This waterproof outdoor RGB+WW LED strip combines full-colour RGB with a dedicated 3000K Warm White channel - four colours in one diode - rated IP66 for outdoor and wet areas. With 60 SMD LEDs/m and 970 lm/m from 19.2 W, it pairs vivid colour effects with a cosy, usable warm white, and the double PCB layer with 3oz copper paths keeps voltage drop and running temperature low.
|
Parameter |
Value |
|
SKU |
WP-SPB-60-RGBWW-403 |
|
Chip type |
SMD (3-chip RGB + white) |
|
Colour |
RGBW (RGB + Warm White) |
|
Colour temperature (white channel) |
3000K (Warm White) |
|
LEDs per metre |
60 |
|
Voltage |
24V DC |
|
Power per metre |
19.2W |
|
Luminous flux |
970 lm/m |
|
Ingress protection |
IP66 (waterproof) |
|
Strip width |
12.3mm |
|
Strip dimensions (IP66) |
12.3 × 2.3 mm |
|
Copper trace thickness |
3oz |
|
PCB layers |
Double layer (PRO Version) |
|
Wiring |
5-core (RGB + W) |
|
Adhesive |
3M 300 LSE |
|
Cut points |
Every 16.7cm |
|
Lifespan |
50,000h |
|
Roll length |
10m (full roll) |
Choose this waterproof IP66 RGB+WW version if you want full colour effects plus a cosy 3000K Warm White in areas that face moisture - outdoor facades, garden features or bathrooms. The same RGB+White SMD series is also available with 4000K Natural White and 6000K Cold White channels, in 30 or 60 LED densities, and in a dry IP20 build; pick a cooler white for cleaner light, or the IP20 version for indoor dry runs. If you want fully tunable white, choose an RGB+CCT version; for a seamless, dot-free look, choose a COB version.
This strip runs on a dedicated 24V DC power supply and cannot be connected directly to mains - size the driver with roughly 20% spare headroom (the configurator suggests ~23W or higher per metre). Because it's an RGB+White strip it needs 5-core wiring and a compatible RGBW controller; a plain single-colour dimmer won't drive the colour channels. It is waterproof (IP66) and suitable for outdoor and wet areas; still use waterproof connectors and an appropriately rated driver for outdoor runs. Cut only at the marked cut points (every 16.7cm), and mount it in a suitable aluminium profile for the best heat dissipation and finish.
Rated IP66, this strip is protected against powerful water jets and heavy splashes, making it suitable for outdoor use, facades, garden and landscape features, and wet indoor areas such as bathrooms and kitchens. For a fully weatherproof result, pair it with waterproof connectors and an IP-rated (IP67) driver, and seal cut ends correctly.
Yes — it's rated IP66, so it's protected against heavy water jets and splashes, making it suitable for outdoor, garden and wet-area installations.
Each diode combines red, green and blue with a dedicated Warm White, so you get full RGB colour plus a real, usable 3000K white from a single strip.
It needs an RGBW controller and 5-core wiring (RGB + white), plus a standard 24V DC driver for power.
Every 16.7cm, at the marked cut points — trimming there won't damage the rest of the strip.
| Color Changing | RGBW |
|---|---|
| Watts per meter | 19.2 |
| Water Resistance | IP66 Heat Shrink WP |
| Voltage | 24V |
| Lumens per meter | 970 |
| Number of LEDs/ Meter | 60 |
From €46.25 €37.60
To €91.34 €74.26
From €56.54 €45.97
To €84.21 €68.46
From €52.28 €42.50
To €79.94 €64.99
From €151.87 €123.47
To €218.29 €177.47
From €28.67 €23.31
To €54.80 €44.55
From €76.88 €62.50
To €122.37 €99.49
This waterproof outdoor RGB+WW LED strip combines full-colour RGB with a dedicated 3000K Warm White channel - four colours in one diode - rated IP66 for outdoor and wet areas. With 60 SMD LEDs/m and 970 lm/m from 19.2 W, it pairs vivid colour effects with a cosy, usable warm white, and the double PCB layer with 3oz copper paths keeps voltage drop and running temperature low.
|
Parameter |
Value |
|
SKU |
WP-SPB-60-RGBWW-403 |
|
Chip type |
SMD (3-chip RGB + white) |
|
Colour |
RGBW (RGB + Warm White) |
|
Colour temperature (white channel) |
3000K (Warm White) |
|
LEDs per metre |
60 |
|
Voltage |
24V DC |
|
Power per metre |
19.2W |
|
Luminous flux |
970 lm/m |
|
Ingress protection |
IP66 (waterproof) |
|
Strip width |
12.3mm |
|
Strip dimensions (IP66) |
12.3 × 2.3 mm |
|
Copper trace thickness |
3oz |
|
PCB layers |
Double layer (PRO Version) |
|
Wiring |
5-core (RGB + W) |
|
Adhesive |
3M 300 LSE |
|
Cut points |
Every 16.7cm |
|
Lifespan |
50,000h |
|
Roll length |
10m (full roll) |
Choose this waterproof IP66 RGB+WW version if you want full colour effects plus a cosy 3000K Warm White in areas that face moisture - outdoor facades, garden features or bathrooms. The same RGB+White SMD series is also available with 4000K Natural White and 6000K Cold White channels, in 30 or 60 LED densities, and in a dry IP20 build; pick a cooler white for cleaner light, or the IP20 version for indoor dry runs. If you want fully tunable white, choose an RGB+CCT version; for a seamless, dot-free look, choose a COB version.
This strip runs on a dedicated 24V DC power supply and cannot be connected directly to mains - size the driver with roughly 20% spare headroom (the configurator suggests ~23W or higher per metre). Because it's an RGB+White strip it needs 5-core wiring and a compatible RGBW controller; a plain single-colour dimmer won't drive the colour channels. It is waterproof (IP66) and suitable for outdoor and wet areas; still use waterproof connectors and an appropriately rated driver for outdoor runs. Cut only at the marked cut points (every 16.7cm), and mount it in a suitable aluminium profile for the best heat dissipation and finish.
Rated IP66, this strip is protected against powerful water jets and heavy splashes, making it suitable for outdoor use, facades, garden and landscape features, and wet indoor areas such as bathrooms and kitchens. For a fully weatherproof result, pair it with waterproof connectors and an IP-rated (IP67) driver, and seal cut ends correctly.
Yes — it's rated IP66, so it's protected against heavy water jets and splashes, making it suitable for outdoor, garden and wet-area installations.
Each diode combines red, green and blue with a dedicated Warm White, so you get full RGB colour plus a real, usable 3000K white from a single strip.
It needs an RGBW controller and 5-core wiring (RGB + white), plus a standard 24V DC driver for power.
Every 16.7cm, at the marked cut points — trimming there won't damage the rest of the strip.
+353 24 904 96
