This waterproof Amber Warm White COB LED strip brings an ultra-warm, golden 1800K glow to outdoor and wet areas, rated IP66 with a continuous, dot-free line of light. At 520 lm/m from 8 W, it's built for cosy, atmospheric accent lighting where moisture is a factor - garden features, facades, bathrooms - with a double PCB layer and 2oz copper paths for stable, cool-running performance.
|
Parameter |
Value |
|
SKU |
WP-COB-320-AWW-390 |
|
Chip type |
COB (Spotless) |
|
Light type |
Amber Warm White (single colour) |
|
Colour temperature |
1800K (Amber Warm White) |
|
LEDs per metre |
320 |
|
Voltage |
24V DC |
|
Power per metre |
8W |
|
Luminous flux |
520 lm/m |
|
Beam angle |
>160° |
|
Ingress protection |
IP66 (waterproof) |
|
Strip width |
8mm |
|
Strip dimensions (IP66) |
8.3 × 2.0 mm |
|
Copper trace thickness |
2oz |
|
PCB layers |
Double layer (PRO Version) |
|
Cut points |
Every 5cm |
|
Lifespan |
50,000h |
|
Roll length |
10m (full roll) |
Choose this waterproof IP66 version whenever the strip will face moisture - outdoor facades, garden features, bathrooms or kitchen splash zones. If your installation is dry and indoors, the standard IP20 COB Amber strip is cheaper and slimmer. The 1800K tone here is the warmest, most golden option; for a slightly cleaner warm, step up to 2200K, 2700K or 3000K, or go higher (4000K, 6000K) for functional white. At 520 lm/m it's an accent-level output rather than a main task light.
This strip requires a dedicated 24V DC power supply and cannot be connected directly to mains - size the driver with roughly 20% spare headroom (the configurator suggests ~10W or higher per metre). A controller is only needed if you want dimming; for a fixed Amber strip like this, a simple 24V driver is sufficient. It is waterproof (IP66) and suitable for outdoor and wet areas; still use waterproof connectors and an appropriately rated driver for outdoor runs. Cut only at the marked cut points (every 5cm), and mount it in a suitable aluminium profile for the best heat dissipation and finish.
Rated IP66, this strip is protected against powerful water jets and heavy splashes, making it suitable for outdoor use, facades, garden and landscape features, and wet indoor areas such as bathrooms and kitchens. For a fully weatherproof result, pair it with waterproof connectors and an IP-rated (IP67) driver, and seal cut ends correctly.
Yes — it's rated IP66, so it's protected against heavy water jets and splashes, making it suitable for outdoor, garden and wet-area installations.
It's an ultra-warm, golden, amber white — warmer than 2200K or 2700K — giving a candle-like, cosy glow ideal for atmospheric lighting.
Every 5cm, at the marked cut points — trimming there won't damage the rest of the strip.
At 520 lm/m it's an accent-level output — great for mood and atmosphere, but for a main task light choose a brighter, cooler strip.
It runs from a standard 24V DC driver. For outdoor use, choose a waterproof/IP-rated driver and waterproof connectors.
| HUE Color | 2200K Ultra Soft Warm |
|---|---|
| Watts per meter | 8 |
| Water Resistance | IP66 Heat Shrink WP |
| Voltage | 24V |
| Lumens per meter | 650 |
| Number of LEDs/ Meter | 320 |
From €44.64 €36.29
To €60.31 €49.03
From €38.04 €30.93
To €53.71 €43.67
From €45.46 €36.96
To €61.13 €49.70
From €140.06 €113.87
To €299.48 €243.48
From €71.04 €57.76
To €107.63 €87.50
From €78.88 €64.13
To €126.76 €103.06
This waterproof Amber Warm White COB LED strip brings an ultra-warm, golden 1800K glow to outdoor and wet areas, rated IP66 with a continuous, dot-free line of light. At 520 lm/m from 8 W, it's built for cosy, atmospheric accent lighting where moisture is a factor - garden features, facades, bathrooms - with a double PCB layer and 2oz copper paths for stable, cool-running performance.
|
Parameter |
Value |
|
SKU |
WP-COB-320-AWW-390 |
|
Chip type |
COB (Spotless) |
|
Light type |
Amber Warm White (single colour) |
|
Colour temperature |
1800K (Amber Warm White) |
|
LEDs per metre |
320 |
|
Voltage |
24V DC |
|
Power per metre |
8W |
|
Luminous flux |
520 lm/m |
|
Beam angle |
>160° |
|
Ingress protection |
IP66 (waterproof) |
|
Strip width |
8mm |
|
Strip dimensions (IP66) |
8.3 × 2.0 mm |
|
Copper trace thickness |
2oz |
|
PCB layers |
Double layer (PRO Version) |
|
Cut points |
Every 5cm |
|
Lifespan |
50,000h |
|
Roll length |
10m (full roll) |
Choose this waterproof IP66 version whenever the strip will face moisture - outdoor facades, garden features, bathrooms or kitchen splash zones. If your installation is dry and indoors, the standard IP20 COB Amber strip is cheaper and slimmer. The 1800K tone here is the warmest, most golden option; for a slightly cleaner warm, step up to 2200K, 2700K or 3000K, or go higher (4000K, 6000K) for functional white. At 520 lm/m it's an accent-level output rather than a main task light.
This strip requires a dedicated 24V DC power supply and cannot be connected directly to mains - size the driver with roughly 20% spare headroom (the configurator suggests ~10W or higher per metre). A controller is only needed if you want dimming; for a fixed Amber strip like this, a simple 24V driver is sufficient. It is waterproof (IP66) and suitable for outdoor and wet areas; still use waterproof connectors and an appropriately rated driver for outdoor runs. Cut only at the marked cut points (every 5cm), and mount it in a suitable aluminium profile for the best heat dissipation and finish.
Rated IP66, this strip is protected against powerful water jets and heavy splashes, making it suitable for outdoor use, facades, garden and landscape features, and wet indoor areas such as bathrooms and kitchens. For a fully weatherproof result, pair it with waterproof connectors and an IP-rated (IP67) driver, and seal cut ends correctly.
Yes — it's rated IP66, so it's protected against heavy water jets and splashes, making it suitable for outdoor, garden and wet-area installations.
It's an ultra-warm, golden, amber white — warmer than 2200K or 2700K — giving a candle-like, cosy glow ideal for atmospheric lighting.
Every 5cm, at the marked cut points — trimming there won't damage the rest of the strip.
At 520 lm/m it's an accent-level output — great for mood and atmosphere, but for a main task light choose a brighter, cooler strip.
It runs from a standard 24V DC driver. For outdoor use, choose a waterproof/IP-rated driver and waterproof connectors.
+353 24 904 96
