eco-infrared-heating-mats-under-laminate-floors-40w-m-230v-width-50cm

Eco infrared heating mats 40w/m, 230V, under laminate floors (panels). Ideal for hallway, office,  kitchen, commercial room, hotels, restaurant etc..

INFRARED HEATING FILM (mats) UNDER THE FLOATING FLOOR

This method of underfloor heating directly under a laminate floor allows fast heating of the whole habitable surface and energy-saving maintaining preset temperature as well as quick and easy regulation.

Practical Solution
Underfloor heating is installed directly under a laminate floor. Since the heating foil in comparison to other heating systems is placed directly under the covering layer (floating floor), the operation is more economical. Due to the fact that the heating mats must not overheat thick layer of concrete, the efficiency is approaching 99%. Heat is transferred directly from the heating film to the floor surface. In this way is heating foil overheating whole area in short time and provide pleasantly warm floor. Simple assembly method and the materials used allow the installation of the entire heating system in a very short time.
Heating film and energy saving
Solution when heating film is installed directly below the floating floor is characterized by low losses as generated thermal energy is directly transferred to the surface of the floor. The heating system is fully automated by means of thermostats, which helps to control the maximum temperature of the floor and the temperature in the heated space. Regulation prevents unnecessary overheating of the room and loss of energy. Thanks to the programmable thermostat the system can lower the temperature at a time when no one is at home and adjust to more comfortable temperatures during the evening, after returning from work.

Thermal Comfort
HeatDecor infrared heating mats is technologically advanced product that meets all the requirements for simple functionality and practicality. With an ultra thin carbon heating film can be in your home, apartment or office eqipped by modern and environmentally friendly way of heating. Control is almost instantaneous and the entire system is fully automated so there is no need to worry about anything. HeatDecor film operates on the basis of the infrared radiation that positively stimulates the function of the human body. In addition, there is no undesired circulation of hot air and dust, which is particularly appreciated by allergy sufferers. Infra red heat is warming up directly all objects, walls, which has a positive effect and works and antifungal. Infra red heating film utilizes air as transport medium so there is no unnecessary losses in the heating process.

The heating mat and operating costs
Monthly bill for this type of heating depends much on the overall thermal insulation of buildings, the materials used, the windows, and so on. In older buildings, or worse insulated places can increase costs.
To minimize costs, it is possible to combine floor heating with ceramic infra panels. The film is placed under the floor just on walking paths so you can feel comfortably warm floors and for walls can be used Infra BOARD or ceramic Infra PANELS Heat Decor.

Advantages of underfloor heating with infrared heating film HeatDecor
*rapid warm up effect, low energy losses
*quick and easy regulation of the temperature at various times
*uniform distribution of heat in the heated space
*selective heating for specific areas
*easy installation under the floating floor
*the possibility of installing underfloor heating under any floating floor
*low installation costs compared to other system
*maintenance-free and trouble-free

ECO-ELECTRICAL-HEATING-MATS- HEAT DECOR HD 3025G - 35W/m

- 50 CM WIDTH
- POWER 40W / mb, 80W / m2
- MAX TEMP. ~ 32 * C
- 230 V POWER SUPPLY

1- COPPER TAPE - acts as an electric conductor. We connect electrical wires supplying the heating foil to connectors using copper connectors.

2 - SILVER TAPE - fulfills the function of electrical connection of a copper strip with graphite paste.

3 - PET FOILS - these are components that connect all elements of a heating foil in a lamination process into one whole. PET films perform the protective function of the heating device against mechanical damage, penetration of water vapor and gases.

4 - GRAPHITE PASTE - is the basic heating material for the film. Occurs as a mixture of fine-grained particles whose main components are graphite and carbon. The proportion of graphite paste mixture is regulated by the heat power of Heat Decor foil.

5 - FILM CUTTING PLACE - is the area of the heating foil in which we can cut the heating foil to the desired size. This area is replicated every 12.5 cm.