+353 24 904 96
LED Strip RGB+6000K • 60LED/m • 24V • 19.2W • IP66 • 1010lm • 10.3mm • PRO Version 3oz Cooper paths
In stock
SKU
SPB-60-RGBCW-405
LED Strip SMD RGB+CW 6000K IP66 Waterproof
This waterproof RGB+CW LED strip combines full-colour RGB with a dedicated 6000K Cold White channel - four colours in one diode - rated IP66 for outdoor and wet areas. With 60 SMD LEDs/m and 1010 lm/m from 19.2 W, it pairs vivid colour effects with a crisp, usable cold white, and the double PCB layer with 3oz copper paths keeps voltage drop and running temperature low.
Key Features
- Waterproof IP66: protected against heavy splashes and rain for outdoor and wet-area use
- RGB + dedicated 6000K Cold White: four colours in one diode - full colour plus a real, crisp white
- 1010 lm/m at 19.2 W/m on 24V: strong colour-changing output with low voltage drop
- 60 LEDs/m (SMD, 3-chip): rich, saturated colour mixing
- 3oz copper paths + Double PCB Layer (PRO Version): lower voltage drop and cooler operation than single-layer strips
- 3M 300 LSE adhesive base: strong, reliable mounting
- 50,000h lifespan: long service life for permanent installs
Technical Specification
|
Parameter |
Value |
|
SKU |
SPB-60-RGBCW-405 |
|
Chip type |
SMD (3-chip RGB + white) |
|
Colour |
RGBW (RGB + Cold White) |
|
Colour temperature (white channel) |
6000K (Cold White) |
|
LEDs per metre |
60 |
|
Voltage |
24V DC |
|
Power per metre |
19.2W |
|
Luminous flux |
1010 lm/m |
|
Ingress protection |
IP66 (waterproof) |
|
Strip width |
12mm |
|
Strip dimensions (IP66) |
12.3 × 2.3 mm |
|
Copper trace thickness |
3oz |
|
PCB layers |
Double layer (PRO Version) |
|
Wiring |
5-core (RGB + W) |
|
Adhesive |
3M 300 LSE |
|
Cut points |
Every 16.7cm |
|
Lifespan |
50,000h |
|
Roll length |
10m (full roll) |
Which Version Should You Choose?
Choose this waterproof IP66 RGB+CW version if you want full colour effects plus a crisp 6000K Cold White in areas that face moisture - outdoor facades, garden features or bathrooms. The same RGB+White SMD series is also available with 3000K Warm White and 4000K Natural White channels, in 30 or 60 LED densities, and in a dry IP20 build; pick a warmer white for cosier spaces, or the IP20 version for indoor dry runs. If you want fully tunable white (not just one fixed temperature), choose an RGB+CCT version; for a seamless, dot-free look, choose a COB version.
Applications
- Outdoor colour and accent lighting for facades and garden features
- Bathroom and wet-room colour lighting (splash-exposed areas)
- Cove and ceiling lighting where you want both cold white and colour scenes
- Signage and creative installations in damp or outdoor spaces
Installation
This strip runs on a dedicated 24V DC power supply and cannot be connected directly to mains - size the driver with roughly 20% spare headroom (the configurator suggests ~23W or higher per metre). Because it's an RGB+White strip it needs 5-core wiring and a compatible RGBW controller; a plain single-colour dimmer won't drive the colour channels. It is waterproof (IP66) and suitable for outdoor and wet areas; still use waterproof connectors and an appropriately rated driver for outdoor runs. Cut only at the marked cut points (every 16.7cm), and mount it in a suitable aluminium profile for the best heat dissipation and finish.
Waterproof
Rated IP66, this strip is protected against powerful water jets and heavy splashes, making it suitable for outdoor use, facades, garden and landscape features, and wet indoor areas such as bathrooms and kitchens. For a fully weatherproof result, pair it with waterproof connectors and an IP-rated (IP67) driver, and seal cut ends correctly.
FAQ
Can this strip be used outdoors?
Yes — it's rated IP66, so it's protected against heavy water jets and splashes, making it suitable for outdoor, garden and wet-area installations.
What does "4 colours in one diode" mean?
Each diode combines red, green and blue with a dedicated Cold White, so you get full RGB colour plus a real, usable 6000K white from a single strip.
What controller and wiring does it need?
It needs an RGBW controller and 5-core wiring (RGB + white), plus a standard 24V DC driver for power.
How often can this strip be cut?
Every 16.7cm, at the marked cut points — trimming there won't damage the rest of the strip.
More Information
| HUE Color | 6000K Cold White |
|---|---|
| Color Changing | RGBW |
| Watts per meter | 19.2 |
| Water Resistance | IP66 Heat Shrink WP |
| Voltage | 24V |
| Lumens per meter | 1010 |
| Number of LEDs/ Meter | 60 |
Reviews
Write Your Own Review
Related Products
We found other products you might like!
