This Ultra Soft Warm White LED strip gives an ultra-warm, amber 2200K glow on a slim 8mm tape, running on 12V with 900 lm/m output. The double PCB layer with 3oz copper paths keeps voltage drop and running temperature low, and with LM-80 tested LEDs it holds its colour and brightness over time - ideal for cosy, atmospheric indoor lighting on shorter runs.
|
Parameter |
Value |
|
SKU |
SCA-120-UHW-354 |
|
Chip type |
SMD |
|
Light type |
Ultra Soft Warm White (single colour) |
|
Colour temperature |
2200K (Ultra Soft Warm) |
|
LEDs per metre |
120 |
|
Voltage |
12V DC |
|
Power per metre |
9.6W |
|
Luminous flux |
900 lm/m |
|
Ingress protection |
IP20 (non-waterproof) |
|
Strip width |
8mm |
|
Strip dimensions (IP20) |
8.0 × 1.4 mm |
|
Copper trace thickness |
3oz |
|
PCB layers |
Double layer (PRO Version) |
|
Adhesive |
3M 300 LSE |
|
Cut points |
Every 2.5cm (25mm) |
|
Lifespan |
75,000h |
|
Roll length |
30m (full roll) |
Choose this 2200K Ultra Soft Warm version if you want the warmest, most amber, candle-like glow for cosy, intimate spaces - bedrooms, lounges, bars and restaurants. The same SCA series is also available in a wide range of temperatures - 2700K Soft Warm, 3000K Warm, 4000K Daylight, 6000K Cold, 8000K Ultra Cold and 11000K Super Cold - plus Red, Blue and Amber; step up for cleaner or cooler light. This is a 12V strip, best for shorter runs; for long runs with less voltage drop, choose a 24V version. It's IP20 for dry indoor use only; for moisture-prone areas, choose a waterproof IP-rated version.
This strip requires a dedicated 12V DC power supply and cannot be connected directly to mains - size the driver with roughly 20% spare headroom (the configurator suggests ~12W or higher per metre). Because it's 12V, keep runs shorter to avoid voltage drop; for long continuous lengths choose a 24V version. A controller is only needed if you want dimming. Cut only at the marked cut points (every 2.5cm), and mount it in a suitable aluminium profile for the best heat dissipation and finish.
It's an ultra-warm, amber, candle-like white — warmer than 2700K — ideal for cosy, atmospheric spaces.
This is a 12V strip, best suited to shorter runs. For longer continuous lengths with less voltage drop, choose a 24V version.
Every 2.5cm (25mm), at the marked cut points — trimming there won't damage the rest of the strip.
No — it's rated IP20 with no protection against moisture. For wet or outdoor areas, choose a waterproof (IP-rated) version instead.
No. It runs from a standard 12V DC driver. You only need a controller if you want dimming.
| HUE Color | 2200K Ultra Soft Warm |
|---|---|
| Watts per meter | 9.6 |
| Water Resistance | IP20 Non Waterproof |
| Voltage | 12V |
| Lumens per meter | 900 |
| Number of LEDs/ Meter | 120 |
From €16.74 €13.61
To €33.15 €26.95
From €18.25 €14.84
To €20.10 €16.34
From €27.06 €22.00
To €65.79 €53.49
From €13.62 €11.07
To €27.00 €21.95
From €17.75 €14.43
To €32.31 €26.27
From €18.04 €14.67
To €34.45 €28.01
This Ultra Soft Warm White LED strip gives an ultra-warm, amber 2200K glow on a slim 8mm tape, running on 12V with 900 lm/m output. The double PCB layer with 3oz copper paths keeps voltage drop and running temperature low, and with LM-80 tested LEDs it holds its colour and brightness over time - ideal for cosy, atmospheric indoor lighting on shorter runs.
|
Parameter |
Value |
|
SKU |
SCA-120-UHW-354 |
|
Chip type |
SMD |
|
Light type |
Ultra Soft Warm White (single colour) |
|
Colour temperature |
2200K (Ultra Soft Warm) |
|
LEDs per metre |
120 |
|
Voltage |
12V DC |
|
Power per metre |
9.6W |
|
Luminous flux |
900 lm/m |
|
Ingress protection |
IP20 (non-waterproof) |
|
Strip width |
8mm |
|
Strip dimensions (IP20) |
8.0 × 1.4 mm |
|
Copper trace thickness |
3oz |
|
PCB layers |
Double layer (PRO Version) |
|
Adhesive |
3M 300 LSE |
|
Cut points |
Every 2.5cm (25mm) |
|
Lifespan |
75,000h |
|
Roll length |
30m (full roll) |
Choose this 2200K Ultra Soft Warm version if you want the warmest, most amber, candle-like glow for cosy, intimate spaces - bedrooms, lounges, bars and restaurants. The same SCA series is also available in a wide range of temperatures - 2700K Soft Warm, 3000K Warm, 4000K Daylight, 6000K Cold, 8000K Ultra Cold and 11000K Super Cold - plus Red, Blue and Amber; step up for cleaner or cooler light. This is a 12V strip, best for shorter runs; for long runs with less voltage drop, choose a 24V version. It's IP20 for dry indoor use only; for moisture-prone areas, choose a waterproof IP-rated version.
This strip requires a dedicated 12V DC power supply and cannot be connected directly to mains - size the driver with roughly 20% spare headroom (the configurator suggests ~12W or higher per metre). Because it's 12V, keep runs shorter to avoid voltage drop; for long continuous lengths choose a 24V version. A controller is only needed if you want dimming. Cut only at the marked cut points (every 2.5cm), and mount it in a suitable aluminium profile for the best heat dissipation and finish.
It's an ultra-warm, amber, candle-like white — warmer than 2700K — ideal for cosy, atmospheric spaces.
This is a 12V strip, best suited to shorter runs. For longer continuous lengths with less voltage drop, choose a 24V version.
Every 2.5cm (25mm), at the marked cut points — trimming there won't damage the rest of the strip.
No — it's rated IP20 with no protection against moisture. For wet or outdoor areas, choose a waterproof (IP-rated) version instead.
No. It runs from a standard 12V DC driver. You only need a controller if you want dimming.
+353 24 904 96
