+353 24 904 96
LED Strip RGB CCT • 800lm • 24V • 16W • RGB+CCT • 12mm • IP20 • PRO Version 2oz copper paths •
In stock
SKU
COB-840-RGBCCT-444
LED Strip COB RGB+CCT 2700K-6500K
This COB RGB+CCT LED strip is a true 5-in-1 tape: full-colour RGB plus a fully tunable white from warm 2700K to cool 6500K, all in one spotless 12mm strip. With 840 LEDs/m it delivers a continuous, dot-free line of light, while the double PCB layer with 2oz copper paths keeps voltage drop and running temperature low - the most flexible lighting control from a single strip.
Key Features
- 5-in-1 RGB+CCT: full colour plus tunable white (2700K-6500K) in a single diode
- COB Spotless design: continuous, dot-free line of light with no visible LED points
- 840 LEDs/m: very high density for smooth colour blending and even white
- 800 lm/m at 16 W/m on 24V: strong output with low voltage drop over long runs
- 3-chip LEDs (RGB) plus tunable white: rich colour and full white-temperature control
- 2oz copper paths + Double PCB Layer (PRO Version): lower voltage drop and cooler operation than single-layer strips
- 3M 300 LSE adhesive base: strong, reliable mounting
Technical Specification
|
Parameter |
Value |
|
SKU |
COB-840-RGBCCT-444 |
|
Chip type |
COB (Spotless) |
|
Colour |
RGB+CCT (5-in-1) |
|
Colour temperature (white range) |
2700K - 6500K |
|
LEDs per metre |
840 |
|
Voltage |
24V DC |
|
Power per metre |
16W |
|
Luminous flux |
800 lm/m |
|
Ingress protection |
IP20 (non-waterproof) |
|
Strip width |
12mm |
|
Strip dimensions (IP20) |
10.0 × 1.6 mm |
|
Copper trace thickness |
2oz |
|
PCB layers |
Double layer (PRO Version) |
|
Wiring |
6-core (RGB + CCT) |
|
Adhesive |
3M 300 LSE |
|
Cut points |
Every 4.16cm |
|
Lifespan |
50,000h |
|
Roll length |
30m (full roll) |
Which Version Should You Choose?
Choose this RGB+CCT version if you want the most flexible strip available - full colour plus fully tunable white from warm to cool - all from one tape. If you only need colour plus a single fixed white, an RGB+W strip (RGB with one warm, natural or cold white) is simpler and needs only 5-core wiring rather than 6. This is an IP20 strip for dry indoor use only; if the run will face moisture (bathroom, kitchen splash zones, outdoors), choose the IP66 waterproof version of the same series.
Applications
- Feature and architectural lighting where full colour plus white control is wanted
- Cove and ceiling lighting for colour scenes and tunable white
- Shelves, niches, furniture units, steps and cabinets in dry indoor areas
- Signage and creative installations needing full 5-in-1 control
Installation
This strip runs on a dedicated 24V DC power supply and cannot be connected directly to mains - size the driver with roughly 20% spare headroom (the configurator suggests ~19W or higher per metre). As a 5-in-1 RGB+CCT strip it needs 6-core wiring and a compatible RGB+CCT controller; simpler RGB or RGBW controllers won't drive all channels. Cut only at the marked cut points (every 4.16cm), and mount it in a suitable aluminium profile for the best heat dissipation and finish.
FAQ
What does "5-in-1 RGB+CCT" mean?
Each diode combines red, green and blue with a tunable white (warm to cool), so a single strip gives you full colour effects plus complete control of white colour temperature from 2700K to 6500K.
What controller and wiring does it need?
It needs a dedicated RGB+CCT controller and 6-core wiring, plus a standard 24V DC driver for power. RGB or RGBW controllers won't drive all five channels.
How often can this strip be cut?
Every 4.16cm, at the marked cut points — trimming there won't damage the rest of the strip.
Can I use this strip in a bathroom or outdoors?
No — it's rated IP20 with no protection against moisture. For wet or outdoor areas, choose the IP66 version of the same series instead.
More Information
| Color Changing | RGBCCT |
|---|---|
| Watts per meter | 16 |
| Water Resistance | IP20 Non Waterproof |
| Voltage | 24V |
| Lumens per meter | 800 |
| Number of LEDs/ Meter | 840 |
Reviews
Write Your Own Review
Related Products
We found other products you might like!
