This Warm White COB LED strip delivers a cosy, dot-free 3000K light on a slim 10mm tape, combining high brightness (1890 lm/m) with a warm, homely tone that suits relaxed living spaces. The spotless COB face gives one continuous line of light with no visible LED points, while the PRO build - double PCB layer with 3oz copper paths - keeps voltage drop and running temperature low over long runs.
|
Parameter |
Value |
|
SKU |
CSP-320-WW-475 |
|
Chip type |
COB (Spotless) |
|
Light type |
Warm White (single colour) |
|
Colour temperature |
3000K (Warm White) |
|
LEDs per metre |
320 |
|
Voltage |
24V DC |
|
Power per metre |
15W |
|
Luminous flux |
1890 lm/m |
|
CRI |
Ra90 |
|
Beam angle |
>160° |
|
Ingress protection |
IP20 (non-waterproof) |
|
Strip width |
10mm |
|
Copper trace thickness |
3oz |
|
PCB layers |
Double layer (PRO Version) |
|
Cut points |
Every 2.5cm (25mm) |
|
Lifespan |
50,000h |
|
Roll length |
30m (full roll) |
|
Warranty |
5 years |
Choose this 3000K Warm White version if you want a warm, cosy tone for relaxed, homely spaces - bedrooms, living rooms, hospitality and dining areas. The same COB Spotless series is also available in 2700K Soft Warm (even warmer), 4000K Natural White (neutral) and 6000K Cold White (crisp and brightest); step warmer for a softer glow or cooler for a cleaner, more functional light. At 1890 lm/m it stays bright despite the warm tone. It's an IP20 strip for dry indoor use only; for moisture-prone areas (bathroom, kitchen splash zones, outdoors), choose a waterproof IP-rated version.
This strip requires a dedicated 24V DC power supply and cannot be connected directly to mains - size the driver with roughly 20% spare headroom (the configurator suggests ~18W or higher per metre). A controller is only needed if you want dimming; for a fixed Warm White strip like this, a simple 24V driver is sufficient. Cut only at the marked cut points (every 2.5cm), and mount it in a suitable aluminium profile for the best heat dissipation and finish.
3000K is a warm, cosy white that suits homely, relaxed spaces; 4000K is a neutral, daylight-balanced white that looks cleaner and more functional. Everything else about the strip stays the same.
Both are warm, but 2700K (Soft Warm) is warmer and more amber; 3000K is slightly cleaner while still cosy. Choose by the mood you want.
Every 2.5cm (25mm), at the marked cut points — trimming there won't damage the rest of the strip.
No — it's rated IP20 with no protection against moisture. For wet or outdoor areas, choose a waterproof (IP-rated) version instead.
No. It runs from a standard 24V DC driver. You only need a controller if you want dimming.
| HUE Color | 3000K Warm White |
|---|---|
| Watts per meter | 15 |
| Water Resistance | IP20 Non Waterproof |
| Voltage | 24V |
| Lumens per meter | 1890 |
| Number of LEDs/ Meter | 320 |
This Warm White COB LED strip delivers a cosy, dot-free 3000K light on a slim 10mm tape, combining high brightness (1890 lm/m) with a warm, homely tone that suits relaxed living spaces. The spotless COB face gives one continuous line of light with no visible LED points, while the PRO build - double PCB layer with 3oz copper paths - keeps voltage drop and running temperature low over long runs.
|
Parameter |
Value |
|
SKU |
CSP-320-WW-475 |
|
Chip type |
COB (Spotless) |
|
Light type |
Warm White (single colour) |
|
Colour temperature |
3000K (Warm White) |
|
LEDs per metre |
320 |
|
Voltage |
24V DC |
|
Power per metre |
15W |
|
Luminous flux |
1890 lm/m |
|
CRI |
Ra90 |
|
Beam angle |
>160° |
|
Ingress protection |
IP20 (non-waterproof) |
|
Strip width |
10mm |
|
Copper trace thickness |
3oz |
|
PCB layers |
Double layer (PRO Version) |
|
Cut points |
Every 2.5cm (25mm) |
|
Lifespan |
50,000h |
|
Roll length |
30m (full roll) |
|
Warranty |
5 years |
Choose this 3000K Warm White version if you want a warm, cosy tone for relaxed, homely spaces - bedrooms, living rooms, hospitality and dining areas. The same COB Spotless series is also available in 2700K Soft Warm (even warmer), 4000K Natural White (neutral) and 6000K Cold White (crisp and brightest); step warmer for a softer glow or cooler for a cleaner, more functional light. At 1890 lm/m it stays bright despite the warm tone. It's an IP20 strip for dry indoor use only; for moisture-prone areas (bathroom, kitchen splash zones, outdoors), choose a waterproof IP-rated version.
This strip requires a dedicated 24V DC power supply and cannot be connected directly to mains - size the driver with roughly 20% spare headroom (the configurator suggests ~18W or higher per metre). A controller is only needed if you want dimming; for a fixed Warm White strip like this, a simple 24V driver is sufficient. Cut only at the marked cut points (every 2.5cm), and mount it in a suitable aluminium profile for the best heat dissipation and finish.
3000K is a warm, cosy white that suits homely, relaxed spaces; 4000K is a neutral, daylight-balanced white that looks cleaner and more functional. Everything else about the strip stays the same.
Both are warm, but 2700K (Soft Warm) is warmer and more amber; 3000K is slightly cleaner while still cosy. Choose by the mood you want.
Every 2.5cm (25mm), at the marked cut points — trimming there won't damage the rest of the strip.
No — it's rated IP20 with no protection against moisture. For wet or outdoor areas, choose a waterproof (IP-rated) version instead.
No. It runs from a standard 24V DC driver. You only need a controller if you want dimming.
Loading...
+353 24 904 96
