+353 24 904 96
LED Strip RGB CCT • 800lm • 24V • 16W • RGB+CCT • 12.3mm • IP66 • PRO Version 2oz copper paths •
In stock
SKU
COB-840-RGBCCT-445
LED Strip COB RGB+CCT 2700K-6500K IP66 Waterproof
This waterproof COB RGB+CCT LED strip is a true 5-in-1 tape: full-colour RGB plus a fully tunable white from warm 2700K to cool 6500K, all in one spotless 12.3mm strip rated IP66 for outdoor and wet areas. With 840 LEDs/m it delivers a continuous, dot-free line of light, while the double PCB layer with 2oz copper paths keeps voltage drop and running temperature low.
Key Features
- Waterproof IP66: protected against heavy splashes and rain for outdoor and wet-area use
- 5-in-1 RGB+CCT: full colour plus tunable white (2700K-6500K) in a single diode
- COB Spotless design: continuous, dot-free line of light with no visible LED points
- 840 LEDs/m: very high density for smooth colour blending and even white
- 800 lm/m at 16 W/m on 24V: strong output with low voltage drop over long runs
- 3-chip LEDs (RGB) plus tunable white: rich colour and full white-temperature control
- 2oz copper paths + Double PCB Layer (PRO Version): lower voltage drop and cooler operation than single-layer strips
- 3M 300 LSE adhesive base: strong, reliable mounting
Technical Specification
|
Parameter |
Value |
|
SKU |
COB-840-RGBCCT-445 |
|
Chip type |
COB (Spotless) |
|
Colour |
RGB+CCT (5-in-1) |
|
Colour temperature (white range) |
2700K - 6500K |
|
LEDs per metre |
840 |
|
Voltage |
24V DC |
|
Power per metre |
16W |
|
Luminous flux |
800 lm/m |
|
Ingress protection |
IP66 (waterproof) |
|
Strip width |
12.3mm |
|
Strip dimensions (IP66) |
10.3 × 2.0 mm |
|
Copper trace thickness |
2oz |
|
PCB layers |
Double layer (PRO Version) |
|
Wiring |
6-core (RGB + CCT) |
|
Adhesive |
3M 300 LSE |
|
Cut points |
Every 4.16cm |
|
Lifespan |
50,000h |
|
Roll length |
10m (full roll) |
Which Version Should You Choose?
Choose this waterproof IP66 RGB+CCT version if you want the most flexible strip available - full colour plus fully tunable white from warm to cool - in areas that face moisture, like outdoor facades, garden features or bathrooms. If you only need colour plus a single fixed white, an RGB+W strip (RGB with one warm, natural or cold white) is simpler and needs only 5-core wiring rather than 6. For dry indoor runs, choose the IP20 version instead. This 5-in-1 tape gives the widest lighting control from a single strip.
Applications
- Outdoor colour and tunable-white lighting for facades and garden features
- Bathroom and wet-room feature lighting (splash-exposed areas)
- Cove and architectural lighting where full colour plus white control is wanted
- Signage and creative installations in damp or outdoor spaces
Installation
This strip runs on a dedicated 24V DC power supply and cannot be connected directly to mains - size the driver with roughly 20% spare headroom (the configurator suggests ~19W or higher per metre). As a 5-in-1 RGB+CCT strip it needs 6-core wiring and a compatible RGB+CCT controller; simpler RGB or RGBW controllers won't drive all channels. It is waterproof (IP66) and suitable for outdoor and wet areas; still use waterproof connectors and an appropriately rated driver for outdoor runs. Cut only at the marked cut points (every 4.16cm), and mount it in a suitable aluminium profile for the best heat dissipation and finish.
Waterproof
Rated IP66, this strip is protected against powerful water jets and heavy splashes, making it suitable for outdoor use, facades, garden and landscape features, and wet indoor areas such as bathrooms and kitchens. For a fully weatherproof result, pair it with waterproof connectors and an IP-rated (IP67) driver, and seal cut ends correctly.
FAQ
What does "5-in-1 RGB+CCT" mean?
Each diode combines red, green and blue with a tunable white (warm to cool), so a single strip gives you full colour effects plus complete control of white colour temperature from 2700K to 6500K.
What controller and wiring does it need?
It needs a dedicated RGB+CCT controller and 6-core wiring, plus a standard 24V DC driver for power. RGB or RGBW controllers won't drive all five channels.
Can this strip be used outdoors?
Yes — it's rated IP66, so it's protected against heavy water jets and splashes, making it suitable for outdoor, garden and wet-area installations.
How often can this strip be cut?
Every 4.16cm, at the marked cut points — trimming there won't damage the rest of the strip.
More Information
| Color Changing | RGBCCT |
|---|---|
| Watts per meter | 16 |
| Water Resistance | IP66 Heat Shrink WP |
| Voltage | 24V |
| Lumens per meter | 800 |
| Number of LEDs/ Meter | 840 |
Reviews
Write Your Own Review
Related Products
We found other products you might like!
