LED Strip COB Soft Warm • Spotless • 24V • 8W • 2700K • IP66 • 740lm • 8mm • 2oz Cooper paths PRO Version • Waterproof

In stock
SKU
WP-COB-320-HW-390
Meters
- +

Select LED Strip IP Rate

-
+
-
+
 full roll

Suggested LED Power Supply

RULE: (Strip/M * Watts/M + 20% spare room)

Watts or higher

Price Included

Total LED Strips - -
Tails flex wire - -
Preparation Fee - -
TOTAL -
Loading configurator...

LED Strip COB Soft Warm 2700K IP66 Waterproof

This waterproof Soft Warm COB LED strip brings a warm, cosy 2700K glow to outdoor and wet areas, rated IP66 with a continuous, dot-free line of light. At 740 lm/m from just 8 W it's an efficient choice for accent and ambient lighting where moisture is a factor - garden features, facades, bathrooms - with a double PCB layer and 2oz copper paths for stable, cool-running performance.

Key Features

  • Waterproof IP66: protected against heavy splashes and rain for outdoor and wet-area use
  • Soft Warm White 2700K: a warm, cosy tone for relaxed, inviting spaces
  • COB Spotless design: continuous, dot-free line of light with no visible LED points
  • 320 LEDs/m: even coverage across the strip
  • 740 lm/m at 8 W/m on 24V: efficient output for accent and ambient lighting
  • Wide beam angle over 160°: broad, even wash of light
  • 2oz copper paths + Double PCB Layer (PRO Version): lower voltage drop and cooler operation than single-layer strips
  • 50,000h lifespan: long service life for permanent installs

Technical Specification

Parameter

Value

SKU

WP-COB-320-HW-390

Chip type

COB (Spotless)

Light type

Soft Warm White (single colour)

Colour temperature

2700K (Soft Warm White)

LEDs per metre

320

Voltage

24V DC

Power per metre

8W

Luminous flux

740 lm/m

Beam angle

>160°

Ingress protection

IP66 (waterproof)

Strip width

8.3mm

Strip dimensions (IP66)

8.3 × 2.0 mm

Copper trace thickness

2oz

PCB layers

Double layer (PRO Version)

Cut points

Every 5cm

Lifespan

50,000h

Roll length

10m (full roll)

Which Version Should You Choose?

Choose this waterproof IP66 version whenever the strip will face moisture - outdoor facades, garden features, bathrooms or kitchen splash zones - while wanting a warm, cosy 2700K tone. If your installation is dry and indoors, the IP20 version is cheaper and slimmer. The same COB-320 series is also available in 3000K Warm White, 4000K Natural White and 6000K Cold White; step up the colour temperature for cleaner, more functional light. At 320 LEDs/m and 8 W it's an efficient, accent-to-ambient-level strip.

Applications

  • Outdoor accent and facade lighting with a warm tone
  • Garden, deck and landscape feature lighting
  • Bathroom and wet-room lighting (splash-exposed areas)
  • Kitchen lighting near sinks and splash zones
  • Cove and profile lighting in damp or humid indoor spaces

Installation

This strip requires a dedicated 24V DC power supply and cannot be connected directly to mains - size the driver with roughly 20% spare headroom (the configurator suggests ~10W or higher per metre). A controller is only needed if you want dimming; for a fixed Soft Warm strip like this, a simple 24V driver is sufficient. It is waterproof (IP66) and suitable for outdoor and wet areas; still use waterproof connectors and an appropriately rated driver for outdoor runs. Cut only at the marked cut points (every 5cm), and mount it in a suitable aluminium profile for the best heat dissipation and finish.

Waterproof

Rated IP66, this strip is protected against powerful water jets and heavy splashes, making it suitable for outdoor use, facades, garden and landscape features, and wet indoor areas such as bathrooms and kitchens. For a fully weatherproof result, pair it with waterproof connectors and an IP-rated (IP67) driver, and seal cut ends correctly.

FAQ

Can this strip be used outdoors?

Yes — it's rated IP66, so it's protected against heavy water jets and splashes, making it suitable for outdoor, garden and wet-area installations.

What does 2700K Soft Warm look like?

It's a warm, cosy, inviting white — ideal for relaxed spaces and atmospheric outdoor lighting.

How often can this strip be cut?

Every 5cm, at the marked cut points — trimming there won't damage the rest of the strip.

Does it need a special power supply?

