This LED Strip Cold White Ultra High Bright is an ultra-slim 5mm SMD strip delivering a crisp 6000K cold white at very high output, built for professional fixtures where both brightness and a narrow profile matter. Its differentiator against wider strips in this range is the 5mm PCB: it fits sectioned fittings and profiles where you want to run multiple lines side by side (for example warm and cold together to build a tunable CCT system in a single channel), while still pushing 2400 lm/m. Seven LEDs per module give it a genuine ~140 lm/W efficacy, and the diodes meet LM-80 testing for low lumen decay and stable colour over time.
|
Parameter |
Value |
|
SKU |
SCS-168-CW-347 |
|
Chip type |
SMD |
|
LEDs per metre |
168 |
|
Voltage |
24V |
|
Power per metre |
17W |
|
Colour temperature |
6000K (Cold White) |
|
Luminous flux |
2400 lm/m |
|
Luminous efficacy |
~140 lm/W |
|
Ingress protection |
IP20 (non-waterproof) |
|
Strip width |
5mm |
|
Strip thickness (IP20) |
1.4mm |
|
LED spacing |
5.95mm |
|
PCB layers |
Double layer |
|
Copper trace thickness |
3oz |
|
Cut points |
every 62.5mm |
|
Reel length |
30m |
|
Lifespan |
75,000h |
Choose this 5mm Cold White version when you need a slim strip that fits tight profiles or lets you run two lines in one fitting - for example pairing it with a warm white line to build a tunable CCT channel. If you don't need the narrow profile, a wider strip in the same output class is easier to handle. On colour temperature: 6000K is a crisp, energising cold white best for task, retail and technical spaces; for a neutral daylight tone choose the 4000K Natural White version, or the 3000K Warm White for a cosier feel. This is an IP20 strip for dry indoor use only - if the install will face moisture, choose a waterproof IP66 strip instead.
This strip requires a dedicated 24V DC power supply and cannot be connected directly to mains voltage. A controller is only needed if you want dimming; for a fixed cold white strip a simple 24V driver is enough. For a 1m length, plan for a supply of 20W or higher (strip wattage plus roughly 20% headroom) and size the driver up for longer runs. The strip can be trimmed every 62.5mm at the marked cut points, and mounts via its 3M adhesive back or inside an aluminium profile, which is recommended for heat dissipation on high-output runs.
The 5mm width fits narrow profiles and lets you run two lines side by side in one fitting — handy for building a warm + cold CCT system or for slim signage channels.
6000K is a crisp cold white for task and technical spaces; 4000K is a neutral daylight tone; 3000K is a warmer, cosier white. Same strip, different colour temperature.
No. IP20 has no protection against moisture or splashes. For those areas choose a waterproof IP66 strip instead.
Every 62.5mm, at the marked cut points — trimming there won't damage the rest of the strip.
| HUE Color | 6000K Cold White |
|---|---|
| Watts per meter | 17 |
| Water Resistance | IP20 Non Waterproof |
| Voltage | 24V |
| Lumens per meter | 2400 |
| Number of LEDs/ Meter | 168 |
From €17.75 €14.43
To €32.31 €26.27
From €19.26 €15.66
To €32.31 €26.27
From €20.91 €17.00
To €35.47 €28.84
From €34.44 €28.00
To €60.57 €49.24
From €34.44 €28.00
To €60.57 €49.24
This LED Strip Cold White Ultra High Bright is an ultra-slim 5mm SMD strip delivering a crisp 6000K cold white at very high output, built for professional fixtures where both brightness and a narrow profile matter. Its differentiator against wider strips in this range is the 5mm PCB: it fits sectioned fittings and profiles where you want to run multiple lines side by side (for example warm and cold together to build a tunable CCT system in a single channel), while still pushing 2400 lm/m. Seven LEDs per module give it a genuine ~140 lm/W efficacy, and the diodes meet LM-80 testing for low lumen decay and stable colour over time.
|
Parameter |
Value |
|
SKU |
SCS-168-CW-347 |
|
Chip type |
SMD |
|
LEDs per metre |
168 |
|
Voltage |
24V |
|
Power per metre |
17W |
|
Colour temperature |
6000K (Cold White) |
|
Luminous flux |
2400 lm/m |
|
Luminous efficacy |
~140 lm/W |
|
Ingress protection |
IP20 (non-waterproof) |
|
Strip width |
5mm |
|
Strip thickness (IP20) |
1.4mm |
|
LED spacing |
5.95mm |
|
PCB layers |
Double layer |
|
Copper trace thickness |
3oz |
|
Cut points |
every 62.5mm |
|
Reel length |
30m |
|
Lifespan |
75,000h |
Choose this 5mm Cold White version when you need a slim strip that fits tight profiles or lets you run two lines in one fitting - for example pairing it with a warm white line to build a tunable CCT channel. If you don't need the narrow profile, a wider strip in the same output class is easier to handle. On colour temperature: 6000K is a crisp, energising cold white best for task, retail and technical spaces; for a neutral daylight tone choose the 4000K Natural White version, or the 3000K Warm White for a cosier feel. This is an IP20 strip for dry indoor use only - if the install will face moisture, choose a waterproof IP66 strip instead.
This strip requires a dedicated 24V DC power supply and cannot be connected directly to mains voltage. A controller is only needed if you want dimming; for a fixed cold white strip a simple 24V driver is enough. For a 1m length, plan for a supply of 20W or higher (strip wattage plus roughly 20% headroom) and size the driver up for longer runs. The strip can be trimmed every 62.5mm at the marked cut points, and mounts via its 3M adhesive back or inside an aluminium profile, which is recommended for heat dissipation on high-output runs.
The 5mm width fits narrow profiles and lets you run two lines side by side in one fitting — handy for building a warm + cold CCT system or for slim signage channels.
6000K is a crisp cold white for task and technical spaces; 4000K is a neutral daylight tone; 3000K is a warmer, cosier white. Same strip, different colour temperature.
No. IP20 has no protection against moisture or splashes. For those areas choose a waterproof IP66 strip instead.
Every 62.5mm, at the marked cut points — trimming there won't damage the rest of the strip.
+353 24 904 96
