This waterproof Ultra Soft Warm White LED strip brings an ultra-warm 2200K glow to outdoor and wet areas, rated IP66/68 and reaching a bright 1900 lm/m from just 17 W. Built with seven LEDs per module for up to 140 lm/W efficiency and a double PCB layer with 3oz copper paths, it's designed to replace traditional or spot lighting in architectural profiles - indoors or out - while surviving rain, splashes and damp.
|
Parameter |
Value |
|
SKU |
WP-SPE-168-UHW-470 |
|
Chip type |
SMD (7 LEDs per module) |
|
Light type |
Ultra Soft Warm White (single colour) |
|
Colour temperature |
2200K (Ultra Soft Warm) |
|
LEDs per metre |
168 |
|
Voltage |
24V DC |
|
Power per metre |
17W |
|
Luminous flux |
1900 lm/m |
|
Luminous efficacy |
up to 140 lm/W |
|
CRI |
Ra90 |
|
Ingress protection |
IP66/68 (waterproof) |
|
Strip width |
10mm |
|
Strip dimensions (IP20 base) |
8.0 × 1.4 mm |
|
Copper trace thickness |
3oz |
|
PCB layers |
Double layer (PRO Version) |
|
Adhesive |
3M 300 LSE |
|
Cut points |
Every 4.16cm |
|
Lifespan |
75,000h |
|
Roll length |
10m (full roll) |
Choose this waterproof IP66/68 version whenever the strip will face moisture - outdoor facades, garden features, bathrooms, kitchens near a sink, or any damp area. If your installation is purely indoors and dry, a standard IP20 COB strip will be cheaper and slimmer. The 2200K tone here is the warmest, most amber option; the same SPE-168 series is also available in 2700K, 3000K, 4000K and 6000K for progressively cleaner, cooler light. With 168 SMD LEDs/m and 1900 lm/m, this is an ultra-high-bright strip suited to architectural profiles and demanding outdoor jobs.
This strip requires a dedicated 24V DC power supply and cannot be connected directly to mains - size the driver with roughly 20% spare headroom (the configurator suggests ~20W or higher per metre). A controller is only needed if you want dimming; for a fixed white strip like this, a simple 24V driver is sufficient. It is waterproof (IP66/68) and suitable for outdoor and wet areas; still use appropriate waterproof connectors and driver housing for outdoor runs. Cut only at the marked cut points (every 4.16cm), and mount it in a suitable aluminium profile for the best heat dissipation and finish.
Rated IP66/68, this strip is protected against powerful water jets (IP66) and the effects of immersion (IP68), making it suitable for outdoor use, facades, garden and landscape features, and wet indoor areas such as bathrooms and kitchens. For a fully weatherproof result, pair it with waterproof connectors and an appropriately rated (IP67) driver, and seal cut ends correctly.
Yes — it's rated IP66/68, so it's protected against heavy water jets and immersion, making it suitable for outdoor, garden and wet-area installations.
It's an ultra-warm, amber, candle-like white — warmer than 2700K — ideal for cosy, atmospheric outdoor and hospitality lighting.
Every 4.16cm, at the marked cut points — trimming there won't damage the rest of the strip.
Each module packs seven LEDs, giving up to 140 lm/W efficiency — so you get over 1900 lm/m from just 17 W.
It runs from a standard 24V DC driver. For outdoor use, choose a waterproof/IP-rated driver and waterproof connectors.
| HUE Color | 2200K Ultra Soft Warm |
|---|---|
| Watts per meter | 17 |
| Water Resistance | IP66 Heat Shrink WP |
| Voltage | 24V |
| Lumens per meter | 1900 |
| Number of LEDs/ Meter | 168 |
From €30.47 €24.77
To €46.88 €38.11
From €80.43 €65.39
To €97.60 €79.35
From €65.28 €53.07
To €82.45 €67.03
From €44.12 €35.87
To €89.68 €72.91
From €75.69 €61.54
To €109.31 €88.87
From €70.09 €56.98
To €103.70 €84.31
This waterproof Ultra Soft Warm White LED strip brings an ultra-warm 2200K glow to outdoor and wet areas, rated IP66/68 and reaching a bright 1900 lm/m from just 17 W. Built with seven LEDs per module for up to 140 lm/W efficiency and a double PCB layer with 3oz copper paths, it's designed to replace traditional or spot lighting in architectural profiles - indoors or out - while surviving rain, splashes and damp.
|
Parameter |
Value |
|
SKU |
WP-SPE-168-UHW-470 |
|
Chip type |
SMD (7 LEDs per module) |
|
Light type |
Ultra Soft Warm White (single colour) |
|
Colour temperature |
2200K (Ultra Soft Warm) |
|
LEDs per metre |
168 |
|
Voltage |
24V DC |
|
Power per metre |
17W |
|
Luminous flux |
1900 lm/m |
|
Luminous efficacy |
up to 140 lm/W |
|
CRI |
Ra90 |
|
Ingress protection |
IP66/68 (waterproof) |
|
Strip width |
10mm |
|
Strip dimensions (IP20 base) |
8.0 × 1.4 mm |
|
Copper trace thickness |
3oz |
|
PCB layers |
Double layer (PRO Version) |
|
Adhesive |
3M 300 LSE |
|
Cut points |
Every 4.16cm |
|
Lifespan |
75,000h |
|
Roll length |
10m (full roll) |
Choose this waterproof IP66/68 version whenever the strip will face moisture - outdoor facades, garden features, bathrooms, kitchens near a sink, or any damp area. If your installation is purely indoors and dry, a standard IP20 COB strip will be cheaper and slimmer. The 2200K tone here is the warmest, most amber option; the same SPE-168 series is also available in 2700K, 3000K, 4000K and 6000K for progressively cleaner, cooler light. With 168 SMD LEDs/m and 1900 lm/m, this is an ultra-high-bright strip suited to architectural profiles and demanding outdoor jobs.
This strip requires a dedicated 24V DC power supply and cannot be connected directly to mains - size the driver with roughly 20% spare headroom (the configurator suggests ~20W or higher per metre). A controller is only needed if you want dimming; for a fixed white strip like this, a simple 24V driver is sufficient. It is waterproof (IP66/68) and suitable for outdoor and wet areas; still use appropriate waterproof connectors and driver housing for outdoor runs. Cut only at the marked cut points (every 4.16cm), and mount it in a suitable aluminium profile for the best heat dissipation and finish.
Rated IP66/68, this strip is protected against powerful water jets (IP66) and the effects of immersion (IP68), making it suitable for outdoor use, facades, garden and landscape features, and wet indoor areas such as bathrooms and kitchens. For a fully weatherproof result, pair it with waterproof connectors and an appropriately rated (IP67) driver, and seal cut ends correctly.
Yes — it's rated IP66/68, so it's protected against heavy water jets and immersion, making it suitable for outdoor, garden and wet-area installations.
It's an ultra-warm, amber, candle-like white — warmer than 2700K — ideal for cosy, atmospheric outdoor and hospitality lighting.
Every 4.16cm, at the marked cut points — trimming there won't damage the rest of the strip.
Each module packs seven LEDs, giving up to 140 lm/W efficiency — so you get over 1900 lm/m from just 17 W.
It runs from a standard 24V DC driver. For outdoor use, choose a waterproof/IP-rated driver and waterproof connectors.
+353 24 904 96
