This waterproof Cold White COB LED strip brings a crisp, bright 6000K daylight tone to outdoor and wet areas, rated IP66 with a continuous, dot-free line of light. At 1060 lm/m from 10 W and a dense 528 LEDs/m, it's built for bright task and accent lighting where moisture is a factor - garden features, facades, bathrooms - with a double PCB layer and 2oz copper paths for stable, cool-running performance.
|
Parameter |
Value |
|
SKU |
WP-COB-528-CW-396 |
|
Chip type |
COB (Spotless) |
|
Light type |
Cold White (single colour) |
|
Colour temperature |
6000K (Cold White) |
|
LEDs per metre |
528 |
|
Voltage |
24V DC |
|
Power per metre |
10W |
|
Luminous flux |
1060 lm/m |
|
Beam angle |
>160° |
|
Ingress protection |
IP66 (waterproof) |
|
Strip width |
8mm |
|
Strip dimensions (IP66) |
8.3 × 2.0 mm |
|
Copper trace thickness |
2oz |
|
PCB layers |
Double layer (PRO Version) |
|
Cut points |
Every 6.25cm |
|
Lifespan |
50,000h |
|
Roll length |
10m (full roll) |
Choose this waterproof IP66 version whenever the strip will face moisture - outdoor facades, garden features, bathrooms or kitchen splash zones - while wanting the crispest, brightest 6000K daylight tone. If your installation is dry and indoors, the IP20 version is cheaper and slimmer. The same COB-528 series is also available in 3000K Warm White and 4000K Natural White; step down the colour temperature for a softer, cosier feel. At 528 LEDs/m and 1060 lm/m it's dense and bright for task lighting.
This strip requires a dedicated 24V DC power supply and cannot be connected directly to mains - size the driver with roughly 20% spare headroom (the configurator suggests ~12W or higher per metre). A controller is only needed if you want dimming; for a fixed Cold White strip like this, a simple 24V driver is sufficient. It is waterproof (IP66) and suitable for outdoor and wet areas; still use waterproof connectors and an appropriately rated driver for outdoor runs. Cut only at the marked cut points (every 6.25cm), and mount it in a suitable aluminium profile for the best heat dissipation and finish.
Rated IP66, this strip is protected against powerful water jets and heavy splashes, making it suitable for outdoor use, facades, garden and landscape features, and wet indoor areas such as bathrooms and kitchens. For a fully weatherproof result, pair it with waterproof connectors and an IP-rated (IP67) driver, and seal cut ends correctly.
Yes — it's rated IP66, so it's protected against heavy water jets and splashes, making it suitable for outdoor, garden and wet-area installations.
It's a crisp, bright, cool-daylight white — ideal for task areas and spaces where maximum clarity matters.
Every 6.25cm, at the marked cut points — trimming there won't damage the rest of the strip.
It runs from a standard 24V DC driver. For outdoor use, choose a waterproof/IP-rated driver and waterproof connectors.
| HUE Color | 6000K Cold White |
|---|---|
| Watts per meter | 10 |
| Water Resistance | IP66 Heat Shrink WP |
| Voltage | 24V |
| Lumens per meter | 1060 |
| Number of LEDs/ Meter | 528 |
From €28.34 €23.04
To €44.75 €36.38
From €38.11 €30.98
To €53.78 €43.72
From €41.91 €34.07
To €57.58 €46.81
From €38.41 €31.23
To €55.92 €45.46
From €42.35 €34.43
To €59.85 €48.66
From €41.50 €33.74
To €55.33 €44.98
This waterproof Cold White COB LED strip brings a crisp, bright 6000K daylight tone to outdoor and wet areas, rated IP66 with a continuous, dot-free line of light. At 1060 lm/m from 10 W and a dense 528 LEDs/m, it's built for bright task and accent lighting where moisture is a factor - garden features, facades, bathrooms - with a double PCB layer and 2oz copper paths for stable, cool-running performance.
|
Parameter |
Value |
|
SKU |
WP-COB-528-CW-396 |
|
Chip type |
COB (Spotless) |
|
Light type |
Cold White (single colour) |
|
Colour temperature |
6000K (Cold White) |
|
LEDs per metre |
528 |
|
Voltage |
24V DC |
|
Power per metre |
10W |
|
Luminous flux |
1060 lm/m |
|
Beam angle |
>160° |
|
Ingress protection |
IP66 (waterproof) |
|
Strip width |
8mm |
|
Strip dimensions (IP66) |
8.3 × 2.0 mm |
|
Copper trace thickness |
2oz |
|
PCB layers |
Double layer (PRO Version) |
|
Cut points |
Every 6.25cm |
|
Lifespan |
50,000h |
|
Roll length |
10m (full roll) |
Choose this waterproof IP66 version whenever the strip will face moisture - outdoor facades, garden features, bathrooms or kitchen splash zones - while wanting the crispest, brightest 6000K daylight tone. If your installation is dry and indoors, the IP20 version is cheaper and slimmer. The same COB-528 series is also available in 3000K Warm White and 4000K Natural White; step down the colour temperature for a softer, cosier feel. At 528 LEDs/m and 1060 lm/m it's dense and bright for task lighting.
This strip requires a dedicated 24V DC power supply and cannot be connected directly to mains - size the driver with roughly 20% spare headroom (the configurator suggests ~12W or higher per metre). A controller is only needed if you want dimming; for a fixed Cold White strip like this, a simple 24V driver is sufficient. It is waterproof (IP66) and suitable for outdoor and wet areas; still use waterproof connectors and an appropriately rated driver for outdoor runs. Cut only at the marked cut points (every 6.25cm), and mount it in a suitable aluminium profile for the best heat dissipation and finish.
Rated IP66, this strip is protected against powerful water jets and heavy splashes, making it suitable for outdoor use, facades, garden and landscape features, and wet indoor areas such as bathrooms and kitchens. For a fully weatherproof result, pair it with waterproof connectors and an IP-rated (IP67) driver, and seal cut ends correctly.
Yes — it's rated IP66, so it's protected against heavy water jets and splashes, making it suitable for outdoor, garden and wet-area installations.
It's a crisp, bright, cool-daylight white — ideal for task areas and spaces where maximum clarity matters.
Every 6.25cm, at the marked cut points — trimming there won't damage the rest of the strip.
It runs from a standard 24V DC driver. For outdoor use, choose a waterproof/IP-rated driver and waterproof connectors.
+353 24 904 96
