+353 24 904 96
LED Strip RGB • 30LED/m • 7.2W • 24V • IP20 • 275lm • 10mm • PRO Version 3oz Cooper paths
In stock
SKU
SPB-30-RGB-362
LED Strip RGB Colour Changing
This RGB colour-changing LED strip delivers full-spectrum colour at a standard-brightness 275 lm/m on a 24V strip, using 30 SMD LEDs/m (each a 3-chip RGB diode). With a double PCB layer and 3oz copper paths, it's a straightforward choice for colour accents on shelves, niches, steps and features up to around 300mm deep.
Key Features
- Full RGB colour changing: the complete colour spectrum on demand
- 275 lm/m at 7.2 W/m on 24V: standard-brightness colour output for accents
- 30 LEDs/m (SMD, 3-chip): colour mixing for accent lighting
- 3oz copper paths + Double PCB Layer (PRO Version): lower voltage drop and cooler operation than single-layer strips
- 3M 300 LSE adhesive base: strong, reliable mounting
- 24V: less power loss on longer runs compared to 12V equivalents
- 50,000h lifespan: long service life for install-and-forget projects
Technical Specification
|
Parameter |
Value |
|
SKU |
SPB-30-RGB-362 |
|
Chip type |
SMD (3-chip RGB) |
|
Light type |
RGB (colour changing) |
|
LEDs per metre |
30 |
|
Voltage |
24V DC |
|
Power per metre |
7.2W |
|
Luminous flux |
275 lm/m |
|
Ingress protection |
IP20 (non-waterproof) |
|
Strip width |
10mm |
|
Copper trace thickness |
3oz |
|
PCB layers |
Double layer (PRO Version) |
|
Wiring |
4-core (RGB) |
|
Adhesive |
3M 300 LSE |
|
Cut points |
Every 10cm |
|
Lifespan |
50,000h |
|
Roll length |
30m (full roll) |
Which Version Should You Choose?
Choose this 24V RGB version if you want dynamic colour for accent and feature lighting on longer runs, with less voltage drop than 12V. This is a standard-brightness strip (30 LED/m, 275 lm/m); for brighter colour output step up to a 60 or 120 LED/m RGB version. It's a pure RGB strip (no white channel); for colour plus a usable white, choose an RGB+W or RGB+CCT version. This is an IP20 strip for dry indoor use only; for moisture-prone areas, choose a waterproof (IP-rated) version.
Applications
- Colour accent and feature lighting for shelves, niches, steps and cabinets
- Cove and ceiling lighting for colour scenes and mood lighting
- Bar, club and hospitality colour lighting in dry indoor areas
- Display and signage colour effects
Installation
This strip runs on a dedicated 24V DC power supply and cannot be connected directly to mains - size the driver with roughly 20% spare headroom (the configurator suggests ~9W or higher per metre). It needs a compatible RGB controller to run colour effects; a plain single-colour dimmer won't work. Cut only at the marked cut points (every 10cm), and mount it in a suitable aluminium profile for the best heat dissipation and finish.
FAQ
Does this strip do white as well?
No — it's a pure RGB strip. For colour plus a usable white choose an RGB+W or RGB+CCT version instead.
What's the difference between the 12V and 24V versions?
Both give the same colour; the 24V version handles longer continuous runs with less voltage drop, while 12V suits shorter lengths.
How bright is 275 lm/m?
It's a standard-brightness output, ideal for colour accents; for brighter colour choose a 60 or 120 LED/m version.
How often can this strip be cut?
Every 10cm, at the marked cut points — trimming there won't damage the rest of the strip.
More Information
| Color Changing | RGB |
|---|---|
| Watts per meter | 7.2 |
| Water Resistance | IP20 Non Waterproof |
| Voltage | 24V |
| Lumens per meter | 275 |
Reviews
Write Your Own Review
Related Products
We found other products you might like!