It runs from a standard 24V DC driver. For outdoor use, choose a waterproof/IP-rated driver and waterproof connectors.

More Information

More Information
HUE Color 2700K Soft Warm White
Watts per meter 8
Water Resistance IP66 Heat Shrink WP
Voltage 24V
Lumens per meter 740
Number of LEDs/ Meter 320

Reviews

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
We found other products you might like!

LED Strip COB Soft Warm 2700K IP66 Waterproof

This waterproof Soft Warm COB LED strip brings a warm, cosy 2700K glow to outdoor and wet areas, rated IP66 with a continuous, dot-free line of light. At 740 lm/m from just 8 W it's an efficient choice for accent and ambient lighting where moisture is a factor - garden features, facades, bathrooms - with a double PCB layer and 2oz copper paths for stable, cool-running performance.

Key Features

  • Waterproof IP66: protected against heavy splashes and rain for outdoor and wet-area use
  • Soft Warm White 2700K: a warm, cosy tone for relaxed, inviting spaces
  • COB Spotless design: continuous, dot-free line of light with no visible LED points
  • 320 LEDs/m: even coverage across the strip
  • 740 lm/m at 8 W/m on 24V: efficient output for accent and ambient lighting
  • Wide beam angle over 160°: broad, even wash of light
  • 2oz copper paths + Double PCB Layer (PRO Version): lower voltage drop and cooler operation than single-layer strips
  • 50,000h lifespan: long service life for permanent installs

Technical Specification

Parameter

Value

SKU

WP-COB-320-HW-390

Chip type

COB (Spotless)

Light type

Soft Warm White (single colour)

Colour temperature

2700K (Soft Warm White)

LEDs per metre

320

Voltage

24V DC

Power per metre

8W

Luminous flux

740 lm/m

Beam angle

>160°

Ingress protection

IP66 (waterproof)

Strip width

8.3mm

Strip dimensions (IP66)

8.3 × 2.0 mm

Copper trace thickness

2oz

PCB layers

Double layer (PRO Version)

Cut points

Every 5cm

Lifespan

50,000h

Roll length

10m (full roll)

Which Version Should You Choose?

Choose this waterproof IP66 version whenever the strip will face moisture - outdoor facades, garden features, bathrooms or kitchen splash zones - while wanting a warm, cosy 2700K tone. If your installation is dry and indoors, the IP20 version is cheaper and slimmer. The same COB-320 series is also available in 3000K Warm White, 4000K Natural White and 6000K Cold White; step up the colour temperature for cleaner, more functional light. At 320 LEDs/m and 8 W it's an efficient, accent-to-ambient-level strip.

Applications

  • Outdoor accent and facade lighting with a warm tone
  • Garden, deck and landscape feature lighting
  • Bathroom and wet-room lighting (splash-exposed areas)
  • Kitchen lighting near sinks and splash zones
  • Cove and profile lighting in damp or humid indoor spaces

Installation

This strip requires a dedicated 24V DC power supply and cannot be connected directly to mains - size the driver with roughly 20% spare headroom (the configurator suggests ~10W or higher per metre). A controller is only needed if you want dimming; for a fixed Soft Warm strip like this, a simple 24V driver is sufficient. It is waterproof (IP66) and suitable for outdoor and wet areas; still use waterproof connectors and an appropriately rated driver for outdoor runs. Cut only at the marked cut points (every 5cm), and mount it in a suitable aluminium profile for the best heat dissipation and finish.

Waterproof

Rated IP66, this strip is protected against powerful water jets and heavy splashes, making it suitable for outdoor use, facades, garden and landscape features, and wet indoor areas such as bathrooms and kitchens. For a fully weatherproof result, pair it with waterproof connectors and an IP-rated (IP67) driver, and seal cut ends correctly.

FAQ

Can this strip be used outdoors?

Yes — it's rated IP66, so it's protected against heavy water jets and splashes, making it suitable for outdoor, garden and wet-area installations.

What does 2700K Soft Warm look like?

It's a warm, cosy, inviting white — ideal for relaxed spaces and atmospheric outdoor lighting.

How often can this strip be cut?

Every 5cm, at the marked cut points — trimming there won't damage the rest of the strip.

Does it need a special power supply?

It runs from a standard 24V DC driver. For outdoor use, choose a waterproof/IP-rated driver and waterproof connectors.

Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account
WhatsApp Chat WhatsApp Chat