This RGB colour-changing LED strip delivers vivid, full-spectrum colour at 550 lm/m on a 24V strip, one of the most popular RGB models. With 60 SMD LEDs/m (each a 3-chip RGB diode), a double PCB layer and 3oz copper paths, it's a bright, reliable choice for colour accents on shelves, niches, steps and features up to around 300mm deep.
|
Parameter |
Value |
|
SKU |
SPB-60-RGB-24V-361 |
|
Chip type |
SMD (3-chip RGB) |
|
Light type |
RGB (colour changing) |
|
LEDs per metre |
60 |
|
Voltage |
24V DC |
|
Power per metre |
14.4W |
|
Luminous flux |
550 lm/m |
|
Ingress protection |
IP20 (non-waterproof) |
|
Strip width |
10.3mm |
|
Copper trace thickness |
3oz |
|
PCB layers |
Double layer (PRO Version) |
|
Wiring |
4-core (RGB) |
|
Adhesive |
3M 300 LSE |
|
Cut points |
Every 5cm |
|
Lifespan |
50,000h |
|
Roll length |
30m (full roll) |
Choose this 24V RGB version if you want bright, dynamic colour for accent and feature lighting on longer runs, with less voltage drop than 12V. It's available in 12V and 24V; the 24V here is better for longer runs. This is a pure RGB strip (no white channel); for colour plus a usable white, choose an RGB+W or RGB+CCT version. For higher brightness step up to the 120 LED/m RGB version. This is an IP20 strip for dry indoor use only; if the run will face moisture (bathroom, kitchen splash zones, outdoors), choose the IP66 waterproof version of the same series.
This strip runs on a dedicated 24V DC power supply and cannot be connected directly to mains - size the driver with roughly 20% spare headroom (the configurator suggests ~17W or higher per metre). It needs a compatible RGB controller to run colour effects; a plain single-colour dimmer won't work. Cut only at the marked cut points (every 5cm), and mount it in a suitable aluminium profile for the best heat dissipation and finish.
No — it's a pure RGB strip. For colour plus a usable white choose an RGB+W or RGB+CCT version instead.
Both give the same colour; the 24V version handles longer continuous runs with less voltage drop, while 12V suits shorter lengths.
No — this is the IP20 version, for dry indoor use only. For wet or outdoor areas, choose the IP66 waterproof version of the same series.
Every 5cm, at the marked cut points — trimming there won't damage the rest of the strip.
It needs an RGB controller (4-core wiring), plus a standard 24V DC driver for power.
| Color Changing | RGB |
|---|---|
| Watts per meter | 14.4 |
| Voltage | 24V |
| Lumens per meter | 550 |
From €34.27 €27.86
To €48.83 €39.70
From €34.44 €28.00
To €80.00 €65.04
From €48.25 €39.23
To €65.76 €53.46
From €56.54 €45.97
To €84.21 €68.46
From €52.28 €42.50
To €79.94 €64.99
From €17.74 €14.42
To €36.04 €29.30
This RGB colour-changing LED strip delivers vivid, full-spectrum colour at 550 lm/m on a 24V strip, one of the most popular RGB models. With 60 SMD LEDs/m (each a 3-chip RGB diode), a double PCB layer and 3oz copper paths, it's a bright, reliable choice for colour accents on shelves, niches, steps and features up to around 300mm deep.
|
Parameter |
Value |
|
SKU |
SPB-60-RGB-24V-361 |
|
Chip type |
SMD (3-chip RGB) |
|
Light type |
RGB (colour changing) |
|
LEDs per metre |
60 |
|
Voltage |
24V DC |
|
Power per metre |
14.4W |
|
Luminous flux |
550 lm/m |
|
Ingress protection |
IP20 (non-waterproof) |
|
Strip width |
10.3mm |
|
Copper trace thickness |
3oz |
|
PCB layers |
Double layer (PRO Version) |
|
Wiring |
4-core (RGB) |
|
Adhesive |
3M 300 LSE |
|
Cut points |
Every 5cm |
|
Lifespan |
50,000h |
|
Roll length |
30m (full roll) |
Choose this 24V RGB version if you want bright, dynamic colour for accent and feature lighting on longer runs, with less voltage drop than 12V. It's available in 12V and 24V; the 24V here is better for longer runs. This is a pure RGB strip (no white channel); for colour plus a usable white, choose an RGB+W or RGB+CCT version. For higher brightness step up to the 120 LED/m RGB version. This is an IP20 strip for dry indoor use only; if the run will face moisture (bathroom, kitchen splash zones, outdoors), choose the IP66 waterproof version of the same series.
This strip runs on a dedicated 24V DC power supply and cannot be connected directly to mains - size the driver with roughly 20% spare headroom (the configurator suggests ~17W or higher per metre). It needs a compatible RGB controller to run colour effects; a plain single-colour dimmer won't work. Cut only at the marked cut points (every 5cm), and mount it in a suitable aluminium profile for the best heat dissipation and finish.
No — it's a pure RGB strip. For colour plus a usable white choose an RGB+W or RGB+CCT version instead.
Both give the same colour; the 24V version handles longer continuous runs with less voltage drop, while 12V suits shorter lengths.
No — this is the IP20 version, for dry indoor use only. For wet or outdoor areas, choose the IP66 waterproof version of the same series.
Every 5cm, at the marked cut points — trimming there won't damage the rest of the strip.
It needs an RGB controller (4-core wiring), plus a standard 24V DC driver for power.
+353 24 904 96
