+353 24 904 96
LED Strip SHF Natural White • 144 LED/m • 24V • 5.5W • 4000K • IP20 • 1180lm • 8mm • 3oz Cooper paths PRO Version
SKU
SHF-144-NW-449
LED Strip SHF Natural White 4000K
This SHF Natural White LED strip delivers a clean, neutral 4000K light on a slim 8mm tape, reaching 1180 lm/m from just 5.5 W thanks to nine high-efficiency LEDs per module and up to 220 lm/W efficacy. The double PCB layer with 3oz copper paths keeps voltage drop and running temperature low, making it a highly efficient choice for bright, neutral indoor lighting.
Key Features
- Natural White 4000K: neutral, daylight-balanced tone with no yellow or blue cast
- 1180 lm/m at 5.5 W/m on 24V: strong output with outstanding efficiency
- 9 high-efficiency LEDs per module: up to 220 lm/W for very low energy use
- 144 LEDs/m (SMD): even coverage across the strip
- Slim 8mm width: fits narrow profiles and tight installations
- 3oz copper paths + Double PCB Layer (PRO Version): lower voltage drop and cooler operation than single-layer strips
- 3M 300 LSE adhesive base: strong, reliable mounting
- LM-80 tested LEDs: minimal lumen depreciation and stable colour over time
Technical Specification
|
Parameter |
Value |
|
SKU |
SHF-144-NW-449 |
|
Chip type |
SMD (9 LEDs per module) |
|
Light type |
Natural White (single colour) |
|
Colour temperature |
4000K (Natural White) |
|
LEDs per metre |
144 |
|
Voltage |
24V DC |
|
Power per metre |
5.5W |
|
Luminous flux |
1180 lm/m |
|
Luminous efficacy |
up to 220 lm/W |
|
Ingress protection |
IP20 (non-waterproof) |
|
Strip width |
8mm |
|
Strip dimensions (IP20) |
8.0 × 1.4 mm |
|
Copper trace thickness |
3oz |
|
PCB layers |
Double layer (PRO Version) |
|
Roll length |
30m (full roll) |
Which Version Should You Choose?
Choose this 4000K Natural White version if you want a neutral, daylight-balanced white with excellent efficiency - clean and functional for kitchens, offices, hallways and task areas. The same SHF series is also available in 2700K Soft Warm, 3000K Warm White and 6000K Cold White; step warmer for a cosier feel or cooler for maximum clarity. This is an IP20 strip for dry indoor use only; if the installation will face moisture (bathroom, kitchen splash zones, outdoors), choose the IP66 waterproof version of the same series. At 8mm wide it's slim and efficient, drawing just 5.5 W/m.
Applications
- Bright task and general lighting for kitchens, offices and hallways
- Under-cabinet and worktop lighting where clean, neutral light is wanted
- Cove, ceiling and shelf lighting in narrow aluminium profiles
- Retail, display and commercial lighting needing efficient, neutral white
Installation
This strip requires a dedicated 24V DC power supply and cannot be connected directly to mains - size the driver with roughly 20% spare headroom (the configurator suggests ~7W or higher per metre). A controller is only needed if you want dimming; for a fixed Natural White strip like this, a simple 24V driver is sufficient. Cut only at the marked cut points along the strip, and mount it in a suitable aluminium profile for the best heat dissipation and finish.
FAQ
Why is the SHF series so efficient?
Each module packs nine high-efficiency LEDs, reaching up to 220 lm/W — so you get 1180 lm/m from just 5.5 W, more light per watt than most standard strips.
What's the difference between 4000K and 3000K?
4000K is a neutral, daylight-balanced white that suits task areas; 3000K is warmer and cosier for relaxed spaces. Everything else stays the same.
Can I use this strip in a bathroom or outdoors?
No — it's rated IP20 with no protection against moisture. For wet or outdoor areas, choose the IP66 version of the same series instead.
Does it need a special controller?
No. It runs from a standard 24V DC driver. You only need a controller if you want dimming.
More Information
| HUE Color | 4000K Natural White |
|---|---|
| Watts per meter | 5.5 |
| Water Resistance | IP20 Non Waterproof |
| Voltage | 24V |
| Lumens per meter | 1180 |
| Number of LEDs/ Meter | 144 |
Reviews
Write Your Own Review
Related Products
We found other products you might like!
