This waterproof RGB+CCT LED strip is a high-output 5-in-1 tape: full-colour RGB plus a fully tunable white from 2400K to 6000K, rated IP66 for outdoor and wet areas. At an ultra-high 1405 lm/m from 20 W it's built for demanding architectural and linear lighting, with a double PCB layer and 3oz copper paths for stable, cool-running performance over long runs.
|
Parameter |
Value |
|
SKU |
SPB-60-RGBCCT-66-422 |
|
Chip type |
SMD (3-chip RGB + CCT) |
|
Colour |
RGB+CCT (5-in-1) |
|
Colour temperature (white range) |
2400K - 6000K |
|
LEDs per metre |
60 |
|
Voltage |
24V DC |
|
Power per metre |
20W |
|
Luminous flux |
1405 lm/m |
|
Ingress protection |
IP66 (waterproof) |
|
Strip width |
12mm |
|
Strip dimensions (IP66) |
12.3 × 2.3 mm |
|
Copper trace thickness |
3oz |
|
PCB layers |
Double layer (PRO Version) |
|
Wiring |
6-core (RGB + CCT) |
|
Adhesive |
3M 300 LSE |
|
Cut points |
Every 10cm |
|
Lifespan |
75,000h |
|
Roll length |
10m (full roll) |
Choose this waterproof IP66 RGB+CCT version if you want the most flexible, high-output strip - full colour plus fully tunable white - in areas that face moisture, like outdoor facades, garden features or bathrooms. As an SMD strip with visible diodes it's ideal for deeper profiles and larger spaces (recommended up to around 600mm deep); for a seamless, dot-free look choose a COB RGB+CCT version instead. For dry indoor runs, choose an IP20 version. If you only need colour plus a single fixed white, an RGB+W strip is simpler and needs only 5-core wiring.
This strip runs on a dedicated 24V DC power supply and cannot be connected directly to mains - size the driver with roughly 20% spare headroom (the configurator suggests ~24W or higher per metre). As a 5-in-1 RGB+CCT strip it needs 6-core wiring and a compatible RGB+CCT controller; simpler RGB or RGBW controllers won't drive all channels. It is waterproof (IP66) and suitable for outdoor and wet areas; still use waterproof connectors and an appropriately rated driver for outdoor runs. Cut only at the marked cut points (every 10cm), and mount it in a suitable aluminium profile for the best heat dissipation and finish.
Rated IP66, this strip is protected against powerful water jets and heavy splashes, making it suitable for outdoor use, facades, garden and landscape features, and wet indoor areas such as bathrooms and kitchens. For a fully weatherproof result, pair it with waterproof connectors and an IP-rated (IP67) driver, and seal cut ends correctly.
Each diode combines red, green and blue with a tunable white, so a single strip gives you full colour effects plus complete control of white colour temperature from 2400K to 6000K.
Yes — it's rated IP66, so it's protected against heavy water jets and splashes, making it suitable for outdoor, garden and wet-area installations.
It needs a dedicated RGB+CCT controller and 6-core wiring, plus a standard 24V DC driver for power.
Every 10cm, at the marked cut points — trimming there won't damage the rest of the strip.
| Color Changing | RGBCCT |
|---|---|
| Watts per meter | 20 |
| Water Resistance | IP66 Heat Shrink WP |
| Voltage | 24V |
| Lumens per meter | 1405 |
| Number of LEDs/ Meter | 60 |
From €18.71 €15.21
To €33.27 €27.05
From €21.98 €17.87
To €38.39 €31.21
From €25.17 €20.46
To €41.57 €33.80
From €38.11 €30.98
To €53.78 €43.72
From €42.35 €34.43
To €59.85 €48.66
From €68.65 €55.81
To €171.95 €139.80
This waterproof RGB+CCT LED strip is a high-output 5-in-1 tape: full-colour RGB plus a fully tunable white from 2400K to 6000K, rated IP66 for outdoor and wet areas. At an ultra-high 1405 lm/m from 20 W it's built for demanding architectural and linear lighting, with a double PCB layer and 3oz copper paths for stable, cool-running performance over long runs.
|
Parameter |
Value |
|
SKU |
SPB-60-RGBCCT-66-422 |
|
Chip type |
SMD (3-chip RGB + CCT) |
|
Colour |
RGB+CCT (5-in-1) |
|
Colour temperature (white range) |
2400K - 6000K |
|
LEDs per metre |
60 |
|
Voltage |
24V DC |
|
Power per metre |
20W |
|
Luminous flux |
1405 lm/m |
|
Ingress protection |
IP66 (waterproof) |
|
Strip width |
12mm |
|
Strip dimensions (IP66) |
12.3 × 2.3 mm |
|
Copper trace thickness |
3oz |
|
PCB layers |
Double layer (PRO Version) |
|
Wiring |
6-core (RGB + CCT) |
|
Adhesive |
3M 300 LSE |
|
Cut points |
Every 10cm |
|
Lifespan |
75,000h |
|
Roll length |
10m (full roll) |
Choose this waterproof IP66 RGB+CCT version if you want the most flexible, high-output strip - full colour plus fully tunable white - in areas that face moisture, like outdoor facades, garden features or bathrooms. As an SMD strip with visible diodes it's ideal for deeper profiles and larger spaces (recommended up to around 600mm deep); for a seamless, dot-free look choose a COB RGB+CCT version instead. For dry indoor runs, choose an IP20 version. If you only need colour plus a single fixed white, an RGB+W strip is simpler and needs only 5-core wiring.
This strip runs on a dedicated 24V DC power supply and cannot be connected directly to mains - size the driver with roughly 20% spare headroom (the configurator suggests ~24W or higher per metre). As a 5-in-1 RGB+CCT strip it needs 6-core wiring and a compatible RGB+CCT controller; simpler RGB or RGBW controllers won't drive all channels. It is waterproof (IP66) and suitable for outdoor and wet areas; still use waterproof connectors and an appropriately rated driver for outdoor runs. Cut only at the marked cut points (every 10cm), and mount it in a suitable aluminium profile for the best heat dissipation and finish.
Rated IP66, this strip is protected against powerful water jets and heavy splashes, making it suitable for outdoor use, facades, garden and landscape features, and wet indoor areas such as bathrooms and kitchens. For a fully weatherproof result, pair it with waterproof connectors and an IP-rated (IP67) driver, and seal cut ends correctly.
Each diode combines red, green and blue with a tunable white, so a single strip gives you full colour effects plus complete control of white colour temperature from 2400K to 6000K.
Yes — it's rated IP66, so it's protected against heavy water jets and splashes, making it suitable for outdoor, garden and wet-area installations.
It needs a dedicated RGB+CCT controller and 6-core wiring, plus a standard 24V DC driver for power.
Every 10cm, at the marked cut points — trimming there won't damage the rest of the strip.
+353 24 904 96
