+353 24 904 96
LED Strip SHF Cold White • 234 LED/m • 24V • 12W • 6000K • IP20 • 2450lm • 10mm • 3oz Cooper paths PRO Version
SKU
SHF-234-CW-454
LED Strip SHF Cold White 6000K
This SHF Cold White LED strip delivers a crisp, bright 6000K daylight tone on a 10mm tape, and at 2450 lm/m it's the brightest white in the SHF-234 series - all from just 12 W thanks to nine high-efficiency LEDs per module and up to 220 lm/W efficacy. The double PCB layer with 3oz copper paths keeps voltage drop and running temperature low, making it ideal where you want maximum clarity and light output with low energy use.
Key Features
- Cold White 6000K: crisp, bright daylight tone for high-visibility, task-focused spaces
- 2450 lm/m at 12 W/m on 24V: the brightest output in the SHF-234 series
- 9 high-efficiency LEDs per module: up to 220 lm/W for low energy use
- 234 LEDs/m (SMD): dense, even coverage across the strip
- 3oz copper paths + Double PCB Layer (PRO Version): lower voltage drop and cooler operation than single-layer strips
- 3M 300 LSE adhesive base: strong, reliable mounting
- LM-80 tested LEDs: minimal lumen depreciation and stable colour over time
Technical Specification
|
Parameter |
Value |
|
SKU |
SHF-234-CW-454 |
|
Chip type |
SMD (9 LEDs per module) |
|
Light type |
Cold White (single colour) |
|
Colour temperature |
6000K (Cold White) |
|
LEDs per metre |
234 |
|
Voltage |
24V DC |
|
Power per metre |
12W |
|
Luminous flux |
2450 lm/m |
|
Luminous efficacy |
up to 220 lm/W |
|
Ingress protection |
IP20 (non-waterproof) |
|
Strip width |
10mm |
|
Strip dimensions (IP20) |
10.0 × 1.4 mm |
|
Copper trace thickness |
3oz |
|
PCB layers |
Double layer (PRO Version) |
|
Roll length |
30m (full roll) |
Which Version Should You Choose?
Choose this 6000K Cold White version if you want the crispest, brightest daylight tone with very high output - ideal where clarity matters most, like workshops, garages, task areas and commercial spaces. The same SHF series is also available in 4000K Natural White, 3000K Warm White and 2700K Soft Warm; step down the colour temperature for a softer, cosier feel. This is the brightest white in the SHF-234 range at 2450 lm/m, and its exceptional efficiency (up to 220 lm/W) delivers more light per watt than most standard strips. It's an IP20 strip for dry indoor use only; for moisture-prone areas (bathroom, kitchen splash zones, outdoors), choose a waterproof IP-rated version.
Applications
- Bright task and work lighting for kitchens, garages and workshops
- Under-cabinet and worktop lighting where bright, clean light is wanted
- Cove, ceiling and shelf lighting in dry indoor areas
- Retail, display and commercial lighting needing maximum brightness
Installation
This strip requires a dedicated 24V DC power supply and cannot be connected directly to mains - size the driver with roughly 20% spare headroom (the configurator suggests ~14W or higher per metre). A controller is only needed if you want dimming; for a fixed Cold White strip like this, a simple 24V driver is sufficient. Cut only at the marked cut points along the strip, and mount it in a suitable aluminium profile for the best heat dissipation and finish.
FAQ
Why is the SHF series so efficient?
Each module packs nine high-efficiency LEDs, reaching up to 220 lm/W — so you get 2450 lm/m from just 12 W, more light per watt than most standard strips.
Is this the brightest white in the SHF range?
Yes — at 2450 lm/m the 6000K Cold White has the highest output of the SHF-234 white strips.
What's the difference between 6000K and 4000K?
6000K is a crisp, bright cool-daylight white; 4000K is a more neutral, daylight-balanced tone. Choose 6000K for maximum clarity, 4000K for a softer everyday look.
Can I use this strip in a bathroom or outdoors?
No — it's rated IP20 with no protection against moisture. For wet or outdoor areas, choose a waterproof (IP-rated) version instead.
Does it need a special controller?
No. It runs from a standard 24V DC driver. You only need a controller if you want dimming.
More Information
| HUE Color | 6000K Cold White |
|---|---|
| Watts per meter | 12 |
| Water Resistance | IP20 Non Waterproof |
| Voltage | 24V |
| Lumens per meter | 2450 |
| Number of LEDs/ Meter | 234 |
Reviews
Write Your Own Review
Related Products
We found other products you might like!
