This CCT tunable LED strip uses dual-chip LEDs (warm 2700K + cool 6000K) to shift the white light anywhere from warm to cool on a single 24V strip. At a bright 1930 lm/m from 19.2 W, it's suited to main-room and task lighting where you want full control of white colour temperature, with a double PCB layer and 3oz copper paths for stable, cool-running performance.
|
Parameter |
Value |
|
SKU |
SPA-120-CCT-370 |
|
Chip type |
SMD (dual-chip CCT) |
|
Light type |
CCT Tunable (white) |
|
Colour temperature |
2700K - 6000K |
|
LEDs per metre |
120 |
|
Voltage |
24V DC |
|
Power per metre |
19.2W |
|
Luminous flux |
1930 lm/m |
|
Ingress protection |
IP20 (non-waterproof) |
|
Strip width |
12mm |
|
Copper trace thickness |
3oz |
|
PCB layers |
Double layer (PRO Version) |
|
Wiring |
3-core (CCT) |
|
Adhesive |
3M 300 LSE |
|
Cut points |
Every 5cm |
|
Lifespan |
75,000h |
|
Roll length |
30m (full roll) |
Choose this CCT tunable version if you want one strip that covers the whole white range - warm 2700K for relaxed evenings, cool 6000K for bright task light, and everything in between. If you only ever need a single fixed colour temperature, a standard white strip (2700K, 3000K, 4000K or 6000K) will be simpler and cheaper to control. At 120 LEDs/m and a bright 1930 lm/m it suits main-room lighting. This is an IP20 strip for dry indoor use only; if the run will face moisture (bathroom, kitchen splash zones, outdoors), choose a waterproof IP-rated version.
This strip requires a dedicated 24V DC power supply and cannot be connected directly to mains - size the driver with roughly 20% spare headroom (the configurator suggests ~23W or higher per metre). Because it's a CCT strip it needs 3-core wiring and a compatible CCT (dual-white) controller to adjust colour temperature; a single-colour dimmer won't tune the white. Cut only at the marked cut points (every 5cm), and mount it in a suitable aluminium profile for the best heat dissipation and finish.
Anywhere from 2700K (warm white) to 6000K (cool daylight white), plus every step in between — all from one strip using dual-chip LEDs.
It needs a CCT (dual-white) controller and 3-core wiring, plus a standard 24V DC driver for power.
Every 5cm, at the marked cut points — trimming there won't damage the rest of the strip.
No — it's rated IP20 with no protection against moisture. For wet or outdoor areas, choose a waterproof (IP-rated) version instead.
Yes — to tune the white you need a CCT controller. It also runs from a standard 24V DC driver for power.
| Color Changing | CCT Tunable |
|---|---|
| Watts per meter | 19.2 |
| Water Resistance | IP20 Non Waterproof |
| Voltage | 24V |
| Lumens per meter | 1930 |
| Number of LEDs/ Meter | 120 |
From €18.04 €14.67
To €34.45 €28.01
From €14.76 €12.00
To €28.14 €22.88
From €28.08 €22.83
To €44.49 €36.17
From €28.34 €23.04
To €44.75 €36.38
From €50.02 €40.67
To €95.12 €77.33
From €15.28 €12.42
To €33.58 €27.30
This CCT tunable LED strip uses dual-chip LEDs (warm 2700K + cool 6000K) to shift the white light anywhere from warm to cool on a single 24V strip. At a bright 1930 lm/m from 19.2 W, it's suited to main-room and task lighting where you want full control of white colour temperature, with a double PCB layer and 3oz copper paths for stable, cool-running performance.
|
Parameter |
Value |
|
SKU |
SPA-120-CCT-370 |
|
Chip type |
SMD (dual-chip CCT) |
|
Light type |
CCT Tunable (white) |
|
Colour temperature |
2700K - 6000K |
|
LEDs per metre |
120 |
|
Voltage |
24V DC |
|
Power per metre |
19.2W |
|
Luminous flux |
1930 lm/m |
|
Ingress protection |
IP20 (non-waterproof) |
|
Strip width |
12mm |
|
Copper trace thickness |
3oz |
|
PCB layers |
Double layer (PRO Version) |
|
Wiring |
3-core (CCT) |
|
Adhesive |
3M 300 LSE |
|
Cut points |
Every 5cm |
|
Lifespan |
75,000h |
|
Roll length |
30m (full roll) |
Choose this CCT tunable version if you want one strip that covers the whole white range - warm 2700K for relaxed evenings, cool 6000K for bright task light, and everything in between. If you only ever need a single fixed colour temperature, a standard white strip (2700K, 3000K, 4000K or 6000K) will be simpler and cheaper to control. At 120 LEDs/m and a bright 1930 lm/m it suits main-room lighting. This is an IP20 strip for dry indoor use only; if the run will face moisture (bathroom, kitchen splash zones, outdoors), choose a waterproof IP-rated version.
This strip requires a dedicated 24V DC power supply and cannot be connected directly to mains - size the driver with roughly 20% spare headroom (the configurator suggests ~23W or higher per metre). Because it's a CCT strip it needs 3-core wiring and a compatible CCT (dual-white) controller to adjust colour temperature; a single-colour dimmer won't tune the white. Cut only at the marked cut points (every 5cm), and mount it in a suitable aluminium profile for the best heat dissipation and finish.
Anywhere from 2700K (warm white) to 6000K (cool daylight white), plus every step in between — all from one strip using dual-chip LEDs.
It needs a CCT (dual-white) controller and 3-core wiring, plus a standard 24V DC driver for power.
Every 5cm, at the marked cut points — trimming there won't damage the rest of the strip.
No — it's rated IP20 with no protection against moisture. For wet or outdoor areas, choose a waterproof (IP-rated) version instead.
Yes — to tune the white you need a CCT controller. It also runs from a standard 24V DC driver for power.
+353 24 904 96
