This waterproof outdoor RGB colour-changing LED strip delivers vivid, full-spectrum colour at 550 lm/m, rated IP66 for outdoor and wet areas. One of the most popular RGB models, it uses 60 SMD LEDs/m (each a 3-chip RGB diode) with a double PCB layer and 3oz copper paths - ideal for colour accents on shelves, niches, steps and outdoor features up to around 300mm deep.
|
Parameter |
Value |
|
SKU |
WP-SPB-60-RGB-24V-401 |
|
Chip type |
SMD (3-chip RGB) |
|
Light type |
RGB (colour changing) |
|
LEDs per metre |
60 |
|
Voltage |
24V DC |
|
Power per metre |
14.4W |
|
Luminous flux |
550 lm/m |
|
Ingress protection |
IP66 (waterproof) |
|
Strip width |
10.3mm |
|
Strip dimensions (IP66) |
10.3 × 2.3 mm |
|
Copper trace thickness |
3oz |
|
PCB layers |
Double layer (PRO Version) |
|
Wiring |
4-core (RGB) |
|
Adhesive |
3M 300 LSE |
|
Cut points |
Every 5cm |
|
Lifespan |
50,000h |
|
Roll length |
10m (full roll) |
Choose this waterproof IP66 RGB version if you want dynamic colour in areas that face moisture - outdoor facades, garden features, steps or bathrooms. It's available in 12V and 24V; this 24V version is better for longer runs with less voltage drop, while 12V suits shorter lengths. If your run is fully indoors and dry, an IP20 version is cheaper. This is a pure RGB strip (no white channel); for colour plus a usable white, choose an RGB+W version, or RGB+CCT for full colour plus tunable white. It suits installations up to around 300mm deep; for higher brightness step up to the ultra-high-bright 120 LED/m version.
This strip runs on a dedicated 24V DC power supply and cannot be connected directly to mains - size the driver with roughly 20% spare headroom (the configurator suggests ~17W or higher per metre). It needs a compatible RGB controller to run colour effects; a plain single-colour dimmer won't work. It is waterproof (IP66) and suitable for outdoor and wet areas; still use waterproof connectors and an appropriately rated driver for outdoor runs. Cut only at the marked cut points (every 5cm), and mount it in a suitable aluminium profile for the best heat dissipation and finish.
Rated IP66, this strip is protected against powerful water jets and heavy splashes, making it suitable for outdoor use, facades, garden and landscape features, and wet indoor areas such as bathrooms and kitchens. For a fully weatherproof result, pair it with waterproof connectors and an IP-rated (IP67) driver, and seal cut ends correctly.
Yes — it's rated IP66, so it's protected against heavy water jets and splashes, making it suitable for outdoor, garden and wet-area installations.
No — it's a pure RGB strip. For colour plus a usable white choose an RGB+W or RGB+CCT version instead.
Both give the same colour; the 24V version handles longer continuous runs with less voltage drop, while 12V suits shorter lengths.
Every 5cm, at the marked cut points — trimming there won't damage the rest of the strip.
It needs an RGB controller (4-core wiring), plus a standard 24V DC driver for power.
| Color Changing | RGB |
|---|---|
| Watts per meter | 14.4 |
| Water Resistance | IP66 Heat Shrink WP |
| Voltage | 24V |
| Lumens per meter | 550 |
| Number of LEDs/ Meter | 60 |
From €17.75 €14.43
To €32.31 €26.27
From €46.15 €37.52
To €61.82 €50.26
From €21.98 €17.87
To €38.39 €31.21
From €48.25 €39.23
To €65.76 €53.46
From €56.54 €45.97
To €84.21 €68.46
This waterproof outdoor RGB colour-changing LED strip delivers vivid, full-spectrum colour at 550 lm/m, rated IP66 for outdoor and wet areas. One of the most popular RGB models, it uses 60 SMD LEDs/m (each a 3-chip RGB diode) with a double PCB layer and 3oz copper paths - ideal for colour accents on shelves, niches, steps and outdoor features up to around 300mm deep.
|
Parameter |
Value |
|
SKU |
WP-SPB-60-RGB-24V-401 |
|
Chip type |
SMD (3-chip RGB) |
|
Light type |
RGB (colour changing) |
|
LEDs per metre |
60 |
|
Voltage |
24V DC |
|
Power per metre |
14.4W |
|
Luminous flux |
550 lm/m |
|
Ingress protection |
IP66 (waterproof) |
|
Strip width |
10.3mm |
|
Strip dimensions (IP66) |
10.3 × 2.3 mm |
|
Copper trace thickness |
3oz |
|
PCB layers |
Double layer (PRO Version) |
|
Wiring |
4-core (RGB) |
|
Adhesive |
3M 300 LSE |
|
Cut points |
Every 5cm |
|
Lifespan |
50,000h |
|
Roll length |
10m (full roll) |
Choose this waterproof IP66 RGB version if you want dynamic colour in areas that face moisture - outdoor facades, garden features, steps or bathrooms. It's available in 12V and 24V; this 24V version is better for longer runs with less voltage drop, while 12V suits shorter lengths. If your run is fully indoors and dry, an IP20 version is cheaper. This is a pure RGB strip (no white channel); for colour plus a usable white, choose an RGB+W version, or RGB+CCT for full colour plus tunable white. It suits installations up to around 300mm deep; for higher brightness step up to the ultra-high-bright 120 LED/m version.
This strip runs on a dedicated 24V DC power supply and cannot be connected directly to mains - size the driver with roughly 20% spare headroom (the configurator suggests ~17W or higher per metre). It needs a compatible RGB controller to run colour effects; a plain single-colour dimmer won't work. It is waterproof (IP66) and suitable for outdoor and wet areas; still use waterproof connectors and an appropriately rated driver for outdoor runs. Cut only at the marked cut points (every 5cm), and mount it in a suitable aluminium profile for the best heat dissipation and finish.
Rated IP66, this strip is protected against powerful water jets and heavy splashes, making it suitable for outdoor use, facades, garden and landscape features, and wet indoor areas such as bathrooms and kitchens. For a fully weatherproof result, pair it with waterproof connectors and an IP-rated (IP67) driver, and seal cut ends correctly.
Yes — it's rated IP66, so it's protected against heavy water jets and splashes, making it suitable for outdoor, garden and wet-area installations.
No — it's a pure RGB strip. For colour plus a usable white choose an RGB+W or RGB+CCT version instead.
Both give the same colour; the 24V version handles longer continuous runs with less voltage drop, while 12V suits shorter lengths.
Every 5cm, at the marked cut points — trimming there won't damage the rest of the strip.
It needs an RGB controller (4-core wiring), plus a standard 24V DC driver for power.
+353 24 904 96