-
LED Profile • SURFACE • "Y" • WHITE • Aluminium • 2.02 Meters length • PRO • multi set •From €28.08 €22.83
To €44.49 €36.17
-
LED Profile • SURFACE • "RETO" • WHITE • Aluminium • 2.02 Meters length • PRO • multi set •From €61.44 €49.95
To €105.32 €85.63
-
LED Profile • RECESSED • ARCHITECTURAL • PLASTER IN • "TOPO" • WHITE • Aluminium • 2.02 Meters length • PRO • multi set •From €146.17 €118.84
To €204.89 €166.58
-
LED Profile • RECESSED • "J" • WHITE • Aluminium • 2.02 Meters length • PRO • multi set •From €29.85 €24.27
To €44.42 €36.11
-
LED Profile • SUSPENDED • ARCHITECTURAL • SURFACE • "DOPIO" • SILVER • Aluminium • 2.02 Meters lenght • PRO • multi set •From €74.43 €60.51
To €180.20 €146.50
-
LED Profile • SURFACE • ARCHITECTURAL • "TALIA" • BLACK • Aluminium • 2.02 Meters lenght • PRO • multi set •From €74.16 €60.29
To €178.03 €144.74
LED Strip SHF Cold White 6000K
This SHF Cold White LED strip delivers a crisp, bright 6000K daylight tone on a 10mm tape, and at 2450 lm/m it's the brightest white in the SHF-234 series - all from just 12 W thanks to nine high-efficiency LEDs per module and up to 220 lm/W efficacy. The double PCB layer with 3oz copper paths keeps voltage drop and running temperature low, making it ideal where you want maximum clarity and light output with low energy use.
Key Features
- Cold White 6000K: crisp, bright daylight tone for high-visibility, task-focused spaces
- 2450 lm/m at 12 W/m on 24V: the brightest output in the SHF-234 series
- 9 high-efficiency LEDs per module: up to 220 lm/W for low energy use
- 234 LEDs/m (SMD): dense, even coverage across the strip
- 3oz copper paths + Double PCB Layer (PRO Version): lower voltage drop and cooler operation than single-layer strips
- 3M 300 LSE adhesive base: strong, reliable mounting
- LM-80 tested LEDs: minimal lumen depreciation and stable colour over time
Technical Specification
|
Parameter |
Value |
|
SKU |
SHF-234-CW-454 |
|
Chip type |
SMD (9 LEDs per module) |
|
Light type |
Cold White (single colour) |
|
Colour temperature |
6000K (Cold White) |
|
LEDs per metre |
234 |
|
Voltage |
24V DC |
|
Power per metre |
12W |
|
Luminous flux |
2450 lm/m |
|
Luminous efficacy |
up to 220 lm/W |
|
Ingress protection |
IP20 (non-waterproof) |
|
Strip width |
10mm |
|
Strip dimensions (IP20) |
10.0 × 1.4 mm |
|
Copper trace thickness |
3oz |
|
PCB layers |
Double layer (PRO Version) |
|
Roll length |
30m (full roll) |
Which Version Should You Choose?
Choose this 6000K Cold White version if you want the crispest, brightest daylight tone with very high output - ideal where clarity matters most, like workshops, garages, task areas and commercial spaces. The same SHF series is also available in 4000K Natural White, 3000K Warm White and 2700K Soft Warm; step down the colour temperature for a softer, cosier feel. This is the brightest white in the SHF-234 range at 2450 lm/m, and its exceptional efficiency (up to 220 lm/W) delivers more light per watt than most standard strips. It's an IP20 strip for dry indoor use only; for moisture-prone areas (bathroom, kitchen splash zones, outdoors), choose a waterproof IP-rated version.
Applications
- Bright task and work lighting for kitchens, garages and workshops
- Under-cabinet and worktop lighting where bright, clean light is wanted
- Cove, ceiling and shelf lighting in dry indoor areas
- Retail, display and commercial lighting needing maximum brightness
Installation
This strip requires a dedicated 24V DC power supply and cannot be connected directly to mains - size the driver with roughly 20% spare headroom (the configurator suggests ~14W or higher per metre). A controller is only needed if you want dimming; for a fixed Cold White strip like this, a simple 24V driver is sufficient. Cut only at the marked cut points along the strip, and mount it in a suitable aluminium profile for the best heat dissipation and finish.
FAQ
Why is the SHF series so efficient?
Each module packs nine high-efficiency LEDs, reaching up to 220 lm/W — so you get 2450 lm/m from just 12 W, more light per watt than most standard strips.
Is this the brightest white in the SHF range?
Yes — at 2450 lm/m the 6000K Cold White has the highest output of the SHF-234 white strips.
What's the difference between 6000K and 4000K?
6000K is a crisp, bright cool-daylight white; 4000K is a more neutral, daylight-balanced tone. Choose 6000K for maximum clarity, 4000K for a softer everyday look.
Can I use this strip in a bathroom or outdoors?
No — it's rated IP20 with no protection against moisture. For wet or outdoor areas, choose a waterproof (IP-rated) version instead.
Does it need a special controller?
No. It runs from a standard 24V DC driver. You only need a controller if you want dimming.
Write Your Own Review
