wifi-thermostat-for-electric-infrared-heating-controlled-for-ios-and-android-smart-phone-programmable-bht1000-heat-decor
Wireless Touch screen programmable room thermostat BHT1000 -Wi-Fi with floor and room temperature sensor.
Ideal for any room, kitchen, hallway, bedroom, dinning room, office. Commercial and domestic use.
BHT1000 / W-WiFi – Wireless room thermostat with remote control electric heating via telephone, tablet or thermostat.
Heating via telephone can be controlled from anywhere in the world.
To make this possible:
Install BECA ENERGY (phone must have internet access)
Connect a WiFi thermostat to a local router that has access to the Internet.
It is possible to control from one phone with any number of thermostats installed and to control one thermostat with several phones, which allows all users to control the temperature of the heating.
The application allows comfortable control of each room where the thermostat is installed. Each of the rooms can be assigned a separate name. (Eg Living Room, Kitchen, Children’s Room, etc.) The thermostat is ideal for frequent travelers or holidaymakers. Direct heating control from the telephone will allow you to set up a comfortable indoor temperature before you arrive and save on heating costs during your absence.
The thermostat is equipped with a built-in air temperature sensor and an attached external floor temperature sensor. The thermostat can control both room temperature and floor temperature control. When the thermostat is used in underfloor heating, the thermostat activates the heating system to achieve the desired room temperature while not allowing the floor to override the floor temperature to protect the floor from excessive heat.
When using a thermostat, only the built-in air temperature sensor is used for heating the electric heater.
Power supply 230 V AC. Max. Load 16 A (3600 W)
Operating modes of the thermostat:
ROOM – Built-in air temperature sensor controls the room temperature, while the floor sensor is off. This mode is used in all types of electrical heating, except underfloor heating
ALL – built-in air temperature sensor controls room temperature and floor sensor limits floor temperature. Mode used in electric underfloor heating.
Characteristic:
Easy installation
Controlling heating from phone, tablet or thermostat
Acrylic front panel
Large backlit display
Elegant chrome frame
Touch-sensitive panel
Temperature programming in cycles 5 + 2
The internal and external sensors allow you to control both the air temperature and the floor temperature.
Suitable for installation in a standard 60mm round box
Installation method: flush-mounted – in the installation box
Warranty: 18 months
Technical Specifications:
Accuracy: ± 1 ℃
Hysteresis: Range 0 ° C to 5 ° C
Floor temperature range: 10-70 ℃
Room temperature range: 5-35 ℃
2 sensors: built-in air temperature sensor + floor sensor NTC sensor
Degree of protection: IP20
Output: max. 16 A, 3600 W
Power supply: 95 ~ 240 VAC, 50 ~ 60Hz
Application:
Floor heating with HEAT DECOR heating foil
Electric heaters
Heating cables
Heating mats
230 V electrical appliances controlled on / off
Set contains:
Thermostat with built-in air temperature sensor and WIFI module
Outdoor temperature sensor – NTC floor
Box
Mounting screws
English manual
