8mm wide with 112 SMD LEDs/m, this is a slim, efficient strip; for higher brightness or an outdoor-rated build, check the 168 LED/m or the waterproof IP66/68 versions. This is an IP20 strip for dry indoor use only; for moisture-prone areas (bathroom, kitchen splash zones, outdoors), choose a waterproof IP-rated version.
This strip requires a dedicated 24V DC power supply and cannot be connected directly to mains - size the driver with roughly 20% spare headroom (the configurator suggests ~14W or higher per metre). A controller is only needed if you want dimming; for a fixed Ultra Soft Warm strip like this, a simple 24V driver is sufficient. Cut only at the marked cut points (every 6.25cm), and mount it in a suitable aluminium profile for the best heat dissipation and finish.
It's an ultra-warm, amber, candle-like white — warmer than 2700K or 3000K — ideal for cosy, atmospheric spaces.
Every 6.25cm, at the marked cut points — trimming there won't damage the rest of the strip.
Each module packs seven LEDs, giving up to 140 lm/W — so you get 1300 lm/m from just 12 W.
No — it's rated IP20 with no protection against moisture. For wet or outdoor areas, choose a waterproof (IP-rated) version instead.
No. It runs from a standard 24V DC driver. You only need a controller if you want dimming.
| HUE Color | 2200K Ultra Soft Warm |
|---|---|
| Watts per meter | 12 |
| Voltage | 24V |
| Lumens per meter | 1300 |
| Number of LEDs/ Meter | 112 |
From €13.62 €11.07
To €27.00 €21.95
From €19.26 €15.66
To €32.31 €26.27
From €57.70 €46.91
To €101.59 €82.59
From €28.34 €23.04
To €44.75 €36.38
From €68.65 €55.81
To €171.95 €139.80
From €146.17 €118.84
To €204.89 €166.58
This Ultra Soft Warm White LED strip gives an ultra-warm, amber 2200K glow on a slim 8mm tape, delivering 1300 lm/m from just 12 W thanks to seven LEDs per module and up to 140 lm/W efficiency. The double PCB layer with 3oz copper paths keeps voltage drop and running temperature low, making it a popular, efficient choice for architectural profiles and cosy indoor lighting.
|
Parameter |
Value |
|
SKU |
SPE-112-HW-467 |
|
Chip type |
SMD (7 LEDs per module) |
|
Light type |
Ultra Soft Warm White (single colour) |
|
Colour temperature |
2200K (Ultra Soft Warm) |
|
LEDs per metre |
112 |
|
Voltage |
24V DC |
|
Power per metre |
12W |
|
Luminous flux |
1300 lm/m |
|
Luminous efficacy |
up to 140 lm/W |
|
CRI |
Ra90 |
|
Ingress protection |
IP20 (non-waterproof) |
|
Strip width |
8mm |
|
Copper trace thickness |
3oz |
|
PCB layers |
Double layer (PRO Version) |
|
Adhesive |
3M 300 LSE |
|
Cut points |
Every 6.25cm |
|
Lifespan |
75,000h |
|
Roll length |
30m (full roll) |
Choose this 2200K Ultra Soft Warm version if you want the warmest, most amber, candle-like glow - ideal for lounges, bedrooms, restaurants and intimate hospitality spaces. The same SPE series is also available in 3000K Warm White, 4000K Natural White and 6000K Cold White for progressively cleaner, cooler light. At 8mm wide with 112 SMD LEDs/m, this is a slim, efficient strip; for higher brightness or an outdoor-rated build, check the 168 LED/m or the waterproof IP66/68 versions. This is an IP20 strip for dry indoor use only; for moisture-prone areas (bathroom, kitchen splash zones, outdoors), choose a waterproof IP-rated version.
This strip requires a dedicated 24V DC power supply and cannot be connected directly to mains - size the driver with roughly 20% spare headroom (the configurator suggests ~14W or higher per metre). A controller is only needed if you want dimming; for a fixed Ultra Soft Warm strip like this, a simple 24V driver is sufficient. Cut only at the marked cut points (every 6.25cm), and mount it in a suitable aluminium profile for the best heat dissipation and finish.
It's an ultra-warm, amber, candle-like white — warmer than 2700K or 3000K — ideal for cosy, atmospheric spaces.
Every 6.25cm, at the marked cut points — trimming there won't damage the rest of the strip.
Each module packs seven LEDs, giving up to 140 lm/W — so you get 1300 lm/m from just 12 W.
No — it's rated IP20 with no protection against moisture. For wet or outdoor areas, choose a waterproof (IP-rated) version instead.
No. It runs from a standard 24V DC driver. You only need a controller if you want dimming.
+353 24 904 96