-
LED Profile • RECESSED • "Z" • BLACK • Aluminium • 2.02 Meters length • PRO • multi set •From €18.71 €15.21
To €33.27 €27.05
-
LED Profile • CORNERS • "C" • WHITE • Aluminium • 2.02 Meters length • PRO • multi set •From €23.17 €18.84
To €39.58 €32.18
-
LED Profile • SPECIAL APP • FURNITURE • "COSMO" • INOX GOLD • Aluminium • 2.02 Meters length • PRO • multi set •From €44.64 €36.29
To €60.31 €49.03
-
LED Profile • GLASS • FURNITURE • "E" • SILVER • Aluminium • 2.02 Meters length • PRO • multi set •From €19.29 €15.68
To €21.13 €17.18
-
LED Profile • GLASS • FURNITURE • "E" • WHITE • Aluminium • 2.02 Meters length • PRO • multi set •From €25.13 €20.43
To €26.60 €21.63
-
LED Profile • RECESSED • ARCHITECTURAL • PLASTER IN • "SUBLI" • WHITE • Aluminium • 2.02 Meters lenght • PRO • multi set •From €56.54 €45.97
To €84.21 €68.46
LED Strip SMD RGB+CW 6000K IP66 Waterproof
This waterproof RGB+CW LED strip combines full-colour RGB with a dedicated 6000K Cold White channel - four colours in one diode - rated IP66 for outdoor and wet areas. With 60 SMD LEDs/m and 1010 lm/m from 19.2 W, it pairs vivid colour effects with a crisp, usable cold white, and the double PCB layer with 3oz copper paths keeps voltage drop and running temperature low.
Key Features
- Waterproof IP66: protected against heavy splashes and rain for outdoor and wet-area use
- RGB + dedicated 6000K Cold White: four colours in one diode - full colour plus a real, crisp white
- 1010 lm/m at 19.2 W/m on 24V: strong colour-changing output with low voltage drop
- 60 LEDs/m (SMD, 3-chip): rich, saturated colour mixing
- 3oz copper paths + Double PCB Layer (PRO Version): lower voltage drop and cooler operation than single-layer strips
- 3M 300 LSE adhesive base: strong, reliable mounting
- 50,000h lifespan: long service life for permanent installs
Technical Specification
|
Parameter |
Value |
|
SKU |
SPB-60-RGBCW-405 |
|
Chip type |
SMD (3-chip RGB + white) |
|
Colour |
RGBW (RGB + Cold White) |
|
Colour temperature (white channel) |
6000K (Cold White) |
|
LEDs per metre |
60 |
|
Voltage |
24V DC |
|
Power per metre |
19.2W |
|
Luminous flux |
1010 lm/m |
|
Ingress protection |
IP66 (waterproof) |
|
Strip width |
12mm |
|
Strip dimensions (IP66) |
12.3 × 2.3 mm |
|
Copper trace thickness |
3oz |
|
PCB layers |
Double layer (PRO Version) |
|
Wiring |
5-core (RGB + W) |
|
Adhesive |
3M 300 LSE |
|
Cut points |
Every 16.7cm |
|
Lifespan |
50,000h |
|
Roll length |
10m (full roll) |
Which Version Should You Choose?
Choose this waterproof IP66 RGB+CW version if you want full colour effects plus a crisp 6000K Cold White in areas that face moisture - outdoor facades, garden features or bathrooms. The same RGB+White SMD series is also available with 3000K Warm White and 4000K Natural White channels, in 30 or 60 LED densities, and in a dry IP20 build; pick a warmer white for cosier spaces, or the IP20 version for indoor dry runs. If you want fully tunable white (not just one fixed temperature), choose an RGB+CCT version; for a seamless, dot-free look, choose a COB version.
Applications
- Outdoor colour and accent lighting for facades and garden features
- Bathroom and wet-room colour lighting (splash-exposed areas)
- Cove and ceiling lighting where you want both cold white and colour scenes
- Signage and creative installations in damp or outdoor spaces
Installation
This strip runs on a dedicated 24V DC power supply and cannot be connected directly to mains - size the driver with roughly 20% spare headroom (the configurator suggests ~23W or higher per metre). Because it's an RGB+White strip it needs 5-core wiring and a compatible RGBW controller; a plain single-colour dimmer won't drive the colour channels. It is waterproof (IP66) and suitable for outdoor and wet areas; still use waterproof connectors and an appropriately rated driver for outdoor runs. Cut only at the marked cut points (every 16.7cm), and mount it in a suitable aluminium profile for the best heat dissipation and finish.
Waterproof
Rated IP66, this strip is protected against powerful water jets and heavy splashes, making it suitable for outdoor use, facades, garden and landscape features, and wet indoor areas such as bathrooms and kitchens. For a fully weatherproof result, pair it with waterproof connectors and an IP-rated (IP67) driver, and seal cut ends correctly.
FAQ
Can this strip be used outdoors?
Yes — it's rated IP66, so it's protected against heavy water jets and splashes, making it suitable for outdoor, garden and wet-area installations.
What does "4 colours in one diode" mean?
Each diode combines red, green and blue with a dedicated Cold White, so you get full RGB colour plus a real, usable 6000K white from a single strip.
What controller and wiring does it need?
It needs an RGBW controller and 5-core wiring (RGB + white), plus a standard 24V DC driver for power.
How often can this strip be cut?
Every 16.7cm, at the marked cut points — trimming there won't damage the rest of the strip.
Write Your Own Review
