This waterproof Soft Warm White LED strip brings a warm, cosy 2700K glow to outdoor and wet areas, running on 12V and rated IP66. At 960 lm/m from 9.6 W with LM-80 tested LEDs, it holds its colour and brightness over time, and the double PCB layer with 3oz copper paths keeps voltage drop and running temperature low - ideal for warm, atmospheric lighting on shorter wet-area runs.
|
Parameter |
Value |
|
SKU |
WP-SCA-120-HW-375 |
|
Chip type |
SMD |
|
Light type |
Soft Warm White (single colour) |
|
Colour temperature |
2700K (Soft Warm White) |
|
LEDs per metre |
120 |
|
Voltage |
12V DC |
|
Power per metre |
9.6W |
|
Luminous flux |
960 lm/m |
|
Ingress protection |
IP66 (waterproof) |
|
Strip width |
8mm |
|
Strip dimensions (IP66) |
8.3 × 1.7 mm |
|
Copper trace thickness |
3oz |
|
PCB layers |
Double layer (PRO Version) |
|
Adhesive |
3M 300 LSE |
|
Cut points |
Every 2.5cm (25mm) |
|
Lifespan |
75,000h |
|
Roll length |
10m (full roll) |
Choose this waterproof IP66 Soft Warm version if you want a warm, cosy 2700K tone in areas that face moisture - outdoor facades, garden features, bathrooms or kitchen splash zones. The same SCA series is also available in 3000K Warm, 4000K Daylight and 6000K Cold; step up the colour temperature for cleaner, more functional light. This is a 12V strip, best for shorter runs; for long runs with less voltage drop, choose a 24V version. If your installation is dry and indoors, an IP20 version is cheaper.
This strip requires a dedicated 12V DC power supply and cannot be connected directly to mains - size the driver with roughly 20% spare headroom (the configurator suggests ~12W or higher per metre). Because it's 12V, keep runs shorter to avoid voltage drop; for long continuous lengths choose a 24V version. It is waterproof (IP66) and suitable for outdoor and wet areas; still use waterproof connectors and an appropriately rated driver for outdoor runs. Cut only at the marked cut points (every 2.5cm), and mount it in a suitable aluminium profile for the best heat dissipation and finish.
Rated IP66, this strip is protected against powerful water jets and heavy splashes, making it suitable for outdoor use, facades, garden and landscape features, and wet indoor areas such as bathrooms and kitchens. For a fully weatherproof result, pair it with waterproof connectors and an IP-rated (IP67) driver, and seal cut ends correctly.
Yes — it's rated IP66, so it's protected against heavy water jets and splashes, making it suitable for outdoor, garden and wet-area installations.
This is a 12V strip, best suited to shorter runs. For longer continuous lengths with less voltage drop, choose a 24V version.
Every 2.5cm (25mm), at the marked cut points — trimming there won't damage the rest of the strip.
It runs from a standard 12V DC driver. For outdoor use, choose a waterproof/IP-rated driver and waterproof connectors.
| HUE Color | 2700K Soft Warm White |
|---|---|
| Watts per meter | 9.6 |
| Water Resistance | IP66 Heat Shrink WP |
| Voltage | 12V |
| Lumens per meter | 960 |
| Number of LEDs/ Meter | 120 |
From €12.83 €10.43
To €26.21 €21.31
From €17.75 €14.43
To €32.31 €26.27
From €19.26 €15.66
To €32.31 €26.27
From €23.05 €18.74
To €24.90 €20.24
From €38.11 €30.98
To €53.78 €43.72
This waterproof Soft Warm White LED strip brings a warm, cosy 2700K glow to outdoor and wet areas, running on 12V and rated IP66. At 960 lm/m from 9.6 W with LM-80 tested LEDs, it holds its colour and brightness over time, and the double PCB layer with 3oz copper paths keeps voltage drop and running temperature low - ideal for warm, atmospheric lighting on shorter wet-area runs.
|
Parameter |
Value |
|
SKU |
WP-SCA-120-HW-375 |
|
Chip type |
SMD |
|
Light type |
Soft Warm White (single colour) |
|
Colour temperature |
2700K (Soft Warm White) |
|
LEDs per metre |
120 |
|
Voltage |
12V DC |
|
Power per metre |
9.6W |
|
Luminous flux |
960 lm/m |
|
Ingress protection |
IP66 (waterproof) |
|
Strip width |
8mm |
|
Strip dimensions (IP66) |
8.3 × 1.7 mm |
|
Copper trace thickness |
3oz |
|
PCB layers |
Double layer (PRO Version) |
|
Adhesive |
3M 300 LSE |
|
Cut points |
Every 2.5cm (25mm) |
|
Lifespan |
75,000h |
|
Roll length |
10m (full roll) |
Choose this waterproof IP66 Soft Warm version if you want a warm, cosy 2700K tone in areas that face moisture - outdoor facades, garden features, bathrooms or kitchen splash zones. The same SCA series is also available in 3000K Warm, 4000K Daylight and 6000K Cold; step up the colour temperature for cleaner, more functional light. This is a 12V strip, best for shorter runs; for long runs with less voltage drop, choose a 24V version. If your installation is dry and indoors, an IP20 version is cheaper.
This strip requires a dedicated 12V DC power supply and cannot be connected directly to mains - size the driver with roughly 20% spare headroom (the configurator suggests ~12W or higher per metre). Because it's 12V, keep runs shorter to avoid voltage drop; for long continuous lengths choose a 24V version. It is waterproof (IP66) and suitable for outdoor and wet areas; still use waterproof connectors and an appropriately rated driver for outdoor runs. Cut only at the marked cut points (every 2.5cm), and mount it in a suitable aluminium profile for the best heat dissipation and finish.
Rated IP66, this strip is protected against powerful water jets and heavy splashes, making it suitable for outdoor use, facades, garden and landscape features, and wet indoor areas such as bathrooms and kitchens. For a fully weatherproof result, pair it with waterproof connectors and an IP-rated (IP67) driver, and seal cut ends correctly.
Yes — it's rated IP66, so it's protected against heavy water jets and splashes, making it suitable for outdoor, garden and wet-area installations.
This is a 12V strip, best suited to shorter runs. For longer continuous lengths with less voltage drop, choose a 24V version.
Every 2.5cm (25mm), at the marked cut points — trimming there won't damage the rest of the strip.
It runs from a standard 12V DC driver. For outdoor use, choose a waterproof/IP-rated driver and waterproof connectors.