-
LED Profile • SURFACE • "Y" • WHITE • Aluminium • 2.02 Meters length • PRO • multi set •From €28.08 €22.83
To €44.49 €36.17
-
LED Profile • SURFACE • "RETO" • WHITE • Aluminium • 2.02 Meters length • PRO • multi set •From €61.44 €49.95
To €105.32 €85.63
-
LED Profile • RECESSED • ARCHITECTURAL • PLASTER IN • "TOPO" • WHITE • Aluminium • 2.02 Meters length • PRO • multi set •From €146.17 €118.84
To €204.89 €166.58
-
LED Profile • RECESSED • "J" • WHITE • Aluminium • 2.02 Meters length • PRO • multi set •From €29.85 €24.27
To €44.42 €36.11
-
LED Profile • SUSPENDED • ARCHITECTURAL • SURFACE • "DOPIO" • SILVER • Aluminium • 2.02 Meters lenght • PRO • multi set •From €74.43 €60.51
To €180.20 €146.50
-
LED Profile • SURFACE • ARCHITECTURAL • "TALIA" • BLACK • Aluminium • 2.02 Meters lenght • PRO • multi set •From €74.16 €60.29
To €178.03 €144.74
LED Strip SHF Natural White 4000K
This SHF Natural White LED strip delivers a clean, neutral 4000K light on a slim 8mm tape, reaching 1180 lm/m from just 5.5 W thanks to nine high-efficiency LEDs per module and up to 220 lm/W efficacy. The double PCB layer with 3oz copper paths keeps voltage drop and running temperature low, making it a highly efficient choice for bright, neutral indoor lighting.
Key Features
- Natural White 4000K: neutral, daylight-balanced tone with no yellow or blue cast
- 1180 lm/m at 5.5 W/m on 24V: strong output with outstanding efficiency
- 9 high-efficiency LEDs per module: up to 220 lm/W for very low energy use
- 144 LEDs/m (SMD): even coverage across the strip
- Slim 8mm width: fits narrow profiles and tight installations
- 3oz copper paths + Double PCB Layer (PRO Version): lower voltage drop and cooler operation than single-layer strips
- 3M 300 LSE adhesive base: strong, reliable mounting
- LM-80 tested LEDs: minimal lumen depreciation and stable colour over time
Technical Specification
|
Parameter |
Value |
|
SKU |
SHF-144-NW-449 |
|
Chip type |
SMD (9 LEDs per module) |
|
Light type |
Natural White (single colour) |
|
Colour temperature |
4000K (Natural White) |
|
LEDs per metre |
144 |
|
Voltage |
24V DC |
|
Power per metre |
5.5W |
|
Luminous flux |
1180 lm/m |
|
Luminous efficacy |
up to 220 lm/W |
|
Ingress protection |
IP20 (non-waterproof) |
|
Strip width |
8mm |
|
Strip dimensions (IP20) |
8.0 × 1.4 mm |
|
Copper trace thickness |
3oz |
|
PCB layers |
Double layer (PRO Version) |
|
Roll length |
30m (full roll) |
Which Version Should You Choose?
Choose this 4000K Natural White version if you want a neutral, daylight-balanced white with excellent efficiency - clean and functional for kitchens, offices, hallways and task areas. The same SHF series is also available in 2700K Soft Warm, 3000K Warm White and 6000K Cold White; step warmer for a cosier feel or cooler for maximum clarity. This is an IP20 strip for dry indoor use only; if the installation will face moisture (bathroom, kitchen splash zones, outdoors), choose the IP66 waterproof version of the same series. At 8mm wide it's slim and efficient, drawing just 5.5 W/m.
Applications
- Bright task and general lighting for kitchens, offices and hallways
- Under-cabinet and worktop lighting where clean, neutral light is wanted
- Cove, ceiling and shelf lighting in narrow aluminium profiles
- Retail, display and commercial lighting needing efficient, neutral white
Installation
This strip requires a dedicated 24V DC power supply and cannot be connected directly to mains - size the driver with roughly 20% spare headroom (the configurator suggests ~7W or higher per metre). A controller is only needed if you want dimming; for a fixed Natural White strip like this, a simple 24V driver is sufficient. Cut only at the marked cut points along the strip, and mount it in a suitable aluminium profile for the best heat dissipation and finish.
FAQ
Why is the SHF series so efficient?
Each module packs nine high-efficiency LEDs, reaching up to 220 lm/W — so you get 1180 lm/m from just 5.5 W, more light per watt than most standard strips.
What's the difference between 4000K and 3000K?
4000K is a neutral, daylight-balanced white that suits task areas; 3000K is warmer and cosier for relaxed spaces. Everything else stays the same.
Can I use this strip in a bathroom or outdoors?
No — it's rated IP20 with no protection against moisture. For wet or outdoor areas, choose the IP66 version of the same series instead.
Does it need a special controller?
No. It runs from a standard 24V DC driver. You only need a controller if you want dimming.
Write Your Own Review
