This waterproof CCT tunable COB LED strip lets you shift the white light from warm 2700K to cool 6500K on a single spotless 10mm tape, rated IP66 for outdoor and wet areas. At a bright 1350 lm/m with a continuous, dot-free line of light, it's ideal for tunable white in bathrooms, kitchens and outdoor features, while the double PCB layer with 2oz copper paths keeps voltage drop and running temperature low.
|
Parameter |
Value |
|
SKU |
WP-COB-640-397 |
|
Chip type |
COB (Spotless) |
|
Light type |
CCT Tunable (white) |
|
Colour temperature |
2700K - 6500K |
|
LEDs per metre |
640 |
|
Voltage |
24V DC |
|
Power per metre |
16W |
|
Luminous flux |
1350 lm/m |
|
Beam angle |
>160° |
|
Ingress protection |
IP66 (waterproof) |
|
Strip width |
10mm |
|
Copper trace thickness |
2oz |
|
PCB layers |
Double layer (PRO Version) |
|
Wiring |
3-core (CCT) |
|
Cut points |
Every 2.5cm (25mm) |
|
Lifespan |
50,000h |
|
Roll length |
10m (full roll) |
Choose this waterproof IP66 CCT tunable version if you want one strip that covers the whole white range - warm 2700K to cool 6500K - in areas that face moisture, like bathrooms, kitchens or outdoor features. If your run is dry and indoors, the IP20 version is cheaper and slimmer. If you only ever need a single fixed colour temperature, a standard white COB strip will be simpler and cheaper to control. At 640 LEDs/m and 1350 lm/m it's dense and bright enough for main-room lighting.
This strip requires a dedicated 24V DC power supply and cannot be connected directly to mains - size the driver with roughly 20% spare headroom (the configurator suggests ~19W or higher per metre). Because it's a CCT strip it needs 3-core wiring and a compatible CCT (dual-white) controller to adjust colour temperature; a single-colour dimmer won't tune the white. It is waterproof (IP66) and suitable for outdoor and wet areas; still use waterproof connectors and an appropriately rated driver for outdoor runs. Cut only at the marked cut points (every 2.5cm), and mount it in a suitable aluminium profile for the best heat dissipation and finish.
Rated IP66, this strip is protected against powerful water jets and heavy splashes, making it suitable for outdoor use, facades, garden and landscape features, and wet indoor areas such as bathrooms and kitchens. For a fully weatherproof result, pair it with waterproof connectors and an IP-rated (IP67) driver, and seal cut ends correctly.
Yes — it's rated IP66, so it's protected against heavy water jets and splashes, making it suitable for outdoor, garden and wet-area installations.
Anywhere from 2700K (warm white) to 6500K (cool daylight white), plus every step in between — all from one strip.
It needs a CCT (dual-white) controller and 3-core wiring, plus a standard 24V DC driver for power.
Every 2.5cm (25mm), at the marked cut points — trimming there won't damage the rest of the strip.
| Color Changing | CCT Tunable |
|---|---|
| Watts per meter | 16 |
| Water Resistance | IP66 Heat Shrink WP |
| Voltage | 24V |
| Lumens per meter | 1350 |
From €18.71 €15.21
To €33.27 €27.05
From €54.71 €44.48
To €70.38 €57.22
From €25.13 €20.43
To €26.60 €21.63
From €45.46 €36.96
To €61.13 €49.70
From €76.88 €62.50
To €122.37 €99.49
From €74.16 €60.29
To €177.46 €144.28
This waterproof CCT tunable COB LED strip lets you shift the white light from warm 2700K to cool 6500K on a single spotless 10mm tape, rated IP66 for outdoor and wet areas. At a bright 1350 lm/m with a continuous, dot-free line of light, it's ideal for tunable white in bathrooms, kitchens and outdoor features, while the double PCB layer with 2oz copper paths keeps voltage drop and running temperature low.
|
Parameter |
Value |
|
SKU |
WP-COB-640-397 |
|
Chip type |
COB (Spotless) |
|
Light type |
CCT Tunable (white) |
|
Colour temperature |
2700K - 6500K |
|
LEDs per metre |
640 |
|
Voltage |
24V DC |
|
Power per metre |
16W |
|
Luminous flux |
1350 lm/m |
|
Beam angle |
>160° |
|
Ingress protection |
IP66 (waterproof) |
|
Strip width |
10mm |
|
Copper trace thickness |
2oz |
|
PCB layers |
Double layer (PRO Version) |
|
Wiring |
3-core (CCT) |
|
Cut points |
Every 2.5cm (25mm) |
|
Lifespan |
50,000h |
|
Roll length |
10m (full roll) |
Choose this waterproof IP66 CCT tunable version if you want one strip that covers the whole white range - warm 2700K to cool 6500K - in areas that face moisture, like bathrooms, kitchens or outdoor features. If your run is dry and indoors, the IP20 version is cheaper and slimmer. If you only ever need a single fixed colour temperature, a standard white COB strip will be simpler and cheaper to control. At 640 LEDs/m and 1350 lm/m it's dense and bright enough for main-room lighting.
This strip requires a dedicated 24V DC power supply and cannot be connected directly to mains - size the driver with roughly 20% spare headroom (the configurator suggests ~19W or higher per metre). Because it's a CCT strip it needs 3-core wiring and a compatible CCT (dual-white) controller to adjust colour temperature; a single-colour dimmer won't tune the white. It is waterproof (IP66) and suitable for outdoor and wet areas; still use waterproof connectors and an appropriately rated driver for outdoor runs. Cut only at the marked cut points (every 2.5cm), and mount it in a suitable aluminium profile for the best heat dissipation and finish.
Rated IP66, this strip is protected against powerful water jets and heavy splashes, making it suitable for outdoor use, facades, garden and landscape features, and wet indoor areas such as bathrooms and kitchens. For a fully weatherproof result, pair it with waterproof connectors and an IP-rated (IP67) driver, and seal cut ends correctly.
Yes — it's rated IP66, so it's protected against heavy water jets and splashes, making it suitable for outdoor, garden and wet-area installations.
Anywhere from 2700K (warm white) to 6500K (cool daylight white), plus every step in between — all from one strip.
It needs a CCT (dual-white) controller and 3-core wiring, plus a standard 24V DC driver for power.
Every 2.5cm (25mm), at the marked cut points — trimming there won't damage the rest of the strip.
+353 24 904 96