-
LED Profile • SURFACE • "X" • BLACK • Aluminium • 2.02 Meters length • PRO • multi set •From €14.76 €12.00
To €28.14 €22.88
-
LED Profile • RECESSED • "B" • WHITE • Aluminium • 2.02 Meters length • PRO • multiset •From €19.26 €15.66
To €32.31 €26.27
-
LED Profile • SPECIAL APP • FURNITURE • "Q18" • WHITE • Aluminium • 2.02 Meters length • PRO • multi set •From €41.91 €34.07
To €57.58 €46.81
-
LED Profile • RECESSED • ARCHITECTURAL • "inSILEDA" • WHITE • Aluminium • 2.02 Meters length • PRO • multi set •From €42.35 €34.43
To €59.85 €48.66
-
LED Profile • RECESSED • ARCHITECTURAL • PLASTER IN • "TIANO" • WHITE • Aluminium • 2.02 Meters length • PRO • multi set •From €75.83 €61.65
To €96.31 €78.30
-
LED Profile • GLASS • FURNITURE • "I10" • SILVER • Aluminium • 2.02 Meters length • PRO • multi set •From €48.63 €39.54
To €133.46 €108.50
LED Strip COB RGB+CCT 2700K-6500K IP66 Waterproof
This waterproof COB RGB+CCT LED strip is a true 5-in-1 tape: full-colour RGB plus a fully tunable white from warm 2700K to cool 6500K, all in one spotless 12.3mm strip rated IP66 for outdoor and wet areas. With 840 LEDs/m it delivers a continuous, dot-free line of light, while the double PCB layer with 2oz copper paths keeps voltage drop and running temperature low.
Key Features
- Waterproof IP66: protected against heavy splashes and rain for outdoor and wet-area use
- 5-in-1 RGB+CCT: full colour plus tunable white (2700K-6500K) in a single diode
- COB Spotless design: continuous, dot-free line of light with no visible LED points
- 840 LEDs/m: very high density for smooth colour blending and even white
- 800 lm/m at 16 W/m on 24V: strong output with low voltage drop over long runs
- 3-chip LEDs (RGB) plus tunable white: rich colour and full white-temperature control
- 2oz copper paths + Double PCB Layer (PRO Version): lower voltage drop and cooler operation than single-layer strips
- 3M 300 LSE adhesive base: strong, reliable mounting
Technical Specification
|
Parameter |
Value |
|
SKU |
COB-840-RGBCCT-445 |
|
Chip type |
COB (Spotless) |
|
Colour |
RGB+CCT (5-in-1) |
|
Colour temperature (white range) |
2700K - 6500K |
|
LEDs per metre |
840 |
|
Voltage |
24V DC |
|
Power per metre |
16W |
|
Luminous flux |
800 lm/m |
|
Ingress protection |
IP66 (waterproof) |
|
Strip width |
12.3mm |
|
Strip dimensions (IP66) |
10.3 × 2.0 mm |
|
Copper trace thickness |
2oz |
|
PCB layers |
Double layer (PRO Version) |
|
Wiring |
6-core (RGB + CCT) |
|
Adhesive |
3M 300 LSE |
|
Cut points |
Every 4.16cm |
|
Lifespan |
50,000h |
|
Roll length |
10m (full roll) |
Which Version Should You Choose?
Choose this waterproof IP66 RGB+CCT version if you want the most flexible strip available - full colour plus fully tunable white from warm to cool - in areas that face moisture, like outdoor facades, garden features or bathrooms. If you only need colour plus a single fixed white, an RGB+W strip (RGB with one warm, natural or cold white) is simpler and needs only 5-core wiring rather than 6. For dry indoor runs, choose the IP20 version instead. This 5-in-1 tape gives the widest lighting control from a single strip.
Applications
- Outdoor colour and tunable-white lighting for facades and garden features
- Bathroom and wet-room feature lighting (splash-exposed areas)
- Cove and architectural lighting where full colour plus white control is wanted
- Signage and creative installations in damp or outdoor spaces
Installation
This strip runs on a dedicated 24V DC power supply and cannot be connected directly to mains - size the driver with roughly 20% spare headroom (the configurator suggests ~19W or higher per metre). As a 5-in-1 RGB+CCT strip it needs 6-core wiring and a compatible RGB+CCT controller; simpler RGB or RGBW controllers won't drive all channels. It is waterproof (IP66) and suitable for outdoor and wet areas; still use waterproof connectors and an appropriately rated driver for outdoor runs. Cut only at the marked cut points (every 4.16cm), and mount it in a suitable aluminium profile for the best heat dissipation and finish.
Waterproof
Rated IP66, this strip is protected against powerful water jets and heavy splashes, making it suitable for outdoor use, facades, garden and landscape features, and wet indoor areas such as bathrooms and kitchens. For a fully weatherproof result, pair it with waterproof connectors and an IP-rated (IP67) driver, and seal cut ends correctly.
FAQ
What does "5-in-1 RGB+CCT" mean?
Each diode combines red, green and blue with a tunable white (warm to cool), so a single strip gives you full colour effects plus complete control of white colour temperature from 2700K to 6500K.
What controller and wiring does it need?
It needs a dedicated RGB+CCT controller and 6-core wiring, plus a standard 24V DC driver for power. RGB or RGBW controllers won't drive all five channels.
Can this strip be used outdoors?
Yes — it's rated IP66, so it's protected against heavy water jets and splashes, making it suitable for outdoor, garden and wet-area installations.
How often can this strip be cut?
Every 4.16cm, at the marked cut points — trimming there won't damage the rest of the strip.
Write Your Own Review
