50W Outdoor LED Floodlight - PIR sensor - P44 - 4000lm - Natural White

50W Outdoor LED Floodlight, PIR motion sensor, IP44, 4000K - ANTEM -

suitable for : Commercial offices, Hotels, Restaurants, Pubs, Garden, Patio, Garage...etc

ANTEM is a series of LED floodlights. These floodlights are above all easy to connect, and thanks to the integrated junction box you can also avoid unaesthetic cable connections. ANTEM LED series provides a wide range of power options, from 10W to 100W, as well as versions with and without motion sensors. A milky lampshade with a delicate prism softly disperses light and reduces the glare effect. The version without a motion sensor has a tightness of IP65, while the one with a sensor has a tightness of IP44. The sensor can be adjusted in terms of light duration, light intensity and detection range.

TYPE OF LIGHT SOURCE:

Lighting technology used: LED
Non-directional or directional light source: DLS
Mains or non-mains light source: MLS
Connected light source (CLS): no
Colour-tuneable light source: no
High luminance light source: no
Anti-glare shield: no
Dimmable: no

PRODUCT PARAMETERS:

Colour: black
Place of assembly: wall mounted, ceiling mounted, surface mounted
Place of application: Indoors and outdoors
Minimum distance from the illuminated object: 1m
Compatible with a dimmer: no
Motion detection: yes
Replaceable light source: no
Sensitivity regulation: yes
Mercury content: no
Integrated LED light source: yes
Rated voltage [V]: 220-240 AC
Rated frequency [Hz]: 50
Maximum power [W]: 50
Class of protection against electric shock: I
Diode type: LED SMD
Luminous flux [lm]: 4000
Colour temperature: white
Service life [h]: 15000
Number of on/off cycles: ≥10000
Lighting angle [°]: 100
Ambient temperature range to which the product can be exposed: -20÷35
Enclosure material: aluminum alloy
Protective glass material: Tempered glass
Extension-arm material: Metal
Sensor type: PIR
Connection type: Bolt terminal block
Range of sections of wires used [mm²]: 1-1,5
Sensor-operation time [second-minute]: 10-10
Lamp-heating time [s]: ≤1
Lamp-ignition time [s]: ≤0,5
sensor working angle [°]: 120
Illumination-level setpoint by which the sensor detects movement [lx]: 2-2000
The fixture is movable vertically [°]: 180
IP class: 44
Sensor range[m]: max 10

GENERAL PRODUCT PARAMETERS:

Energy consumption in on-mode (kWh/1000h): 50
Energy efficiency class: F
Useful luminous flux Φuse [lm]: 4000
Useful luminous flux Φuse [lm]: in wide cone (120°)
Correlated colour temperature [K]: 4000
On-mode power Pon [W]: 50
Height [mm]: 200
Width [mm]: 192
Depth [mm]: 63
Colour rendering index: 80
Chromaticity coordinates (x): 0.38
Chromaticity coordinates (y): 0.38

PARAMETERS FOR DIRECTIONAL LIGHT SOURCES:

Beam angle [°]: 100

PARAMETERS FOR LED AND OLED LIGHT SOURCES:

R9 colour rendering index value: 7
Survival factor: ≥0.9
The lumen maintenance factor: 0.93

PARAMETERS FOR LED AND OLED MAINS LIGHT SOURCES:

Displacement factor (cos φ1): 0.9
Colour consistency in McAdam ellipses: ≤6
LED light source replaces a fluorescent light source
without integrated ballast of a particular wattage: Not applicable
Flicker metric (Pst LM): ≤1,0
Stroboscopic effect metric (SVM): ≤0,4