-
LED Profile • SURFACE • "X" • SILVER • Aluminium • 2.02 Meters length • PRO • multi set •From €12.83 €10.43
To €26.21 €21.31
-
LED Profile • RECESSED • "B" • BLACK • Aluminium • 2.02 Meters length • PRO • multi set •From €20.91 €17.00
To €35.47 €28.84
-
LED Profile • RECESSED • "B" • SILVER • Aluminium • 2.02 Meters length • PRO • multi set •From €17.75 €14.43
To €32.31 €26.27
-
LED Profile • SURFACE • "RETO" • SILVER • Aluminium • 2.02 Meters length • PRO • multi set •From €57.70 €46.91
To €101.59 €82.59
-
LED Profile • RECESSED • ARCHITECTURAL • PLASTER IN • "ZATI" • SILVER • Aluminium • 2.02 Meters length • PRO • multi set •From €46.25 €37.60
To €91.34 €74.26
-
LED Profile • RECESSED • ARCHITECTURAL • PLASTER IN • "SUBLI" • WHITE • Aluminium • 2.02 Meters lenght • PRO • multi set •From €56.54 €45.97
To €84.21 €68.46
LED Strip RGB Colour Changing
This RGB colour-changing LED strip delivers full-spectrum colour at a standard-brightness 275 lm/m on a 24V strip, using 30 SMD LEDs/m (each a 3-chip RGB diode). With a double PCB layer and 3oz copper paths, it's a straightforward choice for colour accents on shelves, niches, steps and features up to around 300mm deep.
Key Features
- Full RGB colour changing: the complete colour spectrum on demand
- 275 lm/m at 7.2 W/m on 24V: standard-brightness colour output for accents
- 30 LEDs/m (SMD, 3-chip): colour mixing for accent lighting
- 3oz copper paths + Double PCB Layer (PRO Version): lower voltage drop and cooler operation than single-layer strips
- 3M 300 LSE adhesive base: strong, reliable mounting
- 24V: less power loss on longer runs compared to 12V equivalents
- 50,000h lifespan: long service life for install-and-forget projects
Technical Specification
|
Parameter |
Value |
|
SKU |
SPB-30-RGB-362 |
|
Chip type |
SMD (3-chip RGB) |
|
Light type |
RGB (colour changing) |
|
LEDs per metre |
30 |
|
Voltage |
24V DC |
|
Power per metre |
7.2W |
|
Luminous flux |
275 lm/m |
|
Ingress protection |
IP20 (non-waterproof) |
|
Strip width |
10mm |
|
Copper trace thickness |
3oz |
|
PCB layers |
Double layer (PRO Version) |
|
Wiring |
4-core (RGB) |
|
Adhesive |
3M 300 LSE |
|
Cut points |
Every 10cm |
|
Lifespan |
50,000h |
|
Roll length |
30m (full roll) |
Which Version Should You Choose?
Choose this 24V RGB version if you want dynamic colour for accent and feature lighting on longer runs, with less voltage drop than 12V. This is a standard-brightness strip (30 LED/m, 275 lm/m); for brighter colour output step up to a 60 or 120 LED/m RGB version. It's a pure RGB strip (no white channel); for colour plus a usable white, choose an RGB+W or RGB+CCT version. This is an IP20 strip for dry indoor use only; for moisture-prone areas, choose a waterproof (IP-rated) version.
Applications
- Colour accent and feature lighting for shelves, niches, steps and cabinets
- Cove and ceiling lighting for colour scenes and mood lighting
- Bar, club and hospitality colour lighting in dry indoor areas
- Display and signage colour effects
Installation
This strip runs on a dedicated 24V DC power supply and cannot be connected directly to mains - size the driver with roughly 20% spare headroom (the configurator suggests ~9W or higher per metre). It needs a compatible RGB controller to run colour effects; a plain single-colour dimmer won't work. Cut only at the marked cut points (every 10cm), and mount it in a suitable aluminium profile for the best heat dissipation and finish.
FAQ
Does this strip do white as well?
No — it's a pure RGB strip. For colour plus a usable white choose an RGB+W or RGB+CCT version instead.
What's the difference between the 12V and 24V versions?
Both give the same colour; the 24V version handles longer continuous runs with less voltage drop, while 12V suits shorter lengths.
How bright is 275 lm/m?
It's a standard-brightness output, ideal for colour accents; for brighter colour choose a 60 or 120 LED/m version.
How often can this strip be cut?
Every 10cm, at the marked cut points — trimming there won't damage the rest of the strip.
Write Your Own Review