-
LED Profile • SURFACE • "X" • BLACK • Aluminium • 2.02 Meters length • PRO • multi set •From €14.76 €12.00
To €28.14 €22.88
-
LED Profile • RECESSED • "B" • WHITE • Aluminium • 2.02 Meters length • PRO • multiset •From €19.26 €15.66
To €32.31 €26.27
-
LED Profile • SPECIAL APP • FURNITURE • "Q18" • WHITE • Aluminium • 2.02 Meters length • PRO • multi set •From €41.91 €34.07
To €57.58 €46.81
-
LED Profile • RECESSED • ARCHITECTURAL • "inSILEDA" • WHITE • Aluminium • 2.02 Meters length • PRO • multi set •From €42.35 €34.43
To €59.85 €48.66
-
LED Profile • RECESSED • ARCHITECTURAL • PLASTER IN • "TIANO" • WHITE • Aluminium • 2.02 Meters length • PRO • multi set •From €75.83 €61.65
To €96.31 €78.30
-
LED Profile • GLASS • FURNITURE • "I10" • SILVER • Aluminium • 2.02 Meters length • PRO • multi set •From €48.63 €39.54
To €133.46 €108.50
LED Strip COB RGB+CCT 2700K-6500K
This COB RGB+CCT LED strip is a true 5-in-1 tape: full-colour RGB plus a fully tunable white from warm 2700K to cool 6500K, all in one spotless 12mm strip. With 840 LEDs/m it delivers a continuous, dot-free line of light, while the double PCB layer with 2oz copper paths keeps voltage drop and running temperature low - the most flexible lighting control from a single strip.
Key Features
- 5-in-1 RGB+CCT: full colour plus tunable white (2700K-6500K) in a single diode
- COB Spotless design: continuous, dot-free line of light with no visible LED points
- 840 LEDs/m: very high density for smooth colour blending and even white
- 800 lm/m at 16 W/m on 24V: strong output with low voltage drop over long runs
- 3-chip LEDs (RGB) plus tunable white: rich colour and full white-temperature control
- 2oz copper paths + Double PCB Layer (PRO Version): lower voltage drop and cooler operation than single-layer strips
- 3M 300 LSE adhesive base: strong, reliable mounting
Technical Specification
|
Parameter |
Value |
|
SKU |
COB-840-RGBCCT-444 |
|
Chip type |
COB (Spotless) |
|
Colour |
RGB+CCT (5-in-1) |
|
Colour temperature (white range) |
2700K - 6500K |
|
LEDs per metre |
840 |
|
Voltage |
24V DC |
|
Power per metre |
16W |
|
Luminous flux |
800 lm/m |
|
Ingress protection |
IP20 (non-waterproof) |
|
Strip width |
12mm |
|
Strip dimensions (IP20) |
10.0 × 1.6 mm |
|
Copper trace thickness |
2oz |
|
PCB layers |
Double layer (PRO Version) |
|
Wiring |
6-core (RGB + CCT) |
|
Adhesive |
3M 300 LSE |
|
Cut points |
Every 4.16cm |
|
Lifespan |
50,000h |
|
Roll length |
30m (full roll) |
Which Version Should You Choose?
Choose this RGB+CCT version if you want the most flexible strip available - full colour plus fully tunable white from warm to cool - all from one tape. If you only need colour plus a single fixed white, an RGB+W strip (RGB with one warm, natural or cold white) is simpler and needs only 5-core wiring rather than 6. This is an IP20 strip for dry indoor use only; if the run will face moisture (bathroom, kitchen splash zones, outdoors), choose the IP66 waterproof version of the same series.
Applications
- Feature and architectural lighting where full colour plus white control is wanted
- Cove and ceiling lighting for colour scenes and tunable white
- Shelves, niches, furniture units, steps and cabinets in dry indoor areas
- Signage and creative installations needing full 5-in-1 control
Installation
This strip runs on a dedicated 24V DC power supply and cannot be connected directly to mains - size the driver with roughly 20% spare headroom (the configurator suggests ~19W or higher per metre). As a 5-in-1 RGB+CCT strip it needs 6-core wiring and a compatible RGB+CCT controller; simpler RGB or RGBW controllers won't drive all channels. Cut only at the marked cut points (every 4.16cm), and mount it in a suitable aluminium profile for the best heat dissipation and finish.
FAQ
What does "5-in-1 RGB+CCT" mean?
Each diode combines red, green and blue with a tunable white (warm to cool), so a single strip gives you full colour effects plus complete control of white colour temperature from 2700K to 6500K.
What controller and wiring does it need?
It needs a dedicated RGB+CCT controller and 6-core wiring, plus a standard 24V DC driver for power. RGB or RGBW controllers won't drive all five channels.
How often can this strip be cut?
Every 4.16cm, at the marked cut points — trimming there won't damage the rest of the strip.
Can I use this strip in a bathroom or outdoors?
No — it's rated IP20 with no protection against moisture. For wet or outdoor areas, choose the IP66 version of the same series instead.
Write Your Own Review
