This waterproof Cold White SPE-112 LED strip brings a crisp 6000K daylight tone to outdoor and wet areas, rated IP66 with a continuous, dot-free line of light. At a bright 1600 lm/m from 12 W thanks to seven LEDs per module and up to 140 lm/W efficiency, it's built for architectural profiles and demanding outdoor jobs, with a double PCB layer and 3oz copper paths for stable, cool-running performance.
|
Parameter |
Value |
|
SKU |
WP-SPE-112-CW-381 |
|
Chip type |
SMD (7 LEDs per module) |
|
Light type |
Cold White (single colour) |
|
Colour temperature |
6000K (Cold White) |
|
LEDs per metre |
112 |
|
Voltage |
24V DC |
|
Power per metre |
12W |
|
Luminous flux |
1600 lm/m |
|
Luminous efficacy |
up to 140 lm/W |
|
Ingress protection |
IP66 (waterproof) |
|
Strip width |
8.3mm |
|
Strip dimensions (IP66) |
8.3 × 1.7 mm |
|
Copper trace thickness |
3oz |
|
PCB layers |
Double layer (PRO Version) |
|
Adhesive |
3M 300 LSE |
|
Cut points |
Every 6.25cm |
|
Lifespan |
75,000h |
|
Roll length |
10m (full roll) |
Choose this waterproof IP66 Cold White version if you want a crisp, bright 6000K daylight tone in areas that face moisture - outdoor facades, garden features, bathrooms or kitchen splash zones. The same SPE-112 series is also available in 3000K Warm White and 4000K Natural White; step down the colour temperature for a softer, cosier feel. If your installation is dry and indoors, an IP20 version is cheaper. With 1600 lm/m from 12 W it's a bright, efficient choice for architectural and main-area lighting.
This strip requires a dedicated 24V DC power supply and cannot be connected directly to mains - size the driver with roughly 20% spare headroom (the configurator suggests ~14W or higher per metre). A controller is only needed if you want dimming; for a fixed Cold White strip like this, a simple 24V driver is sufficient. It is waterproof (IP66) and suitable for outdoor and wet areas; still use waterproof connectors and an appropriately rated driver for outdoor runs. Cut only at the marked cut points (every 6.25cm), and mount it in a suitable aluminium profile for the best heat dissipation and finish.
Rated IP66, this strip is protected against powerful water jets and heavy splashes, making it suitable for outdoor use, facades, garden and landscape features, and wet indoor areas such as bathrooms and kitchens. For a fully weatherproof result, pair it with waterproof connectors and an IP-rated (IP67) driver, and seal cut ends correctly.
Yes — it's rated IP66, so it's protected against heavy water jets and splashes, making it suitable for outdoor, garden and wet-area installations.
Each module packs seven LEDs, giving up to 140 lm/W — so you get 1600 lm/m from just 12 W.
Every 6.25cm, at the marked cut points — trimming there won't damage the rest of the strip.
It runs from a standard 24V DC driver. For outdoor use, choose a waterproof/IP-rated driver and waterproof connectors.
| HUE Color | 6000K Cold White |
|---|---|
| Watts per meter | 12 |
| Water Resistance | IP66 Heat Shrink WP |
| Voltage | 24V |
| Lumens per meter | 1600 |
| Number of LEDs/ Meter | 120 |
From €34.27 €27.86
To €48.83 €39.70
From €21.98 €17.87
To €38.39 €31.21
From €75.69 €61.54
To €109.31 €88.87
From €32.94 €26.78
To €59.06 €48.02
From €132.47 €107.70
To €204.30 €166.10
From €17.74 €14.42
To €36.04 €29.30
This waterproof Cold White SPE-112 LED strip brings a crisp 6000K daylight tone to outdoor and wet areas, rated IP66 with a continuous, dot-free line of light. At a bright 1600 lm/m from 12 W thanks to seven LEDs per module and up to 140 lm/W efficiency, it's built for architectural profiles and demanding outdoor jobs, with a double PCB layer and 3oz copper paths for stable, cool-running performance.
|
Parameter |
Value |
|
SKU |
WP-SPE-112-CW-381 |
|
Chip type |
SMD (7 LEDs per module) |
|
Light type |
Cold White (single colour) |
|
Colour temperature |
6000K (Cold White) |
|
LEDs per metre |
112 |
|
Voltage |
24V DC |
|
Power per metre |
12W |
|
Luminous flux |
1600 lm/m |
|
Luminous efficacy |
up to 140 lm/W |
|
Ingress protection |
IP66 (waterproof) |
|
Strip width |
8.3mm |
|
Strip dimensions (IP66) |
8.3 × 1.7 mm |
|
Copper trace thickness |
3oz |
|
PCB layers |
Double layer (PRO Version) |
|
Adhesive |
3M 300 LSE |
|
Cut points |
Every 6.25cm |
|
Lifespan |
75,000h |
|
Roll length |
10m (full roll) |
Choose this waterproof IP66 Cold White version if you want a crisp, bright 6000K daylight tone in areas that face moisture - outdoor facades, garden features, bathrooms or kitchen splash zones. The same SPE-112 series is also available in 3000K Warm White and 4000K Natural White; step down the colour temperature for a softer, cosier feel. If your installation is dry and indoors, an IP20 version is cheaper. With 1600 lm/m from 12 W it's a bright, efficient choice for architectural and main-area lighting.
This strip requires a dedicated 24V DC power supply and cannot be connected directly to mains - size the driver with roughly 20% spare headroom (the configurator suggests ~14W or higher per metre). A controller is only needed if you want dimming; for a fixed Cold White strip like this, a simple 24V driver is sufficient. It is waterproof (IP66) and suitable for outdoor and wet areas; still use waterproof connectors and an appropriately rated driver for outdoor runs. Cut only at the marked cut points (every 6.25cm), and mount it in a suitable aluminium profile for the best heat dissipation and finish.
Rated IP66, this strip is protected against powerful water jets and heavy splashes, making it suitable for outdoor use, facades, garden and landscape features, and wet indoor areas such as bathrooms and kitchens. For a fully weatherproof result, pair it with waterproof connectors and an IP-rated (IP67) driver, and seal cut ends correctly.
Yes — it's rated IP66, so it's protected against heavy water jets and splashes, making it suitable for outdoor, garden and wet-area installations.
Each module packs seven LEDs, giving up to 140 lm/W — so you get 1600 lm/m from just 12 W.
Every 6.25cm, at the marked cut points — trimming there won't damage the rest of the strip.
It runs from a standard 24V DC driver. For outdoor use, choose a waterproof/IP-rated driver and waterproof connectors.
+353 24 904 96
